Jump to content


Active Members
  • Content Count

  • Joined

  • Last visited

  • Days Won


Everything posted by chrizree

  1. Similar scenarios have been reported recently, both here in some threads and on Discord. Not sure if it's exactly the same but it sounds like it. As I've understood it, it's being checked to see if there are some real problems behind it all or a result of other circumstances.
  2. Did the PCs have different kinds of keyboards? Wireless? "Multi function" fancy keyboards (i.e. extra features beside being an actual keyboard, combined with mouse features, etc.)?
  3. Just add something, it's just to distinguish your instance. It's not related to any domain name or such. You can put a "Site Name" that is something like "SamSepiC2" and the description can be whatever, like "All my Hak5 gear in C2"... -ish... Or, the word "instance" isn't perhaps totally accurate, you can have multiple sites in one C2 instance I guess, it requires another license form than the community edition though.
  4. You can download some script from DuckToolKit and try, search for wifi https://ducktoolkit.com/userscripts
  5. OK, I spot a need for a longer "journey" of knowledge elevation here and sadly I don't have time for that at the moment, perhaps later or if someone else is able to step in
  6. What payload script are you using right now to get the passphrase of the "active" WLAN? Is it Powershell based?
  7. The APs on the Pineapple itself? Well, if they would burn in an "always on" mode, I wouldn't buy the product 😉 Just leave it running if you feel for it. It's one of the features to leave it somewhere doing its job.
  8. Just modify that payload (or create a new one) that puts all the available networks from the netsh output into an array and loop them through
  9. I would be really pleased with a signal level of -28 dBm (the closer the value is to 0, the stronger the signal). Tx dbm is the transmitting power.
  10. Do you have Hak5 devices in C2 other than your two LAN Turtles? Any difference when connecting to different devices or the same on all?
  11. I don't think there's really any need of more details since you seem to just have to move it around to get the optimal position of the Pineapple. If it was me, I wouldn't hunt for Mbps though, pumping YouTube videos through the device isn't within my use case scenario for the Pineapple.
  12. ok I see that you have made your mind up when it comes to future choices
  13. it all depends on what you are using the Pineapple for, when I did iperf3 tests some posts ago in this thread I got at least 50 Mbps in my attempts (I did a number of them over time at that point)
  14. What wireless network(s) did you try to mimic? What protection was configured for them? You can't "copy" a protected network and expect clients to connect to an open network on the Pineapple just simply because of the fact that the SSID is the same. And, if you mimic networks that are configured as open and still can't get clients to connect, how are your filters set up? ICS should work, but I rarely use it. Attach a USB WiFi adapter to the Nano instead and get internet access through that interface.
  15. If I remember the recent discussions on the Hak5 Discord server correct, things mentioned here are looked upon to try to find some fix for it. It seems to be an issue that too many ppl are experiencing to be setup or usage related. Not sure of any status though. I have never experienced these kind of problems, but it might be pure luck.
  16. I'm curious about how it's connected in detail and more specific the RPi4 that seems to have more than one wireless connection active at the same time. How is that RPi4 set up? Is it that RPi4 that you measure speed from? I guess so based on your note on the sketch ("I connect to Pineapple wireless through Pi4"). Why are you connecting the RPi4 to both the main AP/router and the Pineapple at the same time? When it comes to the Pineapple, it seems that the RPi4 is connected to the open AP (a guess based on the discussion so far in the thread) and the Pineapple is connected to your main AP/route
  17. If you run the following command on your Ubuntu WSL instance (with the Shark plugged in), do you get anything in return as output of the command or nothing? ip route show to match 2>/dev/null| grep -i | cut -d ' ' -f3 | grep -v
  18. Hmmm, that is truly strange... Is the Turtle brand new out of the box or have you (or someone else other than you) done anything with it that puts it in a state that is different from an "out of the box" experience? Any modules downloaded before that is active? Is it on the latest firmware? Have you tried to reset it back to default settings using a factory reset?
  19. OK, so, I guess you are connecting using ssh on the "USB" side of the Turtle, i.e. ssh to and then trying to get access to the network? I'm using that setup right now as I'm writing this and I have no problems ssh'ing into the Turtle and then accessing "outside" resources, i.e. ping to the local network works, as well as IP based ping and on domain names. I guess you have some issues with your local network then. Have you tried an alternative Ethernet cable, alternative ports in the switch, etc.? If you plug in another device (PC or such) to the network using an Ethernet cable, doe
  20. What address do you get from the network (you don't have to post it here, just make sure you get an expected IP address from the network you are connecting the Turtle to). Try to ping an IP address on the internet (for example, if that works, try to ping www.google.com, does that work as well? And... from where are you trying to connect? Is it from within the Turtle text based "GUI" when trying to download modules?
  21. First, ask in the correct section of the forum (i.e. the section for the LAN Turtle). Second, do you get any IP address for the Ethernet interface of the Turtle. Are you attaching the Turtle to any network using an Ethernet cable?
  22. well, I wouldn't categorize myself as an expert in any way, I just have some basic knowledge... If I was in your situation, I would try to eliminate possible problem scenarios one by one, now you have stepped through the way coming in from the Pineapple and "out" from it and nothing is alarmingly bad there as I can see it. You should get ok speeds. What kind of internet connection do you have and what speed should it offer from the ISP? Mobile, xDSL, fiber...? Is the Pineapple connected to your network directly via an access point or are there any intermediate equipment between your Pineapple
  • Create New...