Jump to content

chrizree

Active Members
  • Content Count

    492
  • Joined

  • Last visited

  • Days Won

    30

Everything posted by chrizree

  1. Tell some more details about your setup. How is the Tetra connected? Via the laptop using cable or connecting to the Huawei "MiFi" directly? What data are you expecting to get to the Tetra? What OS does the laptop run on?
  2. What OS are you running in your VM? Kali I guess, since it's what's discussed in this thread. Just want to be sure so that you aren't running some distro that doesn't even have it installed in the first place. Did you try (as mentioned in this thread) to run it with sudo?
  3. I think that you might be too eager to get the dessert when the main course isn't even ready to be served... in other words, the PS isn't all finished with the network stuff when the payload executes. I put in a sleep for 30 sec and I got the correct network in NAT mode. As I said before, using the "mynet" variable might get you into problems since it will show more than one network if both interfaces of the PS is up and running. You might also get into issues if not checking first that the nmap directory exists on the USB storage device that is attached to the PS. Check the cod
  4. The docs says "a 2-Amp USB power source" https://docs.hak5.org/hc/en-us/articles/360053346334-Setup-Basics The user manual that comes with the Mk7 also states 5V 2A https://fccid.io/2AA52MK7/Users-Manual/User-manual-4650996
  5. If you mean the open network on the Tetra, have you set up filters to allow connections?
  6. Since you say "I've set up the basics using the USB connection to a Windows machine", I assume that the ICS procedure has been a part of that, but I have to check just to be sure. https://docs.hak5.org/hc/en-us/articles/360058458313-Configuring-ICS-on-Windows
  7. You have set: #### OPTIONS INTERFACE='eth0' #interface of the outgoing interface eth0 is the internal interface, right? eth1 is the one that should get an IP from the network, at least on my PS. Also not sure what INTERFACE is used for. I'm not aware of that it is an internal parameter of the PS and it's not used anywhere else in your payload code. Haven't used it myself so it's news to me and I can't find it in the PS docs. May be correct though. Also be aware of that ip -o -f inet addr show | awk '/scope global/{sub(/[^.]+\//,"0/",$4);print $4}' will list both interface
  8. Check the sources.list entries (or whatever the Croc uses). Jessie is older than Stretch and will not offer/provide anything "stable". Jessie had EOL on June 30 2020 and it's defined as "oldoldstable". Stretch is "oldstable" and not default release. Buster is the current stable one, but I would not recommend messing around with changing any of this "just like that".
  9. Is that really the mentioned JSON file? Isn't it the Bash Bunny JSON file that is used along with the JS encoder for the Ducky? https://downloads.hak5.org/ducky https://github.com/hak5/bashbunny-payloads/tree/master/languages Line 290 in the jsencoder html file, if using default lang (US) change 'F10': '00,00,43' to 'F10': '02,00,43' Or the line in one of the alternative lang files (json) "F10":"00,00,43" to "F10":"02,00,43"
  10. Is your password containing uppercase letters? Try to type them all as lowercase and see if it works. I seem to remember that it was an "update feature".
  11. did you order the programmer? where does it say in the shop that the cable is automatically bundled with the programmer? it's a separate product, right?!
  12. What are you trying to accomplish? I guess you want to mimic those gathered SSIDs using your Mk7. Have you set up filters on your Pineapple so that it's possible to access your Mk7 using those SSIDs? Are you too close to the real SSIDs so that your connection attempts are actually trying to connect to the real SSIDs instead of your fake ones?
  13. You could ask in the C2 section of the forum, but there's not really any command to actually install the C2 server, it just starts the server. You have to be more specific in order to offer any help to solve your issues. What OS are you running your C2 instance on? Is it locally or in the cloud/on the internet? Using https or not? Started as a service or not? What video have you been watching? Etc...
  14. I don't know if it's a good thing to advise not to buy Hak5 devices on a Hak5 forum, but of course there are alternative paths to glory. Since I own a lot of Hak5 devices, I can just say that they are good. Bugs is always a part of the picture, especially when it's new devices such as the Mk7. Anyway, you could start with a simple PC and a home grade router as well. Learn the basics of networking first and you will be ready to use other tools soon. There are myriads of resources out there to dive into in order to elevate your knowledge. Even though Hak5 stuff is designed to be easy to use, the
  15. I can't answer to why you haven't got any reply from the Hak5 shop, but if your kit included a Mk7 Pineapple, then I'm very sure you have to stand in line and wait. There are also some other products that are out of stock at the moment if visiting the shop, so if your kit included some of those as well, then you will have to wait for those too. Nothing will be shipped until everything in the order is ready. Even though there could be some improvements to wish for when it comes to order status updates, I'm very sure that Hak5 won't trick you, you will get your stuff eventually. I know that ther
  16. Can you ping your local C2 server from your Mk7? Are necessary ports open on the C2 server making it possible for the Mk7 to communicate with the C2 instance?
  17. OK, I can't replicate that scenario sadly. The dates in my PineAP log is the expected date and time.
  18. I quote myself: "Get an ovpn file from your VPN service provider (or Tunnelbear to follow this example). Either it's one file only with certs and keys included, or a client config file along with separate key and certificate files. If the files are not included in one (1) file only, then the other files needs to be referred to in the config file. They probably already are if the VPN provider has chosen to keep them as separate files, but I often want to add absolute paths to those files." In other words... you need to get a relevant ovpn file from ExpressVPN and use that along with y
  19. Have you tried (re)formatting the SD card or tried another SD card?
  20. Can you explain the steps you take to produce the output, exactly what logs that are correct and incorrect, etc. so that it will be easier to track/find the source of your issues
  21. ok, great news, splitting things up to verify each part separately is always a good approach when experiencing issues similar to this situation, I can't see any problems for you to get it all working as intended
  22. ok, but I was primarily interested in your iptables rules, have you run the bb.sh script with success? I.e. gotten the status "found" and the ASCII art that tells you that the Bunny is connected to the internet. You have no route that includes 172.16.64.64
  23. try to edit the cmd file temporarily and skip the date/time stuff in the folder creation and run it once and see if it works better, that date/time stamp most likely needs to be modified before it can be used, i.e. the script needs to be altered so that it creates a date/time output that can be used without issues, just create a directory in the script called "test" as a subdir to slurp: set dst=%~d0\slurp\test You can also add PAUSE or SLEEP s (where s is number of seconds to sleep) to the end of the script so that you can catch the output I'm kind of rusty when it comes to Win
×
×
  • Create New...