Jump to content


Active Members
  • Content Count

  • Joined

  • Last visited

  • Days Won


Everything posted by chrizree

  1. I just have to add that I actually had a BT GPS device when digging a bit deeper in my "tech boxes" in the storage room. If I get some time in the near future, I will try it with the Owl and see if it works. About the VCC, is it the TPx connectors you are using? https://fccid.io/2AB87-OWL/Internal-Photos/Int-Photos-4547904 Edit: Oh, and another thing... set the desired bps for the serial device as well, otherwise the GPS perhaps won't produce any output at all, for example: stty -F /dev/ttyUSB0 38400
  2. Well, no dumb questions here 🙂 I guess it will be some other device in /dev than ttyACM (since the ACM kernel mod isn't possible to get installed according to previous discussion in this thread). But perhaps possible via some other serial device. If the gps is identified and working it should produce some kind of output using cat /dev/<device_name> Edit: I just tried my U-blox7 USB GPS device with my GL.iNet GL-AR150 router that shares the same architecture as many of the Hak5 devices and it was no problem installing the kmod-usb-acm package. Getting output from the GPS worked perfe
  3. it's not the correct architecture as it seems, that link is for arm cortex, but the Owl is a MIPS24kc, and it's not always the case that you get all the dependencies like you get when running a full blown Linux distro, so you might be left with things missing, you could try though, but it will be "trial and horror" most likely
  4. I guess you are kind of out of luck on this one. To get access to the GPS device you will most likely need the ACM kmod and that will not install on the Owl since it has an older kernel than the packages available using opkg requires. The Owl is running kernel 4.14.140 and the kmod-usb-acm package that is available for download and install has a kernel dependency of 4.14.209 (you will get an error thrown back at you when trying to run opkg install kmod-usb-acm as per below). root@Owl:~# opkg install kmod-usb-acm Installing kmod-usb-acm (4.14.209-1) to root... Downloading http://downlo
  5. I'm on 2.7.0 with no modules loaded at all. MAC address lookup works and I can see logged probes for different devices in the recon result list. So, I can't reproduce your scenario sadly. What browser/OS are you using?
  6. If you're on Windows, have you tried this tool? https://www.sdcard.org/downloads/formatter/
  7. OK, according to the logic in that troubleshooting "howto" and your previous description of your scenario, the problem is linked to the SD card, not the Ducky. In what way have you formatted the SD card(s)? The way I linked in a previous post, or in some other way?
  8. OK... we have to sort some things out here to get some relevant answers to your problems/questions. What pre-written scripts are you referring to? Is it some generated using the ducktoolkit.com web site (or some posted by users on that site)? Or from elsewhere? What email service are you using in your scripts? Something self-hosted or, for example, Gmail? I just created a payload using the ducktoolkit.com web site and it was running OK apart from one detail, I had to add the port number to the script before it worked, AND... if you are using Gmail, you have to make sure you haven't got any 2FA
  9. are the filters set to allow connections?
  10. this doesn't seem right... you should never insert the SD card *after* you have plugged in the Ducky, the SD card should be inserted in the Ducky when it's "cold", i.e. *before* plugging it in to the computer where the payload is to be used
  11. Tried /sys/kernel/debug/crashlog ?
  12. I guess the support for the Tetra (and the Nano) will continue to get "lackier" as time goes. They are part of past generations now and won't get official support any longer (see link below). It's of course possible to continue to develop and use modules for them, but my simple guess is that the absolute majority of users will slide over to the Mk7. That's where the future is when it comes to tech ananas. It's like living in a small village, the young seekers move to the flashy cities and the old ppl stays and in that case you have to repair your tractor yourself 😉 https://forums.hak5.org
  13. You can always try to push for a return of the Ducky. The only way I can see you could get more help here is to describe all the steps you make in detail (from very start to finish) so that ppl here can try to find something that's missing in the process. Other from that, only a "hands on" support scenario is the way forward as I see it, but that could be difficult if you don't have anyone close that can assist you irl.
  14. The Nano has problems that seems to be kernel panics when running a VPN client on it. No solution for it as I have seen. Discussed in the following thread lately: https://forums.hak5.org/topic/53502-nano-crash-and-reboot-when-trying-to-establish-vpn-connection/ (I would advise not to post private keys in the forum, but I guess it's a dummy sample...)
  15. You can also try to format the SD card in the same way as I've described it in my post linked below. It's aimed for the WiFi Pineapple Nano, but I use the same procedure for the Ducky as well, so it's "transparent". https://forums.hak5.org/topic/53331-wifi-pineapple-nano-sd-card-not-detecting/?do=findComment&comment=333618
  16. The inject.bin file is to be placed in the root of the SD card, no subfolder
  17. There's no 2GB limit, you just have to use the correct file system type https://docs.hak5.org/hc/en-us/articles/360010555133-What-file-systems-are-supported- I just tried a Sandisk Ultra 32GB FAT32 formatted Micro SD card with my Ducky and it worked all fine (although I will stick to my 128MB card for my Ducky, it's more than enough for an inject.bin file)
  18. My guess is that you will be able to get faster response using Metasploit IRC or Slack services (even if there of course are knowledgeable folks around here too) https://www.metasploit.com/help
  19. In order to give advise, I need to know a bit more about your situation. Have you tried any of the ideas that you describe in the post? If so, what parts do you have problems with? Reading between the lines, I can't seem to get the feeling that you have tried anything yet and it's just an idea at the moment. I can't see why it wouldn't be possible to combine payloads into one as you aren't cemented to use only one predefined payload that you grab from GitHub per switch. You could create a "monstrously" big combined script and execute it using just one switch. If you are studying in a program t
  20. It's not that much of an issue, just order a new one. You could try to reformat the SD card first though, just to be sure it's not bad in some way (even if it seems to work with your Ducky).
  21. If trying to track (geographically) iOS devices using version 14, it can be a bit of a challenge since they randomize mac addresses for that specific reason (making it harder to be tracked as you move). It was (is?) a default feature of Android 10 as well, but not sure if it's enabled by default on other versions. However, I don't really see the use of trying to track (read; stalk) someone with a Kali box. Then you have to be in close proximity, so you will know the location of the individual anyway.
  22. What versions of Ubuntu have you tried? The ifconfig command is used by the wp6.sh script file, but ifconfig isn't a part of later versions of Ubuntu per default. Hence the error messages that you get from the wp6.sh script file (and also adds to the fact that it doesn't work since there's no ifconfig command to bring up interfaces, etc.). If you don't want to rewrite the wp6.sh file yourself using the ip command (or such equivalent in newer Ubuntu versions), you can install ifconfig using the command below and see if the wp6.sh script gets a bit more successful. The same goes for the route co
  23. If you insert the USB Rubber Ducky, then it should not show up in the Explorer. But, if you remove the SD card from the USB Rubber Ducky, insert the SD card into an SD card reader and then plug the SD card reader into a PC, it will show up in the Explorer.
  24. What test did you run to verify the USB port? Have you tried the Ducky on several computers or just one? The "howto" I posted previously works, so in that case the Ducky might be faulty. Submit a ticket @ the Hak5 Shop for further assistance. I would try the Ducky on more computers than just one first though.
  25. Have you tried some other SD card with the Nano? In what way is the current SD card formatted? If you scan the SD card for errors using a computer, does it show anything that might suggest that the SD card is bad in some way?
  • Create New...