Jump to content

chrizree

Active Members
  • Content Count

    163
  • Joined

  • Last visited

  • Days Won

    11

Everything posted by chrizree

  1. this doesn't seem right... you should never insert the SD card *after* you have plugged in the Ducky, the SD card should be inserted in the Ducky when it's "cold", i.e. *before* plugging it in to the computer where the payload is to be used
  2. Tried /sys/kernel/debug/crashlog ?
  3. I guess the support for the Tetra (and the Nano) will continue to get "lackier" as time goes. They are part of past generations now and won't get official support any longer (see link below). It's of course possible to continue to develop and use modules for them, but my simple guess is that the absolute majority of users will slide over to the Mk7. That's where the future is when it comes to tech ananas. It's like living in a small village, the young seekers move to the flashy cities and the old ppl stays and in that case you have to repair your tractor yourself 😉 https://forums.hak5.org
  4. You can always try to push for a return of the Ducky. The only way I can see you could get more help here is to describe all the steps you make in detail (from very start to finish) so that ppl here can try to find something that's missing in the process. Other from that, only a "hands on" support scenario is the way forward as I see it, but that could be difficult if you don't have anyone close that can assist you irl.
  5. The Nano has problems that seems to be kernel panics when running a VPN client on it. No solution for it as I have seen. Discussed in the following thread lately: https://forums.hak5.org/topic/53502-nano-crash-and-reboot-when-trying-to-establish-vpn-connection/ (I would advise not to post private keys in the forum, but I guess it's a dummy sample...)
  6. You can also try to format the SD card in the same way as I've described it in my post linked below. It's aimed for the WiFi Pineapple Nano, but I use the same procedure for the Ducky as well, so it's "transparent". https://forums.hak5.org/topic/53331-wifi-pineapple-nano-sd-card-not-detecting/?do=findComment&comment=333618
  7. The inject.bin file is to be placed in the root of the SD card, no subfolder
  8. There's no 2GB limit, you just have to use the correct file system type https://docs.hak5.org/hc/en-us/articles/360010555133-What-file-systems-are-supported- I just tried a Sandisk Ultra 32GB FAT32 formatted Micro SD card with my Ducky and it worked all fine (although I will stick to my 128MB card for my Ducky, it's more than enough for an inject.bin file)
  9. My guess is that you will be able to get faster response using Metasploit IRC or Slack services (even if there of course are knowledgeable folks around here too) https://www.metasploit.com/help
  10. In order to give advise, I need to know a bit more about your situation. Have you tried any of the ideas that you describe in the post? If so, what parts do you have problems with? Reading between the lines, I can't seem to get the feeling that you have tried anything yet and it's just an idea at the moment. I can't see why it wouldn't be possible to combine payloads into one as you aren't cemented to use only one predefined payload that you grab from GitHub per switch. You could create a "monstrously" big combined script and execute it using just one switch. If you are studying in a program t
  11. It's not that much of an issue, just order a new one. You could try to reformat the SD card first though, just to be sure it's not bad in some way (even if it seems to work with your Ducky).
  12. If trying to track (geographically) iOS devices using version 14, it can be a bit of a challenge since they randomize mac addresses for that specific reason (making it harder to be tracked as you move). It was (is?) a default feature of Android 10 as well, but not sure if it's enabled by default on other versions. However, I don't really see the use of trying to track (read; stalk) someone with a Kali box. Then you have to be in close proximity, so you will know the location of the individual anyway.
  13. What versions of Ubuntu have you tried? The ifconfig command is used by the wp6.sh script file, but ifconfig isn't a part of later versions of Ubuntu per default. Hence the error messages that you get from the wp6.sh script file (and also adds to the fact that it doesn't work since there's no ifconfig command to bring up interfaces, etc.). If you don't want to rewrite the wp6.sh file yourself using the ip command (or such equivalent in newer Ubuntu versions), you can install ifconfig using the command below and see if the wp6.sh script gets a bit more successful. The same goes for the route co
  14. If you insert the USB Rubber Ducky, then it should not show up in the Explorer. But, if you remove the SD card from the USB Rubber Ducky, insert the SD card into an SD card reader and then plug the SD card reader into a PC, it will show up in the Explorer.
  15. What test did you run to verify the USB port? Have you tried the Ducky on several computers or just one? The "howto" I posted previously works, so in that case the Ducky might be faulty. Submit a ticket @ the Hak5 Shop for further assistance. I would try the Ducky on more computers than just one first though.
  16. Have you tried some other SD card with the Nano? In what way is the current SD card formatted? If you scan the SD card for errors using a computer, does it show anything that might suggest that the SD card is bad in some way?
  17. It will be saved where you tell it to be saved when running java to encode the script. If you run it as in my example above, it will be put in the folder where you are located at the moment when executing java. If you want to direct it elsewhere in the file system, you just add the path before "inject.bin", such as; /root/inject.bin
  18. The Mk7 has had the following message for a while now in the shop, and if it was 6 days ago that you placed your order, then you where most likely "included" in that backorder. "This item is currently backordered. Shipping estimate: 10-15 days."
  19. Is this the same problem as the one you posted in a thread less than 24 hours ago or is this something else you need the answer for? https://forums.hak5.org/topic/53746-usb-not-recognised/ Download duckencoder https://github.com/hak5darren/USB-Rubber-Ducky/blob/master/duckencoder.jar Make sure you have access to java on the PC where the USB Rubber Ducky payload script will be converted to an inject.bin file Create a payload script for the USB Rubber Ducky using a text editor of choice, for example: DELAY 5000 GUI r DELAY 3000 STRING notepad.exe ENTER DELAY
  20. Have you tried connecting to the Nano with some other client than the Kali based Raspberry Pi? If you ssh into the Nano and run ps ax | grep [n]ginx , does it show a running nginx process (or two actually, a master and worker process). Is the master process started with the /etc/nginx/nginx.conf file as a parameter? If you cat the /etc/nginx/nginx.conf file, does it contain a server segment specifying port 1471 and server name pineapple? These are things that normally shouldn't change at all, but just to make sure you have a running web server on the Nano to accept client reques
  21. I guess you have already tried the steps in the firmware recovery procedure. https://docs.hak5.org/hc/en-us/articles/360010471774-Firmware-Recovery
  22. I just went through the steps in the Hak5 documentation web page (linked below) about allowing internet connection sharing and it all worked without any problems. I tried it on a fairly recent install of Windows 10 Home (2004, fully updated) that has never been touched before by the Bunny. One thing to pay special attention to in the article is step 5 as it might be misinterpreted as step 4 has been recently read. It's easy to let the brain jump to conclusions when heading over from step 4 to step 5. First (in step 4) you read "Identify Bash Bunny interface" and then in step 5 it's easy to jus
  23. Have you tried different SD cards? Most often, problems like the one you describe has to do with faulty SD cards or that they are formatted in a less successful way. There's even a thread about this topic just below this one in the list of threads in the USB Rubber Ducky part of the forum. https://forums.hak5.org/topic/53387-red-led/
  24. Have you tried following this instruction? https://docs.hak5.org/hc/en-us/articles/360049664554-Cloud-C2-setup-with-self-signed-SSL-certificates Judging from your hostname, I guess it's locally hosted and not a public domain name which is needed if using the standard Let's Encrypt way of using certs
  25. The RTL8812AU is known to produce issues with the Nano, it just resets/reboots when trying to bring the interface up. I have no current status for the other chipsets that you are listing, but I have adapters equipped with those chipsets so I could give them a try sometime in the near future if I get some time for it. The USB WiFi adapter that I'm successfully using with my Nano is based on Ralink RT5370 (the same that is sold in the Hak5 shop). https://shop.hak5.org/products/ralink-usb-wifi-rt5370
×
×
  • Create New...