Jump to content

Belpheg0rsPrime

Members
  • Content Count

    1
  • Joined

  • Last visited

About Belpheg0rsPrime

  • Rank
    Newbie
  1. Hi all, With the addition of MT7612U in 2.6.0 I picked myself up this wireless USB adapter. Unbeknownst to me, it presents itself as a USB Mass Storage Device for Windows drivers. I know that I need to use /etc/usb-mode.json to make the device fallback into being the wireless adapter but I am not sure what to add. I have tried a combination of this link and this link with its wiki entry to try and solve it and I came up with this as the result. "0e8d:2870": { "*": { "t_vendor": 3725, "t_product": [ 10352 ], "mode": "StandardEject", "msg": [ ] } }, This config didn't work so I was hoping someone could either tell me what I should have in the config or point me in the right direction? Here is the output from lsusb: root@Pineapple:~# lsusb -t /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M |__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=ath9k_htc, 480M |__ Port 2: Dev 6, If 0, Class=Mass Storage, Driver=usb-storage, 480M |__ Port 3: Dev 11, If 0, Class=Mass Storage, Driver=usb-storage, 480M root@Pineapple:~# lsusb Bus 001 Device 006: ID 05e3:0745 Genesys Logic, Inc. Logilink CR0012 Bus 001 Device 003: ID 0cf3:9271 Qualcomm Atheros Communications AR9271 802.11n Bus 001 Device 011: ID 0e8d:2870 MediaTek Inc. Bus 001 Device 002: ID 058f:6254 Alcor Micro Corp. USB Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub root@Pineapple:~# lsusb -D /dev/bus/usb/001/011 Device: ID 0e8d:2870 MediaTek Inc. [15/3605] Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0e8d MediaTek Inc. idProduct 0x2870 bcdDevice 0.01 iManufacturer 1 Љ iProduct 2 Љ iSerial 3 Љ bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 160mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0002 (Bus Powered) Remote Wakeup Enabled I have checked lsmod and the MT76* modules are loaded. I know this probably doesn't apply here but the kernel is on 4.14 and MT76 is normally supported in 4.19+. Thanks in advance for any help!
×
×
  • Create New...