Jump to content

8uck1337

Members
  • Content Count

    5
  • Joined

  • Last visited

About 8uck1337

  • Rank
    Newbie

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. I don't want to be that guy, but I feel like this thing is worthless.. I have had nothing but issues and absolutely no help from anybody.. I have tried the fourms, the customer support lines, and the googles. I can't find anything that helps. 😕
  2. Hey, so I am having a similar issue. I have an Alfa USB card that works fine, however, I cannot get the RT5370 that was supplied with my pineapple from Hak5 to work at all. My dmesg shows the following when I connect the adapter..... [ 145.050000] usb 1-1.3: new low-speed USB device number 5 using ehci-platform [ 145.130000] usb 1-1.3: device descriptor read/64, error -32 [ 145.320000] usb 1-1.3: device descriptor read/64, error -32 [ 145.510000] usb 1-1.3: new low-speed USB device number 6 using ehci-platform [ 145.590000] usb 1-1.3: device descriptor read/64, error -32 [ 145.810000] usb 1-1.3: device descriptor read/64, error -32 [ 146.010000] usb 1-1.3: new low-speed USB device number 7 using ehci-platform [ 146.430000] usb 1-1.3: device not accepting address 7, error -32 [ 146.550000] usb 1-1.3: new low-speed USB device number 8 using ehci-platform [ 146.970000] usb 1-1.3: device not accepting address 8, error -32 [ 146.970000] usb 1-1-port3: unable to enumerate USB device
  3. Here is my ifconfig results also... eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 172.16.42.42 netmask 255.255.255.0 broadcast 172.16.42.255 inet6 fe80::e15b:269c:3990:2ce3 prefixlen 64 scopeid 0x20<link> ether 00:c0:ca:a7:77:cf txqueuelen 1000 (Ethernet) RX packets 3978 bytes 1309680 (1.2 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 2786 bytes 988923 (965.7 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 4101 bytes 1367151 (1.3 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 4101 bytes 1367151 (1.3 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 mlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.139 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 fe80::b46c:d874:2ef8:5aed prefixlen 64 scopeid 0x20<link> ether b4:ae:2b:dc:82:7b txqueuelen 1000 (Ethernet) RX packets 89917 bytes 94606327 (90.2 MiB) RX errors 0 dropped 43 overruns 0 frame 0 TX packets 65445 bytes 6512436 (6.2 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  4. Here is my system log also. Sun May 19 04:21:03 2019 kern.info kernel: [ 1.210000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. Sun May 19 04:21:03 2019 kern.info kernel: [ 1.220000] 8021q: 802.1Q VLAN Support v1.8 Sun May 19 04:21:03 2019 kern.info kernel: [ 1.230000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. Sun May 19 04:21:03 2019 kern.info kernel: [ 1.240000] Freeing unused kernel memory: 240K Sun May 19 04:21:03 2019 user.info kernel: [ 2.780000] init: Console is alive Sun May 19 04:21:03 2019 user.info kernel: [ 2.780000] init: - watchdog - Sun May 19 04:21:03 2019 kern.info kernel: [ 5.440000] usbcore: registered new interface driver usbfs Sun May 19 04:21:03 2019 kern.info kernel: [ 5.440000] usbcore: registered new interface driver hub Sun May 19 04:21:03 2019 kern.info kernel: [ 5.450000] usbcore: registered new device driver usb Sun May 19 04:21:03 2019 kern.notice kernel: [ 5.510000] SCSI subsystem initialized Sun May 19 04:21:03 2019 kern.info kernel: [ 5.520000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Sun May 19 04:21:03 2019 kern.info kernel: [ 5.520000] ehci-platform: EHCI generic platform driver Sun May 19 04:21:03 2019 kern.info kernel: [ 5.530000] ehci-platform ehci-platform: EHCI Host Controller Sun May 19 04:21:03 2019 kern.info kernel: [ 5.530000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1 Sun May 19 04:21:03 2019 kern.info kernel: [ 5.540000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000 Sun May 19 04:21:03 2019 kern.info kernel: [ 5.570000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00 Sun May 19 04:21:03 2019 kern.info kernel: [ 5.570000] hub 1-0:1.0: USB hub found Sun May 19 04:21:03 2019 kern.info kernel: [ 5.570000] hub 1-0:1.0: 1 port detected Sun May 19 04:21:03 2019 kern.info kernel: [ 5.580000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Sun May 19 04:21:03 2019 kern.info kernel: [ 5.590000] ohci-platform: OHCI generic platform driver Sun May 19 04:21:03 2019 kern.info kernel: [ 5.590000] uhci_hcd: USB Universal Host Controller Interface driver Sun May 19 04:21:03 2019 kern.info kernel: [ 5.610000] usbcore: registered new interface driver usb-storage Sun May 19 04:21:03 2019 user.info kernel: [ 5.850000] init: - preinit - Sun May 19 04:21:03 2019 kern.info kernel: [ 5.970000] usb 1-1: new high-speed USB device number 2 using ehci-platform Sun May 19 04:21:03 2019 kern.info kernel: [ 6.410000] hub 1-1:1.0: USB hub found Sun May 19 04:21:03 2019 kern.info kernel: [ 6.430000] hub 1-1:1.0: 4 ports detected Sun May 19 04:21:03 2019 kern.notice kernel: [ 6.590000] random: procd urandom read with 11 bits of entropy available Sun May 19 04:21:03 2019 kern.info kernel: [ 6.820000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform Sun May 19 04:21:03 2019 user.info kernel: [ 6.850000] mount_root: loading kmods from internal overlay Sun May 19 04:21:03 2019 kern.info kernel: [ 7.120000] usb 1-1.2: new high-speed USB device number 4 using ehci-platform Sun May 19 04:21:03 2019 kern.notice kernel: [ 7.150000] jffs2: notice: (327) jffs2_build_xattr_subsystem: complete building xattr subsystem, 2 of xdatum (0 unchecked, 2 orphan) and 2 of xref (0 dead, 2 orphan) found. Sun May 19 04:21:03 2019 user.info kernel: [ 7.160000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab Sun May 19 04:21:03 2019 user.info kernel: [ 7.180000] block: extroot: not configured Sun May 19 04:21:03 2019 kern.notice kernel: [ 7.210000] jffs2: notice: (323) jffs2_build_xattr_subsystem: complete building xattr subsystem, 2 of xdatum (0 unchecked, 2 orphan) and 2 of xref (0 dead, 2 orphan) found. Sun May 19 04:21:03 2019 kern.info kernel: [ 7.250000] usb-storage 1-1.2:1.0: USB Mass Storage device detected Sun May 19 04:21:03 2019 kern.info kernel: [ 7.270000] scsi host0: usb-storage 1-1.2:1.0 Sun May 19 04:21:03 2019 user.info kernel: [ 7.350000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab Sun May 19 04:21:03 2019 user.info kernel: [ 7.360000] block: extroot: not configured Sun May 19 04:21:03 2019 user.info kernel: [ 7.360000] mount_root: switching to jffs2 overlay Sun May 19 04:21:03 2019 user.info kernel: [ 7.420000] procd: - early - Sun May 19 04:21:03 2019 user.info kernel: [ 7.420000] procd: - watchdog - Sun May 19 04:21:03 2019 user.info kernel: [ 8.330000] procd: - ubus - Sun May 19 04:21:03 2019 kern.notice kernel: [ 8.580000] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE 0933 PQ: 0 ANSI: 6 Sun May 19 04:21:03 2019 kern.notice kernel: [ 8.670000] sd 0:0:0:0: [sda] 15564800 512-byte logical blocks: (7.96 GB/7.42 GiB) Sun May 19 04:21:03 2019 kern.notice kernel: [ 8.690000] sd 0:0:0:0: [sda] Write Protect is off Sun May 19 04:21:03 2019 kern.debug kernel: [ 8.690000] sd 0:0:0:0: [sda] Mode Sense: 21 00 00 00 Sun May 19 04:21:03 2019 kern.notice kernel: [ 8.690000] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA Sun May 19 04:21:03 2019 kern.info kernel: [ 8.710000] sda: sda1 Sun May 19 04:21:03 2019 kern.notice kernel: [ 8.720000] sd 0:0:0:0: [sda] Attached SCSI removable disk Sun May 19 04:21:03 2019 user.info kernel: [ 9.360000] procd: - init - Sun May 19 04:21:03 2019 kern.info kernel: [ 13.250000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68 Sun May 19 04:21:03 2019 kern.info kernel: [ 13.250000] Backport generated by backports.git backports-20151218-0-g2f58d9d Sun May 19 04:21:03 2019 kern.debug kernel: [ 13.410000] ath: EEPROM regdomain: 0x0 Sun May 19 04:21:03 2019 kern.debug kernel: [ 13.410000] ath: EEPROM indicates default country code should be used Sun May 19 04:21:03 2019 kern.debug kernel: [ 13.410000] ath: doing EEPROM country->regdmn map search Sun May 19 04:21:03 2019 kern.debug kernel: [ 13.410000] ath: country maps to regdmn code: 0x3a Sun May 19 04:21:03 2019 kern.debug kernel: [ 13.410000] ath: Country alpha2 being used: US Sun May 19 04:21:03 2019 kern.debug kernel: [ 13.410000] ath: Regpair used: 0x3a Sun May 19 04:21:03 2019 kern.debug kernel: [ 13.420000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' Sun May 19 04:21:03 2019 kern.info kernel: [ 13.420000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2 Sun May 19 04:21:03 2019 kern.info kernel: [ 13.440000] usb 1-1.1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested Sun May 19 04:21:03 2019 kern.info kernel: [ 13.450000] usbcore: registered new interface driver ath9k_htc Sun May 19 04:21:03 2019 kern.info kernel: [ 13.580000] RPC: Registered named UNIX socket transport module. Sun May 19 04:21:03 2019 kern.info kernel: [ 13.580000] RPC: Registered udp transport module. Sun May 19 04:21:03 2019 kern.info kernel: [ 13.580000] RPC: Registered tcp transport module. Sun May 19 04:21:03 2019 kern.info kernel: [ 13.590000] RPC: Registered tcp NFSv4.1 backchannel transport module. Sun May 19 04:21:03 2019 kern.info kernel: [ 13.620000] tun: Universal TUN/TAP device driver, 1.6 Sun May 19 04:21:03 2019 kern.info kernel: [ 13.620000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> Sun May 19 04:21:03 2019 kern.info kernel: [ 13.660000] usbcore: registered new interface driver rt2800usb Sun May 19 04:21:03 2019 kern.info kernel: [ 13.680000] usbcore: registered new interface driver rtl8187 Sun May 19 04:21:03 2019 kern.info kernel: [ 13.730000] usbcore: registered new interface driver rtl8192cu Sun May 19 04:21:03 2019 kern.notice kernel: [ 13.790000] sd 0:0:0:0: Attached scsi generic sg0 type 0 Sun May 19 04:21:03 2019 kern.info kernel: [ 13.800000] usbcore: registered new interface driver cdc_acm Sun May 19 04:21:03 2019 kern.info kernel: [ 13.800000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters Sun May 19 04:21:03 2019 kern.info kernel: [ 13.820000] usbcore: registered new interface driver cdc_wdm Sun May 19 04:21:03 2019 kern.info kernel: [ 13.850000] nf_conntrack version 0.5.0 (955 buckets, 3820 max) Sun May 19 04:21:03 2019 kern.info kernel: [ 13.900000] usbcore: registered new interface driver ums-alauda Sun May 19 04:21:03 2019 kern.info kernel: [ 13.910000] usbcore: registered new interface driver ums-cypress Sun May 19 04:21:03 2019 kern.info kernel: [ 13.920000] usbcore: registered new interface driver ums-datafab Sun May 19 04:21:03 2019 kern.info kernel: [ 13.930000] usbcore: registered new interface driver ums-freecom Sun May 19 04:21:03 2019 kern.info kernel: [ 13.940000] usbcore: registered new interface driver ums-isd200 Sun May 19 04:21:03 2019 kern.info kernel: [ 13.950000] usbcore: registered new interface driver ums-jumpshot Sun May 19 04:21:03 2019 kern.info kernel: [ 13.950000] usbcore: registered new interface driver ums-karma Sun May 19 04:21:03 2019 kern.info kernel: [ 13.960000] usbcore: registered new interface driver ums-sddr09 Sun May 19 04:21:03 2019 kern.info kernel: [ 13.980000] usbcore: registered new interface driver ums-sddr55 Sun May 19 04:21:03 2019 kern.info kernel: [ 13.980000] usbcore: registered new interface driver ums-usbat Sun May 19 04:21:03 2019 kern.info kernel: [ 14.010000] usbcore: registered new interface driver usbserial Sun May 19 04:21:03 2019 kern.info kernel: [ 14.010000] usbcore: registered new interface driver usbserial_generic Sun May 19 04:21:03 2019 kern.info kernel: [ 14.020000] usbserial: USB Serial support registered for generic Sun May 19 04:21:03 2019 kern.info kernel: [ 14.080000] xt_time: kernel timezone is -0000 Sun May 19 04:21:03 2019 kern.info kernel: [ 14.080000] usbcore: registered new interface driver asix Sun May 19 04:21:03 2019 kern.info kernel: [ 14.090000] usb 1-1.1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 Sun May 19 04:21:03 2019 kern.info kernel: [ 14.100000] usbcore: registered new interface driver ax88179_178a Sun May 19 04:21:03 2019 kern.info kernel: [ 14.110000] usbcore: registered new interface driver cdc_ether Sun May 19 04:21:03 2019 kern.info kernel: [ 14.120000] ip_tables: (C) 2000-2006 Netfilter Core Team Sun May 19 04:21:03 2019 kern.info kernel: [ 14.140000] usbcore: registered new interface driver pl2303 Sun May 19 04:21:03 2019 kern.info kernel: [ 14.150000] usbserial: USB Serial support registered for pl2303 Sun May 19 04:21:03 2019 kern.info kernel: [ 14.160000] PPP generic driver version 2.4.2 Sun May 19 04:21:03 2019 kern.info kernel: [ 14.170000] NET: Registered protocol family 24 Sun May 19 04:21:03 2019 kern.info kernel: [ 14.170000] usbcore: registered new interface driver qmi_wwan Sun May 19 04:21:03 2019 kern.info kernel: [ 14.180000] usbcore: registered new interface driver rndis_host Sun May 19 04:21:03 2019 kern.info kernel: [ 14.190000] usbcore: registered new interface driver sierra_net Sun May 19 04:21:03 2019 kern.info kernel: [ 14.210000] usbcore: registered new interface driver option Sun May 19 04:21:03 2019 kern.info kernel: [ 14.210000] usbserial: USB Serial support registered for GSM modem (1-port) Sun May 19 04:21:03 2019 kern.info kernel: [ 14.330000] ath9k_htc 1-1.1:1.0: ath9k_htc: HTC initialized with 33 credits Sun May 19 04:21:03 2019 kern.info kernel: [ 14.570000] ath9k_htc 1-1.1:1.0: ath9k_htc: FW Version: 1.4 Sun May 19 04:21:03 2019 kern.info kernel: [ 14.580000] ath9k_htc 1-1.1:1.0: FW RMW support: On Sun May 19 04:21:03 2019 kern.debug kernel: [ 14.580000] ath: EEPROM regdomain: 0x0 Sun May 19 04:21:03 2019 kern.debug kernel: [ 14.580000] ath: EEPROM indicates default country code should be used Sun May 19 04:21:03 2019 kern.debug kernel: [ 14.580000] ath: doing EEPROM country->regdmn map search Sun May 19 04:21:03 2019 kern.debug kernel: [ 14.580000] ath: country maps to regdmn code: 0x3a Sun May 19 04:21:03 2019 kern.debug kernel: [ 14.580000] ath: Country alpha2 being used: US Sun May 19 04:21:03 2019 kern.debug kernel: [ 14.580000] ath: Regpair used: 0x3a Sun May 19 04:21:03 2019 kern.info kernel: [ 14.590000] ieee80211 phy1: Atheros AR9271 Rev:1 Sun May 19 04:21:06 2019 user.emerg syslog: this file has been obseleted. please call "/sbin/block mount" directly Sun May 19 04:21:06 2019 daemon.err block: /dev/mtdblock3 is already mounted Sun May 19 04:21:06 2019 kern.warn kernel: [ 19.590000] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. Sun May 19 04:21:11 2019 daemon.notice netifd: Interface 'lan' is enabled Sun May 19 04:21:11 2019 daemon.notice netifd: Interface 'lan' is setting up now Sun May 19 04:21:11 2019 kern.info kernel: [ 24.100000] device eth0 entered promiscuous mode Sun May 19 04:21:11 2019 daemon.notice netifd: Interface 'lan' is now up Sun May 19 04:21:11 2019 daemon.notice netifd: Interface 'loopback' is enabled Sun May 19 04:21:11 2019 daemon.notice netifd: Interface 'loopback' is setting up now Sun May 19 04:21:11 2019 daemon.notice netifd: Interface 'loopback' is now up Sun May 19 04:21:11 2019 daemon.notice netifd: Network device 'lo' link is up Sun May 19 04:21:11 2019 daemon.notice netifd: Interface 'loopback' has link connectivity Sun May 19 04:21:12 2019 user.notice firewall: Reloading firewall due to ifup of lan (br-lan) Sun May 19 04:21:13 2019 kern.info kernel: [ 26.190000] eth0: link up (100Mbps/Full duplex) Sun May 19 04:21:13 2019 kern.info kernel: [ 26.190000] br-lan: port 1(eth0) entered forwarding state Sun May 19 04:21:13 2019 kern.info kernel: [ 26.200000] br-lan: port 1(eth0) entered forwarding state Sun May 19 04:21:13 2019 daemon.notice netifd: Network device 'eth0' link is up Sun May 19 04:21:13 2019 daemon.notice netifd: Bridge 'br-lan' link is up Sun May 19 04:21:13 2019 daemon.notice netifd: Interface 'lan' has link connectivity Sun May 19 04:21:13 2019 kern.notice kernel: [ 26.870000] random: nonblocking pool is initialized Sun May 19 04:21:13 2019 daemon.notice netifd: radio1 (1371): Interface 0 setup failed: BRIDGE_NOT_ALLOWED Sun May 19 04:21:15 2019 kern.info kernel: [ 28.200000] br-lan: port 1(eth0) entered forwarding state Sun May 19 04:21:16 2019 daemon.notice netifd: radio0 (1370): Configuration file: /var/run/hostapd-phy0.conf Sun May 19 04:21:17 2019 kern.info kernel: [ 30.370000] device wlan0 entered promiscuous mode Sun May 19 04:21:17 2019 kern.info kernel: [ 30.370000] br-lan: port 2(wlan0) entered forwarding state Sun May 19 04:21:17 2019 kern.info kernel: [ 30.380000] br-lan: port 2(wlan0) entered forwarding state Sun May 19 04:21:17 2019 daemon.notice netifd: radio0 (1370): wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE Sun May 19 04:21:17 2019 kern.info kernel: [ 30.440000] br-lan: port 2(wlan0) entered disabled state Sun May 19 04:21:17 2019 daemon.notice netifd: radio0 (1370): Using interface wlan0 with hwaddr 00:c0:ca:a7:6a:23 and ssid "Pineapple_6A23" Sun May 19 04:21:17 2019 kern.info kernel: [ 30.460000] br-lan: port 2(wlan0) entered forwarding state Sun May 19 04:21:17 2019 kern.info kernel: [ 30.470000] br-lan: port 2(wlan0) entered forwarding state Sun May 19 04:21:17 2019 kern.info kernel: [ 30.550000] device wlan0-1 entered promiscuous mode Sun May 19 04:21:17 2019 kern.info kernel: [ 30.550000] br-lan: port 3(wlan0-1) entered forwarding state Sun May 19 04:21:17 2019 kern.info kernel: [ 30.560000] br-lan: port 3(wlan0-1) entered forwarding state Sun May 19 04:21:17 2019 daemon.notice netifd: radio0 (1370): Using interface wlan0-1 with hwaddr 02:c0:ca:a7:6a:23 and ssid "manager" Sun May 19 04:21:18 2019 kern.info kernel: [ 31.490000] br-lan: port 3(wlan0-1) entered disabled state Sun May 19 04:21:19 2019 kern.info kernel: [ 32.470000] br-lan: port 2(wlan0) entered forwarding state Sun May 19 04:21:19 2019 auth.info sshd[1648]: Server listening on 0.0.0.0 port 22. Sun May 19 04:21:19 2019 user.emerg syslog: setting up led WLAN Sun May 19 04:21:20 2019 daemon.info dnsmasq[1697]: started, version 2.78 cachesize 150 Sun May 19 04:21:20 2019 daemon.info dnsmasq[1697]: DNS service limited to local subnets Sun May 19 04:21:20 2019 daemon.info dnsmasq[1697]: compile time options: no-IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify Sun May 19 04:21:20 2019 daemon.info dnsmasq-dhcp[1697]: DHCP, IP range 172.16.42.100 -- 172.16.42.249, lease time 12h Sun May 19 04:21:20 2019 daemon.info dnsmasq[1697]: using local addresses only for domain lan Sun May 19 04:21:20 2019 daemon.info dnsmasq[1697]: reading /tmp/resolv.conf.auto Sun May 19 04:21:20 2019 daemon.info dnsmasq[1697]: using local addresses only for domain lan Sun May 19 04:21:20 2019 daemon.info dnsmasq[1697]: using nameserver 8.8.4.4#53 Sun May 19 04:21:20 2019 daemon.info dnsmasq[1697]: read /etc/hosts - 1 addresses Sun May 19 04:21:20 2019 daemon.info dnsmasq[1697]: read /tmp/hosts/dhcp - 1 addresses Sun May 19 04:21:20 2019 daemon.info dnsmasq-dhcp[1697]: read /etc/ethers - 0 addresses Sun May 19 04:21:20 2019 kern.info kernel: [ 33.620000] br-lan: port 3(wlan0-1) entered forwarding state Sun May 19 04:21:20 2019 kern.info kernel: [ 33.630000] br-lan: port 3(wlan0-1) entered forwarding state Sun May 19 04:21:20 2019 daemon.notice netifd: radio0 (1370): wlan0: interface state COUNTRY_UPDATE->ENABLED Sun May 19 04:21:20 2019 daemon.notice netifd: radio0 (1370): wlan0: AP-ENABLED Sun May 19 04:21:22 2019 kern.info kernel: [ 35.630000] br-lan: port 3(wlan0-1) entered forwarding state Sun May 19 04:21:23 2019 daemon.notice netifd: radio0 (1370): OK Sun May 19 04:21:23 2019 daemon.notice netifd: radio0 (1370): OK Sun May 19 04:21:23 2019 daemon.notice netifd: radio0 (1370): OK Sun May 19 04:21:23 2019 daemon.notice netifd: radio0 (1370): Failed to connect to hostapd - wpa_ctrl_open: No such file or directory Sun May 19 04:21:23 2019 daemon.notice netifd: radio0 (1370): Failed to connect to hostapd - wpa_ctrl_open: No such file or directory Sun May 19 04:21:24 2019 daemon.notice netifd: Network device 'wlan0' link is up Sun May 19 04:21:24 2019 daemon.notice netifd: Network device 'wlan0-1' link is up Sun May 19 04:21:24 2019 user.emerg syslog: [!! 19-05-2019 04:21:24] [INTERFACE] Failed to create capture handle for wlan1mon: wlan1mon: No such device exists (SIOCGIFHWADDR: No such device) Sun May 19 04:21:24 2019 user.notice root: =========== PineAP booted ============== Sun May 19 04:21:24 2019 daemon.info procd: - init complete - Sun May 19 04:21:31 2019 daemon.info dnsmasq-dhcp[1697]: DHCPDISCOVER(br-lan) 172.16.42.223 00:c0:ca:a7:77:cf Sun May 19 04:21:31 2019 daemon.info dnsmasq-dhcp[1697]: DHCPOFFER(br-lan) 172.16.42.223 00:c0:ca:a7:77:cf Sun May 19 04:21:31 2019 daemon.info dnsmasq-dhcp[1697]: DHCPREQUEST(br-lan) 172.16.42.223 00:c0:ca:a7:77:cf Sun May 19 04:21:31 2019 daemon.info dnsmasq-dhcp[1697]: DHCPACK(br-lan) 172.16.42.223 00:c0:ca:a7:77:cf loki
  5. Hey folks, I need some direction. I have had my nano tactical kit for a few days now and I have watched every YouTube video and read every article that I can find about getting started and getting things running smoothly, unfortunately, I cannot for the life of me get it to work on all cylinders. Either I will get it connected to my system but I will not have a connection that goes through my NANO, or I cannot simply Deauth. clients from my testing grounds. Also, the RALINK that was included seems to be about as worthless as tits on a bull. When it is plugged in to my NANO, I do not see a wlan2 option for client mod,. However, if i plug my ALFA usb adapter in, then that will work fine. I would however like to get the RALINK one to work mainly because of its discreet size. Also, do I need to run the wp6.sh script every time I use my NANO? I'm still learning about linux and pentesting in general so any advice or direction is greatly appreciated! If i could please have someone look over my logs and point out anything that looks to be out of place I would certainly appreciate it a ton! I am running Kali Rolling 2019.02 [ 0.000000] Linux version 3.18.84 (@774559a83ad4) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 unknown) ) #42 Thu Apr 25 20:27:12 UTC 2019 [ 0.000000] MyLoader: sysp=8a14b024, boardp=44b65156, parts=b69f8d32 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc) [ 0.000000] SoC: Atheros AR9330 rev 1 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 04000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x03ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x03ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff] [ 0.000000] On node 0 totalpages: 16384 [ 0.000000] free_area_init_node: node 0, pgdat 80365cf0, node_mem_map 81000000 [ 0.000000] Normal zone: 128 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 16384 pages, LIFO batch:3 [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: board=PINEAPPLE-NANO console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 60880K/65536K available (2524K kernel code, 143K rwdata, 540K rodata, 240K init, 188K bss, 4656K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:51 [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) [ 0.080000] pid_max: default: 32768 minimum: 301 [ 0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.100000] NET: Registered protocol family 16 [ 0.100000] MIPS: machine is WiFi Pineapple NANO [ 0.380000] Switched to clocksource MIPS [ 0.380000] NET: Registered protocol family 2 [ 0.390000] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.390000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.400000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.400000] TCP: reno registered [ 0.410000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.410000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.420000] NET: Registered protocol family 1 [ 0.420000] PCI: CLS 0 bytes, default 32 [ 0.420000] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.440000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.440000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.450000] msgmni has been set to 118 [ 0.460000] io scheduler noop registered [ 0.460000] io scheduler deadline registered (default) [ 0.470000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.470000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a AR933X UART [ 0.480000] console [ttyATH0] enabled [ 0.490000] bootconsole [early0] disabled [ 0.500000] m25p80 spi0.0: found mx25l12805d, expected m25p80 [ 0.500000] m25p80 spi0.0: mx25l12805d (16384 Kbytes) [ 0.520000] 5 tp-link partitions found on MTD device spi0.0 [ 0.520000] Creating 5 MTD partitions on "spi0.0": [ 0.520000] 0x000000000000-0x000000020000 : "u-boot" [ 0.530000] 0x000000020000-0x00000013ad28 : "kernel" [ 0.540000] 0x00000013ad28-0x000000ff0000 : "rootfs" [ 0.540000] mtd: device 2 (rootfs) set to be root filesystem [ 0.540000] 1 squashfs-split partitions found on MTD device rootfs [ 0.550000] 0x000000da0000-0x000000ff0000 : "rootfs_data" [ 0.560000] 0x000000ff0000-0x000001000000 : "art" [ 0.560000] 0x000000020000-0x000000ff0000 : "firmware" [ 0.590000] libphy: ag71xx_mdio: probed [ 1.190000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY] [ 1.200000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII [ 1.200000] TCP: cubic registered [ 1.200000] NET: Registered protocol family 17 [ 1.210000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 1.220000] 8021q: 802.1Q VLAN Support v1.8 [ 1.230000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. [ 1.240000] Freeing unused kernel memory: 240K [ 2.780000] init: Console is alive [ 2.780000] init: - watchdog - [ 5.440000] usbcore: registered new interface driver usbfs [ 5.440000] usbcore: registered new interface driver hub [ 5.450000] usbcore: registered new device driver usb [ 5.510000] SCSI subsystem initialized [ 5.520000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.520000] ehci-platform: EHCI generic platform driver [ 5.530000] ehci-platform ehci-platform: EHCI Host Controller [ 5.530000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1 [ 5.540000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000 [ 5.570000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00 [ 5.570000] hub 1-0:1.0: USB hub found [ 5.570000] hub 1-0:1.0: 1 port detected [ 5.580000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.590000] ohci-platform: OHCI generic platform driver [ 5.590000] uhci_hcd: USB Universal Host Controller Interface driver [ 5.610000] usbcore: registered new interface driver usb-storage [ 5.850000] init: - preinit - [ 5.970000] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 6.410000] hub 1-1:1.0: USB hub found [ 6.430000] hub 1-1:1.0: 4 ports detected [ 6.590000] random: procd urandom read with 11 bits of entropy available [ 6.820000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform [ 6.850000] mount_root: loading kmods from internal overlay [ 7.120000] usb 1-1.2: new high-speed USB device number 4 using ehci-platform [ 7.150000] jffs2: notice: (327) jffs2_build_xattr_subsystem: complete building xattr subsystem, 2 of xdatum (0 unchecked, 2 orphan) and 2 of xref (0 dead, 2 orphan) found. [ 7.160000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab [ 7.180000] block: extroot: not configured [ 7.210000] jffs2: notice: (323) jffs2_build_xattr_subsystem: complete building xattr subsystem, 2 of xdatum (0 unchecked, 2 orphan) and 2 of xref (0 dead, 2 orphan) found. [ 7.250000] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 7.270000] scsi host0: usb-storage 1-1.2:1.0 [ 7.350000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab [ 7.360000] block: extroot: not configured [ 7.360000] mount_root: switching to jffs2 overlay [ 7.420000] procd: - early - [ 7.420000] procd: - watchdog - [ 8.330000] procd: - ubus - [ 8.580000] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE 0933 PQ: 0 ANSI: 6 [ 8.670000] sd 0:0:0:0: [sda] 15564800 512-byte logical blocks: (7.96 GB/7.42 GiB) [ 8.690000] sd 0:0:0:0: [sda] Write Protect is off [ 8.690000] sd 0:0:0:0: [sda] Mode Sense: 21 00 00 00 [ 8.690000] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 8.710000] sda: sda1 [ 8.720000] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 9.360000] procd: - init - [ 13.250000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68 [ 13.250000] Backport generated by backports.git backports-20151218-0-g2f58d9d [ 13.410000] ath: EEPROM regdomain: 0x0 [ 13.410000] ath: EEPROM indicates default country code should be used [ 13.410000] ath: doing EEPROM country->regdmn map search [ 13.410000] ath: country maps to regdmn code: 0x3a [ 13.410000] ath: Country alpha2 being used: US [ 13.410000] ath: Regpair used: 0x3a [ 13.420000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 13.420000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2 [ 13.440000] usb 1-1.1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested [ 13.450000] usbcore: registered new interface driver ath9k_htc [ 13.580000] RPC: Registered named UNIX socket transport module. [ 13.580000] RPC: Registered udp transport module. [ 13.580000] RPC: Registered tcp transport module. [ 13.590000] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 13.620000] tun: Universal TUN/TAP device driver, 1.6 [ 13.620000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 13.660000] usbcore: registered new interface driver rt2800usb [ 13.680000] usbcore: registered new interface driver rtl8187 [ 13.730000] usbcore: registered new interface driver rtl8192cu [ 13.790000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 13.800000] usbcore: registered new interface driver cdc_acm [ 13.800000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 13.820000] usbcore: registered new interface driver cdc_wdm [ 13.850000] nf_conntrack version 0.5.0 (955 buckets, 3820 max) [ 13.900000] usbcore: registered new interface driver ums-alauda [ 13.910000] usbcore: registered new interface driver ums-cypress [ 13.920000] usbcore: registered new interface driver ums-datafab [ 13.930000] usbcore: registered new interface driver ums-freecom [ 13.940000] usbcore: registered new interface driver ums-isd200 [ 13.950000] usbcore: registered new interface driver ums-jumpshot [ 13.950000] usbcore: registered new interface driver ums-karma [ 13.960000] usbcore: registered new interface driver ums-sddr09 [ 13.980000] usbcore: registered new interface driver ums-sddr55 [ 13.980000] usbcore: registered new interface driver ums-usbat [ 14.010000] usbcore: registered new interface driver usbserial [ 14.010000] usbcore: registered new interface driver usbserial_generic [ 14.020000] usbserial: USB Serial support registered for generic [ 14.080000] xt_time: kernel timezone is -0000 [ 14.080000] usbcore: registered new interface driver asix [ 14.090000] usb 1-1.1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 [ 14.100000] usbcore: registered new interface driver ax88179_178a [ 14.110000] usbcore: registered new interface driver cdc_ether [ 14.120000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 14.140000] usbcore: registered new interface driver pl2303 [ 14.150000] usbserial: USB Serial support registered for pl2303 [ 14.160000] PPP generic driver version 2.4.2 [ 14.170000] NET: Registered protocol family 24 [ 14.170000] usbcore: registered new interface driver qmi_wwan [ 14.180000] usbcore: registered new interface driver rndis_host [ 14.190000] usbcore: registered new interface driver sierra_net [ 14.210000] usbcore: registered new interface driver option [ 14.210000] usbserial: USB Serial support registered for GSM modem (1-port) [ 14.330000] ath9k_htc 1-1.1:1.0: ath9k_htc: HTC initialized with 33 credits [ 14.570000] ath9k_htc 1-1.1:1.0: ath9k_htc: FW Version: 1.4 [ 14.580000] ath9k_htc 1-1.1:1.0: FW RMW support: On [ 14.580000] ath: EEPROM regdomain: 0x0 [ 14.580000] ath: EEPROM indicates default country code should be used [ 14.580000] ath: doing EEPROM country->regdmn map search [ 14.580000] ath: country maps to regdmn code: 0x3a [ 14.580000] ath: Country alpha2 being used: US [ 14.580000] ath: Regpair used: 0x3a [ 14.590000] ieee80211 phy1: Atheros AR9271 Rev:1 [ 19.590000] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 24.100000] device eth0 entered promiscuous mode [ 26.190000] eth0: link up (100Mbps/Full duplex) [ 26.190000] br-lan: port 1(eth0) entered forwarding state [ 26.200000] br-lan: port 1(eth0) entered forwarding state [ 26.870000] random: nonblocking pool is initialized [ 28.200000] br-lan: port 1(eth0) entered forwarding state [ 30.370000] device wlan0 entered promiscuous mode [ 30.370000] br-lan: port 2(wlan0) entered forwarding state [ 30.380000] br-lan: port 2(wlan0) entered forwarding state [ 30.440000] br-lan: port 2(wlan0) entered disabled state [ 30.460000] br-lan: port 2(wlan0) entered forwarding state [ 30.470000] br-lan: port 2(wlan0) entered forwarding state [ 30.550000] device wlan0-1 entered promiscuous mode [ 30.550000] br-lan: port 3(wlan0-1) entered forwarding state [ 30.560000] br-lan: port 3(wlan0-1) entered forwarding state [ 31.490000] br-lan: port 3(wlan0-1) entered disabled state [ 32.470000] br-lan: port 2(wlan0) entered forwarding state [ 33.620000] br-lan: port 3(wlan0-1) entered forwarding state [ 33.630000] br-lan: port 3(wlan0-1) entered forwarding state [ 35.630000] br-lan: port 3(wlan0-1) entered forwarding state
×
×
  • Create New...