Jump to content

panadero

Active Members
  • Content Count

    9
  • Joined

  • Last visited

Everything posted by panadero

  1. In my current testing, I've had some of the same issues with autossh. The biggest problem I have found, is that once you get the initial connection, the ports stay open on the receiving linux host (not the turtle). So, when turtle tries to create the connection back on 2222, it's already in use, and it dies a horrid death. My fix, is to edit your /etc/ssh/sshd_config options on your receiving host, to alter the keepalives. If not, those ports will stay open for an arbitrary amount of time and drive you to drink...more... Here's my settings: vi /etc/ssh/sshd_config
  2. Remember that you can exit out of the turtle menu to a command prompt. Then cd /etc/turtle/autostart_modules. Cat the 99-autossh module and check out the commands that are running. Copy/paste them into the command line to try them yourself. You'll likely see what the error is and then "Oh dang!", and fix it that way... You can also do a "ps" from the command line, and see the services/commands that are running, that might give you a hint as well. Also check your disk space with "df -h", see how much space rootfs has "Available". If it's critically low, things won't work right.
  3. Here's what we did to fix it, free up disk space on /
  4. Here's the fix, no disk space available on /, so can't write to /root/loot
  5. Here's my fix for it. Most likely an issue with no disk space on / Don't give up hope @aaronbott
  6. Here's my fix. It's most likely a disk space issue on /
  7. After much chagrin and googling, we found that QuickCreds will not work on the lan turtle because of disk space issues. Here's our fix! (we take no responsibility if you break something/somebody. Only hack when you have prior approval and authorization!) Factory reset, or push the turtle-5.bin firmware to reset (probably need to upgrade to v5 anyway). This makes sure you are set to base. YMMV. Open the lan turtle, push and hold the reset button for at least 5 seconds after plugging it into the machine ssh in to 172.16.84.1, sh3llz, change password Update the modules
×
×
  • Create New...