Jump to content


Active Members
  • Content Count

  • Joined

  • Last visited

  • Days Won


Everything posted by JeroenV1982

  1. Good hint on the -B, I didn't know that. Unfortunately Youtube Editor has no way to make a comment on that afterwards. About the berserk, you are right, I thought I'd copied my original line with the -S and realized it didn't when I seen it all going bad. I will update the video once more with your suggestions in it, thanks for your support!
  2. I made a simple video for those interested. EDIT: I will update this video a.s.a.p.
  3. I used this guide to change my output power. It works perfect but after a power loss the MK7 boots at default values. Anyone know how to overcome this problem? Console output after power loss: root@mk7:/pineapple# iw dev phy#2 Interface wlan2 ifindex 7 wdev 0x200000002 addr 0c:ef:af:ce:6e:03 type managed txpower 20.00 dBm phy#1 Interface wlan1 ifindex 8 wdev 0x100000002 addr 0c:ef:af:ce:7e:08
  4. My Alfa AWUS036ACS does show up under USB devices (Realtek Semiconducttor Corp) as Device 007. I know this is Realtek RTL8811AU but did anyone managed to make it work? root@mk7:/pineapple# lsusb Bus 001 Device 004: ID 148f:7601 Ralink Technology, Corp. MT7601U Wireless Adapter Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 148f:7601 Ralink Technology, Corp. MT7601U Wireless Adapter Bus 001 Device 007: ID 0bda:0811 Realtek Semiconductor Corp. Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub Bus 001 Device 001: ID
  5. Thank you for your help. I updated my MDK4 on my MKVIII successful. I also tried mdk4 wlan1mon wlan1mon d -S 00:00:00:00:00:00 (Mac of my AP) and it works perfect. From a noob point of view, can you explain the difference between -B (BSSID) and -S (Station)? Aren't both the same since they both are MAC?
  6. There is also the -S (see picture above). Do you know the difference between -B and -S? I tried: mdk4 wlan1mon wlan1mon d -E SenS But it also throws away my iPhone connected to the Open Wifi of the MK7 and that SSID is "Amadore Guest" (not SenS with MAC 98:9B:CB:F0:39:0B)? (I can see this because my PineAP is in advanced mode (for monitor mode) and has Client Connected and Disconnected notifications enabled. Photo
  7. I’m running MDK4.0 v1. MDK4 —help d says -e is valid for mode “d”.
  8. Very well explained thank you! my Blacklist.txt only contains one Mac but the console output is very weird. Using bssid filtering (-e) the result looks better. Is this a bug?
  9. I’m also curious how to work with the webend of mdk4 on the pineapple. Any links to videos? running MDK4 from the console works fine but the keyboard on a iPad lacks CTRL-X, arrow keys and more so sucks a bit. Does anybody know how to add multiple MAC addresses in the whitelist? Are these comma separated?
  10. FYI: I made this portal yesterday evening and this morning had 5 entries in my log and about 50 unique visitors. I guess most people came in the hotel at the beginning of the week and they never seen this portal so they disconnected or picked another SSID. My guess is that when I place my Mark7 next week Monday and run all week I have more luck. just to let you guys know, I delete all entires, this is just for learning purposes.
  11. I made a video: https://forums.hak5.org/topic/54548-custom-evil-portal-instruction-video-from-noob-for-noobs/
  12. Same question here for channel 12/13 in The Netherlands
  13. I was looking on the internet on how to use a custom Captive Portal and could not find any videos. I found a way to make people leave their credentials and you'd just might like it. -Cheers- Part1: Part2: Enjoy and share your work!
  14. Same issue here. The MK7 does not like to connect to open WiFi with any kind of CP behind it.
  15. Hey guys, I own the MK7 and might have a dumb question; is there a way to make the open WiFi a password protected one that accepts any given password? The thing is to trick my clients, they always have to go into WiFi settings and select my open WiFi which has no keylock icon next to it. Most users won’t fall for this trick.
  16. Hi all, I want to trick / pentest a corporate Access Point that has Microsoft OneX security. So these require you to login with your Microsoft 365 username and PW and are unique for every user. Since all members had access before, I need a way to trick their laptops to pick my WP by providing better wifi signal (which I can). Did anybody found a way to enable security on WP and accept any password given? In the end, the only thing matters is that the user will try to connect entering a Microsoft email and password. We don't care if the credentials are right or not and I intent to never ev
  17. I/m also having a red blinking LED. Tried both default interface="lo" and "br-lan" with no success. My FW is 3.2 and my USB is NTFS formatted. I will put an issue on his GITHUB.
  18. Hi all, my name is Jeroen and I'm new. I have the Packet Squirrel and I want to redirect a specific website to a clone to harvest user/pwd. Did someone ever tried this and his willing to share his/her work? Br Jeroen P.S. the purpose is demonstrate the risks of an attack like this and if I can do it (with the community help), anyone can.
  19. Yes I did but thanks for pointing out. I also posted my issue on the Oracle forums. People say its not possible to share a USB between the host and the VM. The send me a link but I already created a filter. The filer is what is causing the issue. When I remove the filer my wifi adpater keeps working (blue led on), the moment I go to the top and select USB, Realink, the LED goes off again. As far as my english goes, these are the two steps (approaches) from the link right?
  20. Ok another clean install, this time full kali linux 2018.4 64-bit. The script worked, but my adapter still isn't. Here is the result: root@kali:~/Desktop# bash ./wlan.sh Hit:1 http://ftp2.nluug.nl/os/Linux/distr/kali kali-rolling InRelease Reading package lists... Done Reading package lists... Done Building dependency tree Reading state information... Done dkms is already the newest version (2.6.1-1). The following packages were automatically installed and are no longer required: libbind9-160 libdns1102 libirs160 libisc169 libisccc160 libisccfg160 liblwres160 libpoppler74 l
  21. Ok I dis a clean install, followed this video and now my AWUS036ACH is working (blue led on). Unfortunately my Airgeddon isnt working so I opened an issue at the Github repo for this. I do have another strange issue when I do: root@kali:~# airmon-ng PHY Interface Driver Chipset phy0 wlan0 8812au Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac WLAN Adapter root@kali:~# airmon-ng start wlan0 PHY Interface Driver Chipset phy0 wlan0 8812au Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac WLAN Adapter (mac80211 monitor mode already enabled for [phy0]wlan0 o
  • Create New...