Jump to content

JediMasterX

Active Members
  • Posts

    42
  • Joined

  • Last visited

Posts posted by JediMasterX

  1. On 7/25/2020 at 8:28 PM, Struthian said:

    "Dead meat" is not a very diagnostic description.  What have you done to it? How did you attempt a reset?  Don't tell people to wake up if you can't really articulate what is going on.  Look at the reset process.  Follow it.  Make sure it is powered properly according to the documentation. Start following the process exactly.  Attempt to access it (and explain what happened), then if that doesn't work, follow the reset process.  Never expect people to care what you write when you didn't write anything descriptive yourself. That is important to any community.  

    No, its not diagnostic its a feeling.

    Besides mitm with a portal, its not that useful to me. But i dont blame anyone, just a FEELING that the product is no longer powerful as it used to or an equivalnte of wardriving.

    Btw, i have the nano.

    JMX

  2. So - from what i get none of the tools are updated and so are the payloads... only if you can create one to work by yourself and workaround things...

    the BB is off the site aswell...

    JMX

  3. 9 hours ago, Just_a_User said:

    Not saying thats the issue, its just a good place to start checking.

    From your logs it looks as though the dongle isnt recognized by the pineapple as it hasn't populated wlan2 in ifconfig or dmesg. So either its not powering up (check on another machine) or its driver isnt present on the pineapples? from the wiki -  

    " Compatible chipsets include RaLink RT2800 devices, as well as some Atheros and RealTek devices. Wireless adapters from HakShop.com are certified to work with the WiFi Pineapple"

    My RT chipset 5390 and RT chipset 3070 are working well on NANO/TETRA - both seem to use the driver for rt2870.

     

    ok - now live testing':

    Bus 001 Device 006: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
    Bus 001 Device 005: ID 05e3:0745 Genesys Logic, Inc.
    Bus 001 Device 003: ID 0cf3:9271 Atheros Communications, Inc. AR9271 802.11n
    Bus 001 Device 002: ID 058f:6254 Alcor Micro Corp. USB Hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

    1-thats after rest, and the wlan2 is now connected.

    2-rying reset ( no moduls installed and anything)

    • still here and working

    3 installing -

    • updated pineap and notes.
    • ConnectedClients 1.4 Connected Clients is an infusion for the Wifi Pineapple that gives information about connected clients 32.0K r3dfish GUI  
      DNSMasq Spoof 1.0 Forge replies to arbitrary DNS queries using DNSMasq 25.5K Whistle Master GUI  
      DNSspoof 1.3 Forge replies to arbitrary DNS queries using DNSspoof 31.5K Whistle Master GUI  
      Deauth 1.5 Deauthentication attacks of all devices connected to APs nearby 72.0K Whistle Master GUI  
      Evil Portal 2.1 An Evil Captive Portal. 141.0K newbi3 GUI  
      Log Manager 1.2 Manage all modules logs 32.0K Whistle Master GUI  
      Online Hash Crack 1.3 Submit Hash and WPA Handshake to www.onlinehashcrack.com web service 56.0K Whistle Master GUI  
      Themes 1.0 Create, download, and share custom themes. 312.0K trashbo4t GUI  
      nmap 1.6 GUI for security scanner nmap 33.0K Whistle Master GUI  
    • reset device - still here
    • installing dependencis on sd.
    • resetting
    • still working
    • pushed via cli evil portals
    • set dnspoof and evilportal to run on startup (dnsspoof is set to br-lan)
    • reset
    • aaand... no wlan2. WTF.
    • disable auto start at boot for both
    • reset
    • its BACK AGAIN..
    • DNSMaskSpoof is auto + Evilportal auto on boot.
    • reset
    • Both working and With CLINT MODE wlan2 is still active...
    • initiating PineAP wlan1
    • all WORKING.

    now, please share with me (noob) what and why this is? whats the diffrence between the two? both seems to work same same and DNSspoof is the issue...

    again, i changed it to br--lan interface

     

    JMX

    •  
  4. 37 minutes ago, Just_a_User said:

    Not saying thats the issue, its just a good place to start checking.

    From your logs it looks as though the dongle isnt recognized by the pineapple as it hasn't populated wlan2 in ifconfig or dmesg. So either its not powering up (check on another machine) or its driver isnt present on the pineapples? from the wiki -  

    " Compatible chipsets include RaLink RT2800 devices, as well as some Atheros and RealTek devices. Wireless adapters from HakShop.com are certified to work with the WiFi Pineapple"

    My RT chipset 5390 and RT chipset 3070 are working well on NANO/TETRA - both seem to use the driver for rt2870.

     

    Hi man, thanks for the replay.

    Both plugs work on my laptop when i plug them in. It seems like the drivers..? How do i reinstall them? Thanks a bunch.

    JMX

     

  5. ok, after 2 tries:

    1.i thought my rl 5070 wireless adpater is dead, so i just switched to the second one i had.

    nope, Still the client mode isnt working.

    did a factory reset..

    thenn a full blown firmware rest...

    the point is, its working for the first time i fire up the device, i setup everything and when i tried to connect to a newtwork it just froze, and doesnt work since.

     

    plugged to 2 usb ports aswell.

     

    • br-lan    Link encap:Ethernet  HWaddr 00:C0:CA:8F:9A:AE
                inet addr:172.16.42.1  Bcast:172.16.42.255  Mask:255.255.255.0
                UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
                RX packets:38464 errors:0 dropped:0 overruns:0 frame:0
                TX packets:32059 errors:0 dropped:0 overruns:0 carrier:0
                collisions:0 txqueuelen:0
                RX bytes:9897922 (9.4 MiB)  TX bytes:30964976 (29.5 MiB)
      
      eth0      Link encap:Ethernet  HWaddr 00:C0:CA:8F:9A:AE
                UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
                RX packets:33461 errors:0 dropped:0 overruns:0 frame:0
                TX packets:31580 errors:0 dropped:0 overruns:0 carrier:0
                collisions:0 txqueuelen:1000
                RX bytes:9694506 (9.2 MiB)  TX bytes:30682155 (29.2 MiB)
                Interrupt:4
      
      lo        Link encap:Local Loopback
                inet addr:127.0.0.1  Mask:255.0.0.0
                UP LOOPBACK RUNNING  MTU:65536  Metric:1
                RX packets:111 errors:0 dropped:0 overruns:0 frame:0
                TX packets:111 errors:0 dropped:0 overruns:0 carrier:0
                collisions:0 txqueuelen:0
                RX bytes:8332 (8.1 KiB)  TX bytes:8332 (8.1 KiB)
      
      wlan0     Link encap:Ethernet  HWaddr 00:C0:CA:8F:69:31
                UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
                RX packets:0 errors:0 dropped:0 overruns:0 frame:0
                TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
                collisions:0 txqueuelen:1000
                RX bytes:0 (0.0 B)  TX bytes:2002 (1.9 KiB)
      
      wlan1     Link encap:Ethernet  HWaddr 00:C0:CA:8F:84:8C
                UP BROADCAST MULTICAST  MTU:1500  Metric:1
                RX packets:0 errors:0 dropped:0 overruns:0 frame:0
                TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
                collisions:0 txqueuelen:1000
                RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

     

    • [    0.000000] Linux version 3.18.84 (@f818d65006a1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 unknown) ) #91 Fri May 25 03:59:51 UTC 2018
      [    0.000000] MyLoader: sysp=8a14b024, boardp=44b65156, parts=b69f8d32
      [    0.000000] bootconsole [early0] enabled
      [    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
      [    0.000000] SoC: Atheros AR9330 rev 1
      [    0.000000] Determined physical RAM map:
      [    0.000000]  memory: 04000000 @ 00000000 (usable)
      [    0.000000] Initrd not found or empty - disabling initrd
      [    0.000000] Zone ranges:
      [    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
      [    0.000000] Movable zone start for each node
      [    0.000000] Early memory node ranges
      [    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
      [    0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff]
      [    0.000000] On node 0 totalpages: 16384
      [    0.000000] free_area_init_node: node 0, pgdat 80365cf0, node_mem_map 81000000
      [    0.000000]   Normal zone: 128 pages used for memmap
      [    0.000000]   Normal zone: 0 pages reserved
      [    0.000000]   Normal zone: 16384 pages, LIFO batch:3
      [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
      [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
      [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
      [    0.000000] pcpu-alloc: [0] 0
      [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
      [    0.000000] Kernel command line:  board=PINEAPPLE-NANO  console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
      [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
      [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
      [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
      [    0.000000] Writing ErrCtl register=00000000
      [    0.000000] Readback ErrCtl register=00000000
      [    0.000000] Memory: 60880K/65536K available (2524K kernel code, 143K rwdata, 540K rodata, 240K init, 188K bss, 4656K reserved, 0K cma-reserved)
      [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
      [    0.000000] NR_IRQS:51
      [    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
      [    0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
      [    0.080000] pid_max: default: 32768 minimum: 301
      [    0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
      [    0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
      [    0.100000] NET: Registered protocol family 16
      [    0.100000] MIPS: machine is WiFi Pineapple NANO
      [    0.380000] Switched to clocksource MIPS
      [    0.380000] NET: Registered protocol family 2
      [    0.390000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
      [    0.390000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
      [    0.400000] TCP: Hash tables configured (established 1024 bind 1024)
      [    0.400000] TCP: reno registered
      [    0.410000] UDP hash table entries: 256 (order: 0, 4096 bytes)
      [    0.410000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
      [    0.420000] NET: Registered protocol family 1
      [    0.420000] PCI: CLS 0 bytes, default 32
      [    0.420000] futex hash table entries: 256 (order: -1, 3072 bytes)
      [    0.440000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
      [    0.440000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
      [    0.450000] msgmni has been set to 118
      [    0.460000] io scheduler noop registered
      [    0.460000] io scheduler deadline registered (default)
      [    0.470000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
      [    0.470000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a AR933X UART
      [    0.480000] console [ttyATH0] enabled
      [    0.490000] bootconsole [early0] disabled
      [    0.500000] m25p80 spi0.0: found mx25l12805d, expected m25p80
      [    0.500000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
      [    0.520000] 5 tp-link partitions found on MTD device spi0.0
      [    0.520000] Creating 5 MTD partitions on "spi0.0":
      [    0.520000] 0x000000000000-0x000000020000 : "u-boot"
      [    0.530000] 0x000000020000-0x00000013af6c : "kernel"
      [    0.540000] 0x00000013af6c-0x000000ff0000 : "rootfs"
      [    0.540000] mtd: device 2 (rootfs) set to be root filesystem
      [    0.540000] 1 squashfs-split partitions found on MTD device rootfs
      [    0.550000] 0x000000d80000-0x000000ff0000 : "rootfs_data"
      [    0.560000] 0x000000ff0000-0x000001000000 : "art"
      [    0.560000] 0x000000020000-0x000000ff0000 : "firmware"
      [    0.590000] libphy: ag71xx_mdio: probed
      [    1.190000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
      [    1.200000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
      [    1.200000] TCP: cubic registered
      [    1.200000] NET: Registered protocol family 17
      [    1.210000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
      [    1.220000] 8021q: 802.1Q VLAN Support v1.8
      [    1.230000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
      [    1.240000] Freeing unused kernel memory: 240K
      [    2.820000] init: Console is alive
      [    2.820000] init: - watchdog -
      [    5.520000] usbcore: registered new interface driver usbfs
      [    5.520000] usbcore: registered new interface driver hub
      [    5.530000] usbcore: registered new device driver usb
      [    5.580000] SCSI subsystem initialized
      [    5.590000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
      [    5.600000] ehci-platform: EHCI generic platform driver
      [    5.600000] ehci-platform ehci-platform: EHCI Host Controller
      [    5.610000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
      [    5.620000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
      [    5.640000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
      [    5.640000] hub 1-0:1.0: USB hub found
      [    5.640000] hub 1-0:1.0: 1 port detected
      [    5.650000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
      [    5.660000] ohci-platform: OHCI generic platform driver
      [    5.670000] uhci_hcd: USB Universal Host Controller Interface driver
      [    5.680000] usbcore: registered new interface driver usb-storage
      [    5.920000] init: - preinit -
      [    6.030000] usb 1-1: new high-speed USB device number 2 using ehci-platform
      [    6.520000] hub 1-1:1.0: USB hub found
      [    6.520000] hub 1-1:1.0: 4 ports detected
      [    6.700000] random: procd urandom read with 11 bits of entropy available
      [    6.960000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
      [    6.980000] mount_root: loading kmods from internal overlay
      [    7.280000] usb 1-1.2: new high-speed USB device number 4 using ehci-platform
      [    7.310000] jffs2: notice: (327) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 2 of xref (0 dead, 0 orphan) found.
      [    7.320000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
      [    7.340000] block: extroot: not configured
      [    7.380000] jffs2: notice: (324) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 2 of xref (0 dead, 0 orphan) found.
      [    7.410000] usb-storage 1-1.2:1.0: USB Mass Storage device detected
      [    7.420000] scsi host0: usb-storage 1-1.2:1.0
      [    7.520000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
      [    7.530000] block: extroot: not configured
      [    7.540000] mount_root: switching to jffs2 overlay
      [    7.600000] procd: - early -
      [    7.600000] procd: - watchdog -
      [    8.420000] scsi 0:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0933 PQ: 0 ANSI: 6
      [    8.580000] procd: - ubus -
      [    8.950000] sd 0:0:0:0: [sda] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB)
      [    8.950000] sd 0:0:0:0: [sda] Write Protect is off
      [    8.960000] sd 0:0:0:0: [sda] Mode Sense: 21 00 00 00
      [    8.970000] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
      [    8.980000]  sda: sda1 sda2
      [    9.000000] sd 0:0:0:0: [sda] Attached SCSI removable disk
      [    9.600000] procd: - init -
      [   12.110000] EXT4-fs (sda1): recovery complete
      [   12.130000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
      [   12.460000] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
      [   12.520000] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
      [   12.570000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
      [   13.000000] Adding 1004024k swap on /dev/sdcard/sd2.  Priority:-1 extents:1 across:1004024k
      [   14.110000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
      [   14.110000] Backport generated by backports.git backports-20151218-0-g2f58d9d
      [   14.270000] ath: EEPROM regdomain: 0x0
      [   14.270000] ath: EEPROM indicates default country code should be used
      [   14.270000] ath: doing EEPROM country->regdmn map search
      [   14.270000] ath: country maps to regdmn code: 0x3a
      [   14.270000] ath: Country alpha2 being used: US
      [   14.270000] ath: Regpair used: 0x3a
      [   14.280000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
      [   14.280000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
      [   14.310000] usb 1-1.1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
      [   14.320000] usbcore: registered new interface driver ath9k_htc
      [   14.450000] RPC: Registered named UNIX socket transport module.
      [   14.450000] RPC: Registered udp transport module.
      [   14.450000] RPC: Registered tcp transport module.
      [   14.460000] RPC: Registered tcp NFSv4.1 backchannel transport module.
      [   14.490000] tun: Universal TUN/TAP device driver, 1.6
      [   14.490000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
      [   14.540000] usbcore: registered new interface driver rt2800usb
      [   14.560000] usbcore: registered new interface driver rtl8187
      [   14.620000] usbcore: registered new interface driver rtl8192cu
      [   14.670000] sd 0:0:0:0: Attached scsi generic sg0 type 0
      [   14.690000] usbcore: registered new interface driver cdc_acm
      [   14.700000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
      [   14.710000] usbcore: registered new interface driver cdc_wdm
      [   14.740000] nf_conntrack version 0.5.0 (955 buckets, 3820 max)
      [   14.810000] usbcore: registered new interface driver ums-alauda
      [   14.820000] usbcore: registered new interface driver ums-cypress
      [   14.830000] usbcore: registered new interface driver ums-datafab
      [   14.840000] usbcore: registered new interface driver ums-freecom
      [   14.850000] usbcore: registered new interface driver ums-isd200
      [   14.850000] usbcore: registered new interface driver ums-jumpshot
      [   14.860000] usbcore: registered new interface driver ums-karma
      [   14.870000] usbcore: registered new interface driver ums-sddr09
      [   14.880000] usbcore: registered new interface driver ums-sddr55
      [   14.890000] usbcore: registered new interface driver ums-usbat
      [   14.910000] usbcore: registered new interface driver usbserial
      [   14.910000] usbcore: registered new interface driver usbserial_generic
      [   14.920000] usbserial: USB Serial support registered for generic
      [   14.980000] xt_time: kernel timezone is -0000
      [   14.980000] usbcore: registered new interface driver asix
      [   14.990000] usb 1-1.1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
      [   15.000000] usbcore: registered new interface driver ax88179_178a
      [   15.010000] usbcore: registered new interface driver cdc_ether
      [   15.020000] ip_tables: (C) 2000-2006 Netfilter Core Team
      [   15.050000] usbcore: registered new interface driver pl2303
      [   15.050000] usbserial: USB Serial support registered for pl2303
      [   15.060000] PPP generic driver version 2.4.2
      [   15.070000] NET: Registered protocol family 24
      [   15.080000] usbcore: registered new interface driver qmi_wwan
      [   15.090000] usbcore: registered new interface driver rndis_host
      [   15.100000] usbcore: registered new interface driver sierra_net
      [   15.110000] usbcore: registered new interface driver option
      [   15.110000] usbserial: USB Serial support registered for GSM modem (1-port)
      [   15.230000] ath9k_htc 1-1.1:1.0: ath9k_htc: HTC initialized with 33 credits
      [   15.480000] ath9k_htc 1-1.1:1.0: ath9k_htc: FW Version: 1.4
      [   15.480000] ath9k_htc 1-1.1:1.0: FW RMW support: On
      [   15.480000] ath: EEPROM regdomain: 0x0
      [   15.480000] ath: EEPROM indicates default country code should be used
      [   15.480000] ath: doing EEPROM country->regdmn map search
      [   15.480000] ath: country maps to regdmn code: 0x3a
      [   15.480000] ath: Country alpha2 being used: US
      [   15.480000] ath: Regpair used: 0x3a
      [   15.490000] ieee80211 phy1: Atheros AR9271 Rev:1
      [   16.620000] random: nonblocking pool is initialized
      [   26.050000] device eth0 entered promiscuous mode
      [   28.360000] eth0: link up (100Mbps/Full duplex)
      [   28.360000] br-lan: port 1(eth0) entered forwarding state
      [   28.370000] br-lan: port 1(eth0) entered forwarding state
      [   30.370000] br-lan: port 1(eth0) entered forwarding state
      [   31.580000] device wlan0 entered promiscuous mode
      [   31.630000] br-lan: port 2(wlan0) entered forwarding state
      [   31.640000] br-lan: port 2(wlan0) entered forwarding state
      [   31.690000] device wlan0-1 entered promiscuous mode
      [   31.700000] br-lan: port 3(wlan0-1) entered forwarding state
      [   31.700000] br-lan: port 3(wlan0-1) entered forwarding state
      [   32.720000] br-lan: port 3(wlan0-1) entered disabled state
      [   33.630000] br-lan: port 3(wlan0-1) entered forwarding state
      [   33.640000] br-lan: port 3(wlan0-1) entered forwarding state
      [   33.640000] br-lan: port 2(wlan0) entered forwarding state
      [   35.640000] br-lan: port 3(wlan0-1) entered forwarding state
      [   41.550000] device br-lan entered promiscuous mode
      [ 1637.320000] br-lan: port 3(wlan0-1) entered disabled state
      [ 1637.330000] device wlan0-1 left promiscuous mode
      [ 1637.330000] br-lan: port 3(wlan0-1) entered disabled state
      [ 1637.580000] device wlan0 left promiscuous mode
      [ 1637.590000] br-lan: port 2(wlan0) entered disabled state
      [ 1640.710000] device wlan0 entered promiscuous mode
      [ 1640.760000] br-lan: port 2(wlan0) entered forwarding state
      [ 1640.760000] br-lan: port 2(wlan0) entered forwarding state
      [ 1640.850000] device wlan0-1 entered promiscuous mode
      [ 1640.860000] br-lan: port 3(wlan0-1) entered forwarding state
      [ 1640.870000] br-lan: port 3(wlan0-1) entered forwarding state
      [ 1641.680000] br-lan: port 3(wlan0-1) entered disabled state
      [ 1642.760000] br-lan: port 2(wlan0) entered forwarding state
      [ 1643.160000] br-lan: port 3(wlan0-1) entered forwarding state
      [ 1643.160000] br-lan: port 3(wlan0-1) entered forwarding state
      [ 1645.160000] br-lan: port 3(wlan0-1) entered forwarding state
      [ 1647.540000] br-lan: port 3(wlan0-1) entered disabled state
      [ 1649.160000] device wlan0-1 left promiscuous mode
      [ 1649.170000] br-lan: port 3(wlan0-1) entered disabled state
      [ 1649.470000] device wlan0 left promiscuous mode
      [ 1649.470000] br-lan: port 2(wlan0) entered disabled state
      [ 1656.500000] device wlan0 entered promiscuous mode
      [ 1656.800000] br-lan: port 2(wlan0) entered forwarding state
      [ 1656.810000] br-lan: port 2(wlan0) entered forwarding state
      [ 1657.030000] device wlan0-1 entered promiscuous mode
      [ 1657.090000] br-lan: port 3(wlan0-1) entered forwarding state
      [ 1657.090000] br-lan: port 3(wlan0-1) entered forwarding state
      [ 1657.180000] br-lan: port 3(wlan0-1) entered disabled state
      [ 1658.810000] br-lan: port 2(wlan0) entered forwarding state
      [ 1662.590000] br-lan: port 2(wlan0) entered disabled state
      [ 1662.690000] device wlan0 left promiscuous mode
      [ 1662.690000] br-lan: port 2(wlan0) entered disabled state
      [ 1662.750000] br-lan: port 3(wlan0-1) entered disabled state
      [ 1662.880000] device wlan0-1 left promiscuous mode
      [ 1662.880000] br-lan: port 3(wlan0-1) entered disabled state
      [ 1663.950000] eth0: link down
      [ 1664.220000] br-lan: port 1(eth0) entered disabled state
      [ 1664.950000] eth0: link up (100Mbps/Full duplex)
      [ 1664.950000] br-lan: port 1(eth0) entered forwarding state
      [ 1664.960000] br-lan: port 1(eth0) entered forwarding state
      [ 1666.960000] br-lan: port 1(eth0) entered forwarding state
      [ 3175.200000] device wlan0 entered promiscuous mode
      [ 3175.200000] br-lan: port 2(wlan0) entered forwarding state
      [ 3175.210000] br-lan: port 2(wlan0) entered forwarding state
      [ 3177.210000] br-lan: port 2(wlan0) entered forwarding state
      [ 3326.020000] device wlan0 left promiscuous mode
      [ 3326.030000] br-lan: port 2(wlan0) entered disabled state
      [ 3327.020000] eth0: link down
      [ 3327.040000] br-lan: port 1(eth0) entered disabled state
      [ 3327.670000] device wlan0 entered promiscuous mode
      [ 3327.670000] br-lan: port 2(wlan0) entered forwarding state
      [ 3327.680000] br-lan: port 2(wlan0) entered forwarding state
      [ 3328.020000] eth0: link up (100Mbps/Full duplex)
      [ 3328.020000] br-lan: port 1(eth0) entered forwarding state
      [ 3328.030000] br-lan: port 1(eth0) entered forwarding state
      [ 3329.680000] br-lan: port 2(wlan0) entered forwarding state
      [ 3330.030000] br-lan: port 1(eth0) entered forwarding state
      [ 3342.020000] device wlan0 left promiscuous mode
      [ 3342.030000] br-lan: port 2(wlan0) entered disabled state
      [ 3343.910000] device wlan0 entered promiscuous mode
      [ 3343.910000] br-lan: port 2(wlan0) entered forwarding state
      [ 3343.920000] br-lan: port 2(wlan0) entered forwarding state
      [ 3344.020000] eth0: link down
      [ 3344.670000] br-lan: port 1(eth0) entered disabled state
      [ 3345.920000] br-lan: port 2(wlan0) entered forwarding state
      [ 3346.020000] eth0: link up (100Mbps/Full duplex)
      [ 3346.020000] br-lan: port 1(eth0) entered forwarding state
      [ 3346.030000] br-lan: port 1(eth0) entered forwarding state
      [ 3348.030000] br-lan: port 1(eth0) entered forwarding state
      [ 3356.460000] device wlan0 left promiscuous mode
      [ 3356.460000] br-lan: port 2(wlan0) entered disabled state
      [ 3357.270000] device wlan0 entered promiscuous mode
      [ 3357.270000] br-lan: port 2(wlan0) entered forwarding state
      [ 3357.280000] br-lan: port 2(wlan0) entered forwarding state
      [ 3358.020000] eth0: link down
      [ 3358.020000] br-lan: port 1(eth0) entered disabled state
      [ 3359.020000] eth0: link up (100Mbps/Full duplex)
      [ 3359.020000] br-lan: port 1(eth0) entered forwarding state
      [ 3359.030000] br-lan: port 1(eth0) entered forwarding state
      [ 3359.280000] br-lan: port 2(wlan0) entered forwarding state
      [ 3361.030000] br-lan: port 1(eth0) entered forwarding state

    help me fix it Sebb :)

     

    thanks for the hard work btw,

     

    JMX

  6. On 4/2/2018 at 1:16 AM, Ar1k88 said:

    I'm personally rewriting this script, going to try and make it accessible for Android 6+ (Marshmallow). So far I have the script rewrote, just having issues with IP's.. 

    I'll keep everyone posted within the week on whats going on. 

    (Side Note - I just got Zelda: Breath of the Wild, so forgive the absence.. Everyone needs a break from every now and then.)

     

    -Ar1k88

    well... ? still waiting

     

    JMX

  7. 4 hours ago, s_o_r_c_e_r_e_r said:

    My problem was that any "Q STRING" line ending with ".txt" will fail, that's why there is nothing showing up in the loot folder if you are trying to
    put a file with the ".txt" extension there.

    The workaround for me was:

    Q STRING file.tx
    Q STRING t
    Q ENTER

    I thought that with .txt files u should put qutes? 

    Q STRING "file.txt"

    Ahh need to try it now

    JMX

  8. 3 hours ago, Exmix said:

    Already ordered mine and apparently I just the email that it shipped. Awesome.

    Looking forward to tomorrow to see the new items. Going to watch the live event.

    Damn, so as mine (still need to go throu that fishy middle companey to send it overseas)

    When will you guys start shipping directly to Israel?

    JMX

×
×
  • Create New...