Jump to content


Active Members
  • Posts

  • Joined

  • Last visited

Everything posted by vay3t

  1. Wifi pineapple tetra with fw v2.7 crash when run openvpn with config type client-to-site, i dont have idea how to capture the dmesg. Config Server port 443 proto tcp dev tun user nobody group nogroup persist-key persist-tun keepalive 10 120 topology subnet server ifconfig-pool-persist ipp.txt #push "dhcp-option DNS" #push "dhcp-option DNS" #push "redirect-gateway def1 bypass-dhcp" dh none ecdh-curve prime256v1 tls-crypt tls-crypt.key 0 crl-verify crl.pem ca ca.crt cert server_A.crt key server_A.key auth SHA256 cipher AES-128-GCM ncp-ciphers AES-128-GCM tls-server tls-version-min 1.2 tls-cipher TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256 client-config-dir /etc/openvpn/ccd status /var/log/openvpn/status.log verb 3 Config Client: client proto tcp-client remote x.x.x.x 443 dev tun resolv-retry infinite nobind persist-key persist-tun remote-cert-tls server verify-x509-name server_A name auth SHA256 auth-nocache cipher AES-128-GCM tls-client tls-version-min 1.2 tls-cipher TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256 ignore-unknown-option block-outside-dns setenv opt block-outside-dns # Prevent Windows 10 DNS leak verb 3 <ca> -----BEGIN CERTIFICATE----- AAAAAAA -----END CERTIFICATE----- </ca> <cert> -----BEGIN CERTIFICATE----- AAAAAAA -----END CERTIFICATE----- </cert> <key> -----BEGIN PRIVATE KEY----- AAAAAAA -----END PRIVATE KEY----- </key> <tls-crypt> # # 2048 bit OpenVPN static key # -----BEGIN OpenVPN Static key V1----- AAAAAAA -----END OpenVPN Static key V1----- </tls-crypt>
  2. How to create a open AP dual band? I recently bought the tetra for having dual band, but when I saw the configuration I realized that it is only possible to create a single band AP, and i need use 2.4GHz and 5GHz simultaneously. i use v2.7
  3. dmesg of bash bunny, i updated to 1.6 and i have same problem 😕 [ 9.433432] usb open backing file: /dev/nandf, 0xd3c50800 [ 9.433693] g_ether gadget: Mass Storage Function, version: 2009/09/11 [ 9.433718] g_ether gadget: Number of LUNs=1 [ 9.433749] lun0: LUN: removable file: /dev/nandf [ 9.433805] gadget_is_softwinner_otg is not -int [ 9.433824] gadget_is_softwinner_otg is not -int [ 9.433862] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 [ 9.433905] g_ether gadget: g_ether ready [ 9.960079] g_ether gadget: high-speed config #2: CDC Ethernet (ECM) [ 21.355771] WRN:L1135(drivers/usb/sunxi_usb/udc/sunxi_udc.c):handle_ep0: ep0 setup end
  4. I have the latest version. i cna access from serial console root@bunny:~# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 9a:ff:91:11:11:11 brd ff:ff:ff:ff:ff:ff 3: tunl0: <NOARP> mtu 1480 qdisc noop state DOWN group default link/ipip brd 4: gre0: <NOARP> mtu 1476 qdisc noop state DOWN group default link/gre brd 5: sit0: <NOARP> mtu 1480 qdisc noop state DOWN group default link/sit brd 6: ip6tnl0: <NOARP> mtu 1452 qdisc noop state DOWN group default link/tunnel6 :: brd ::
  5. I did a factory reset to my bashbunny v1.5_298 and now when I connect it, the interfaces usb0 and usb1 are not created. here is the dmesg: [ 465.206690] usb 3-1: new high-speed USB device number 5 using xhci_hcd [ 465.347433] usb 3-1: New USB device found, idVendor=f000, idProduct=fff0, bcdDevice= 3.33 [ 465.347439] usb 3-1: New USB device strings: Mfr=2, Product=3, SerialNumber=7 [ 465.347443] usb 3-1: Product: RNDIS/Ethernet Gadget [ 465.347446] usb 3-1: Manufacturer: Linux 3.4.39 with sunxi_usb_udc [ 465.347448] usb 3-1: SerialNumber: ch000001
  6. the problem remains in v2.4.0
  7. I did a factory reset to my nano pineapple. then I realize that the dashboard says that the cpu is 100%. But I check top and in the API of the module and tells me otherwise. I do not know the real problem. Does anyone feel the same? any ideas? i use 2.3.2v
  8. ngrep is still not in the repositories :/
  9. I have the same problem. I can not update the bash bunny. @MB60893 your solution did not work :/
  10. how can I hide port 1471 for all, except for
  11. I have problems to connect to the open wifi network of "wifi pineapple nano", I currently have firmware 2.0.2 and I did a factory reset edit: Fixed
  12. @Whistle Master hahaha I got caught, sslsplit but I have problems with bootstrap
  13. what I have thought is the following: add an uploader add a selector add logs the openvpn.sh has errors because I still do not do the functions of the module. in the next few days I hope to have everything ready
  14. @Just_a_User I can not believe how clueless I am. I've been laughing for a while. thanks!
  15. I've been writing about creating the openvpn client module. and I got to this problem. in the web interface does not detect the installation of openvpn ("Dependencies: Not Installed") I confirmed the installation using the command which ("/usr/sbin/openvpn") and I do not know what the problem is in my code. If someone here could help me with that, I would be very grateful, I suspect that my problem is very simple, but my inexperience does not allow me to realize --> https://github.com/vay3t/openvpn-pineapple (for some strange reason the pineapple does not detect my module) any ideas?
  16. i format the SD using the pineapple and fix the problem
  17. I have problems with the SD from NANO, I can see the sd from the ssh but I can not install there. I think I'm not the only one with this problem: https://wifipineapple.com/bugs/511
  18. The iptables rules in the api are: iptables -t nat -A PREROUTING -s -p tcp --dport 80 -j DNAT --to-destination iptables -A INPUT -p tcp --dport 53 -j ACCEPT iptables -I INPUT -p tcp --dport 443 -j DROP
  19. Using evil portal I have noticed that it has some "problems" of functioning (they are not really problems) Https that does not get redirected Need internet to work Practicing in raspberry pi I was able to make a captive portal using the following rules. I do not know if they would work when editing the api of evil portal: iptables -t nat -A PREROUTING -i wlan0 -p udp --dport 53 -j DNAT --to iptables -t nat -A PREROUTING -p tcp --dport 80 -j DNAT --to-destination iptables -P FORWARD DROP The truth is that solving these two points is fundamental for me. Any suggestions or help?
  20. I have problems with tl-wn725n, I can not see it in ifconfig, I tried installing the driver using opkg but I have the following problem: root@pineapple:~# opkg install kmod-net-rtl8188eu r8188eu-firmware Installing kmod-net-rtl8188eu (3.18.20-1) to root... Downloading http://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/packages/base/kmod-net-rtl8188eu_3.18.20-1_ar71xx.ipk. Multiple packages (kmod-usb-core and kmod-usb-core) providing same name marked HOLD or PREFER. Using latest. Installing r8188eu-firmware (2014-03-16-f8c22c692bdee57a20b092e647464ff6176df3ed-1) to root... Downloading http://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/packages/base/r8188eu-firmware_2014-03-16-f8c22c692bdee57a20b092e647464ff6176df3ed-1_ar71xx.ipk. Package r8188eu-firmware (2014-03-16-f8c22c692bdee57a20b092e647464ff6176df3ed-1) installed in root is up to date. Configuring r8188eu-firmware. Configuring kmod-net-rtl8188eu. modprobe: can't change directory to '': No such file or directory Collected errors: * satisfy_dependencies_for: Cannot satisfy the following dependencies for kmod-net-rtl8188eu: * kernel (= 3.18.20-1-7bed08fa9c06eb8089e82c200340ec66) * * pkg_run_script: package "kmod-net-rtl8188eu" postinst script returned status 1. * opkg_configure: kmod-net-rtl8188eu.postinst returned 1. If the above errors were only about a kernel version missmatch, please ignore them. The package was installed successfully. kernel: Linux pineapple 3.18.36 #40 Fri Oct 28 05:42:22 UTC 2016 mips GNU/Linux lsusb: Bus 001 Device 006: ID 0bda:8179 Realtek Semiconductor Corp.
  21. It is possible to add in a "Evil Portal" module a custom url, for example. Http: //portal.local in addition to making all traffic including 443 pass through that portal, currently only redirects 80. I would like to take advantage of asking if there is any way to put the card in monitor mode from the GUI and then use the Site Survey module correctly?
  • Create New...