Hi I'm brand new to Tetra so I might be (probably am) doing something stupid, but I can't browse to http://172.16.42.1:1471.
I have the wall adapter plugged into the wall. The supplied Y connector is running from the ETH port to two USB ports on my Linux box. (I've also tried a different USB cable and only using one of the Y connectors - being careful about the thinner pigtail)
The LED on the Tetra is a steady blue.
The Linux box is connected over Ethernet to a Netgear hub that goes to a FIOS router.
When I run ipconfig I *think* I see it:
enx001337a63f0e: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
ethe rxx:xx:xx:xx:3f:0e txqueuelen 1000 (Ethernet)
RX packets 19 bytes 1456 (1.4 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
I can see that the pineapple is broadcasting wifi (I see "Pineapple_3F0B" and "Pineapple_3F0C")
However when I browse to http://172.16.42.1:1471 nothing appears on my Chrome browser.
Some odd things from the documentation:
1) Running ipconfig no inet devices appear in the 172.16.42.X range but I do see my linux box in the 192.168.1.X range.
2) The SSID that broadcast are not the last four octets of the mac address (shouldn't it be 3F0E?)
I've tried to reset the Tetra which I assume turns off the Tetra's Wifi so now I don't see the SSIDs.
What's my next step to start the setup process?