[Continuous Firmware Recovery Loop?!]

6 hours ago, Fang_Shadow said:

Is the device getting enough power, sometime if the device is connected to the computer instead of a powerblock like the iphone wall based usb block, sometimes the device doesn't get enough or faulty power and causes it to do a sort of loop to try and fix itself. Instead of letting do this loop, why not force the BB into DFU mode from plug in to the block after the green light goes off, unplug do this 3 more times then just leave it. it should go through the flash process correctly. I have never had this issue as of yet, but this is just a theory of what is going on with your devices.

Thank you for the comprehensive response.
I run the update on a PC and on a USB power supply. Same result (loops).
Just two questions since I am not sure about your answer:
- What do you mean by "DFU mode"?
- Which "green light goes off" do you mean? The one after 04:25 or after 04:50 or just after the first one - times see in initial post?

[Continuous Firmware Recovery Loop?!]

9 hours ago, rattyss said:

So have you been able to figure anything out to get your BB working again?

Is anyone else having this problem?

Any help would be appreciated.

I still have the issue.

[Continuous Firmware Recovery Loop?!]

My Update to 1.1 failed.
I did wrong and put the unpacked gz file beside the packed one (I should have read this one https://forums.hak5.org/index.php?/topic/40681-help-installing-11-update/) . 
Since the device does not start properly. First it fails three times (LED is first green, turns off and stays off). As described here http://wiki.bashbunny.com/#!././index.md#Firmware_Recovery) the firmware recovery seems to start withteh forth start.

Here is what the LED says:
00:00    green
00:04    off
00:07     red blinking
04:05    blue/red
04:25    green
04:29    off
04:32    red blinking
04:47    off
04:50    green
04:54    off - stays off

Afterwards its starts from strach. Three time green, off and stays off. Forth time same recovery procedure.

Does anybody have the same issue? Any way to break trough this loop?

BTW The bunny itself becomes very hot.