Jump to content

sbb

Active Members
  • Content Count

    17
  • Joined

  • Last visited

About sbb

  • Rank
    Hak5 Fan

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Thanks, I do have PineAP set up to start automatically so that's gotta be it. I will give this another try at home with the same setup and see if it works.
  2. That caught my eye too when I was testing but when I clicked "Scan" to find all of the SSID's around, there was only one instance of that open AP in the list for me to choose from. I am not at the location to re-test this but I will have to give it another shot in the future. Just wanted to make sure I didn't have anything set up incorrectly. For future reference, should I have just thrown the public access point into the deny list for PineAP in order to omit it from being re-broadcast or is there another way to blacklist it?
  3. I hooked up my ALFA USB adapter to my nano today and took it along with my battery to a local site. The nano detected it without issue as wlan2. In the networking section, I selected the open access point that was being broadcast as this location using wlan2 as the adapter and it seemed to get its IP / connection. However, when I connected to the management AP for the nano and tried to get the updates to see if there was a connection, it kept saying it failed. This makes me think that the few clients that did connect would have had no internet access. Should I have been able see these pineapple bulletin updates with this setup? There didn't appear to be any captive portal options I needed to click when I did this from my iPhone so I assumed the WiFi usb adapter shouldn't have had any issue connecting to the AP. Thoughts?
  4. For the nano, which antenna would be best replace with a yagi antenna? I understand that one is used for sending and the other receiving but I am not sure which one actually does what in order to replace it. Could anyone tell me which side of the nano a single yagi antenna would work best in?
  5. I am kinda in the same boat on this one. I bought a cheap android phone (prepaid) and doesn't have service, only use it for WiFi. I don't know if its the phones limitation or what but there is no option to create a hot spot / tether on there, even though its running a new Android OS. The only way I was able to do it without using a laptop was to connect to the management wifi on it. It is a rooted android phone, I will have to see if there is an app in the marketplace that might enable such feature.
  6. Awesome, I assumed that a public location or a de-auth would be the best way to do it.
  7. I received this exact same error when trying to run. I am using an SD card on the Nano. Here are the logs requested. Forgive me if they are too much info, wasn't sure where the data started that you needed within them. dmesg: Mana Toolkit has been shutdown. root@Pineapple:~# dmesg [ 0.000000] Linux version 3.18.36 (openwrt@651d0feeed27) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49403) ) #40 Fri Oct 28 05:42:22 UTC 2016 [ 0.000000] MyLoader: sysp=8a14b024, boardp=44b65156, parts=b69f8d32 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc) [ 0.000000] SoC: Atheros AR9330 rev 1 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 04000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x03ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x03ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff] [ 0.000000] On node 0 totalpages: 16384 [ 0.000000] free_area_init_node: node 0, pgdat 80355cf0, node_mem_map 81000000 [ 0.000000] Normal zone: 128 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 16384 pages, LIFO batch:3 [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: board=PINEAPPLE-NANO console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 60944K/65536K available (2467K kernel code, 126K rwdata, 528K rodata, 260K init, 188K bss, 4592K reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:51 [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) [ 0.080000] pid_max: default: 32768 minimum: 301 [ 0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.100000] NET: Registered protocol family 16 [ 0.100000] MIPS: machine is WiFi Pineapple NANO [ 0.380000] Switched to clocksource MIPS [ 0.380000] NET: Registered protocol family 2 [ 0.390000] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.390000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.400000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.400000] TCP: reno registered [ 0.410000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.410000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.420000] NET: Registered protocol family 1 [ 0.420000] PCI: CLS 0 bytes, default 32 [ 0.420000] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.440000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.440000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.450000] msgmni has been set to 119 [ 0.460000] io scheduler noop registered [ 0.460000] io scheduler deadline registered (default) [ 0.470000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.470000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a AR933X UART [ 0.480000] console [ttyATH0] enabled [ 0.490000] bootconsole [early0] disabled [ 0.500000] m25p80 spi0.0: found mx25l12805d, expected m25p80 [ 0.500000] m25p80 spi0.0: mx25l12805d (16384 Kbytes) [ 0.520000] 5 tp-link partitions found on MTD device spi0.0 [ 0.520000] Creating 5 MTD partitions on "spi0.0": [ 0.520000] 0x000000000000-0x000000020000 : "u-boot" [ 0.530000] 0x000000020000-0x000000134f84 : "kernel" [ 0.540000] 0x000000134f84-0x000000ff0000 : "rootfs" [ 0.540000] mtd: device 2 (rootfs) set to be root filesystem [ 0.550000] 1 squashfs-split partitions found on MTD device rootfs [ 0.550000] 0x000000dc0000-0x000000ff0000 : "rootfs_data" [ 0.560000] 0x000000ff0000-0x000001000000 : "art" [ 0.560000] 0x000000020000-0x000000ff0000 : "firmware" [ 0.590000] libphy: ag71xx_mdio: probed [ 1.190000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY] [ 1.200000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII [ 1.200000] TCP: cubic registered [ 1.200000] NET: Registered protocol family 17 [ 1.210000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 1.220000] 8021q: 802.1Q VLAN Support v1.8 [ 1.230000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. [ 1.240000] Freeing unused kernel memory: 260K (8036f000 - 803b0000) [ 2.620000] init: Console is alive [ 2.620000] init: - watchdog - [ 5.290000] usbcore: registered new interface driver usbfs [ 5.300000] usbcore: registered new interface driver hub [ 5.300000] usbcore: registered new device driver usb [ 5.360000] SCSI subsystem initialized [ 5.370000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.380000] ehci-platform: EHCI generic platform driver [ 5.380000] ehci-platform ehci-platform: EHCI Host Controller [ 5.390000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1 [ 5.400000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000 [ 5.420000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00 [ 5.420000] hub 1-0:1.0: USB hub found [ 5.420000] hub 1-0:1.0: 1 port detected [ 5.430000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.440000] ohci-platform: OHCI generic platform driver [ 5.450000] uhci_hcd: USB Universal Host Controller Interface driver [ 5.460000] usbcore: registered new interface driver usb-storage [ 5.690000] init: - preinit - [ 5.800000] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 6.430000] random: procd urandom read with 10 bits of entropy available [ 6.430000] hub 1-1:1.0: USB hub found [ 6.440000] hub 1-1:1.0: 4 ports detected [ 6.670000] mount_root: loading kmods from internal overlay [ 6.970000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform [ 7.100000] jffs2: notice: (325) jffs2_build_xattr_subsystem: complete building xattr subsystem, 13 of xdatum (0 unchecked, 13 orphan) and 13 of xref (0 dead, 13 orphan) found. [ 7.120000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab [ 7.130000] block: extroot: not configured [ 7.210000] jffs2: notice: (322) jffs2_build_xattr_subsystem: complete building xattr subsystem, 13 of xdatum (0 unchecked, 13 orphan) and 13 of xref (0 dead, 13 orphan) found. [ 7.340000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab [ 7.350000] block: extroot: not configured [ 7.350000] mount_root: switching to jffs2 overlay [ 7.420000] procd: - early - [ 7.430000] procd: - watchdog - [ 8.140000] procd: - ubus - [ 9.160000] procd: - init - [ 10.840000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68 [ 10.840000] Backport generated by backports.git backports-20151218-0-g2f58d9d [ 11.000000] ath: EEPROM regdomain: 0x0 [ 11.000000] ath: EEPROM indicates default country code should be used [ 11.000000] ath: doing EEPROM country->regdmn map search [ 11.000000] ath: country maps to regdmn code: 0x3a [ 11.000000] ath: Country alpha2 being used: US [ 11.000000] ath: Regpair used: 0x3a [ 11.010000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 11.020000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2 [ 11.040000] usbcore: registered new interface driver ath9k_htc [ 11.090000] RPC: Registered named UNIX socket transport module. [ 11.090000] RPC: Registered udp transport module. [ 11.090000] RPC: Registered tcp transport module. [ 11.100000] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 11.130000] tun: Universal TUN/TAP device driver, 1.6 [ 11.130000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 11.180000] usbcore: registered new interface driver rt2800usb [ 11.190000] usbcore: registered new interface driver rtl8187 [ 11.340000] usbcore: registered new interface driver rtl8192cu [ 11.390000] usbcore: registered new interface driver cdc_acm [ 11.400000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 11.420000] usbcore: registered new interface driver cdc_wdm [ 11.440000] nf_conntrack version 0.5.0 (956 buckets, 3824 max) [ 11.500000] usbcore: registered new interface driver ums-alauda [ 11.510000] usbcore: registered new interface driver ums-cypress [ 11.520000] usbcore: registered new interface driver ums-datafab [ 11.530000] usbcore: registered new interface driver ums-freecom [ 11.540000] usbcore: registered new interface driver ums-isd200 [ 11.550000] usbcore: registered new interface driver ums-jumpshot [ 11.560000] usbcore: registered new interface driver ums-karma [ 11.570000] usbcore: registered new interface driver ums-sddr09 [ 11.570000] usbcore: registered new interface driver ums-sddr55 [ 11.580000] usbcore: registered new interface driver ums-usbat [ 11.600000] usbcore: registered new interface driver usbserial [ 11.610000] usbcore: registered new interface driver usbserial_generic [ 11.610000] usbserial: USB Serial support registered for generic [ 11.670000] xt_time: kernel timezone is -0000 [ 11.680000] usbcore: registered new interface driver asix [ 11.690000] usbcore: registered new interface driver ax88179_178a [ 11.690000] usbcore: registered new interface driver cdc_ether [ 11.700000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.730000] usbcore: registered new interface driver pl2303 [ 11.730000] usbserial: USB Serial support registered for pl2303 [ 11.740000] PPP generic driver version 2.4.2 [ 11.750000] NET: Registered protocol family 24 [ 11.750000] usbcore: registered new interface driver qmi_wwan [ 11.770000] usbcore: registered new interface driver rndis_host [ 11.770000] usbcore: registered new interface driver sierra_net [ 11.790000] usbcore: registered new interface driver option [ 11.790000] usbserial: USB Serial support registered for GSM modem (1-port) [ 12.050000] usb 1-1.1: device descriptor read/64, error -145 [ 12.310000] usb 1-1.1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested [ 12.430000] usb 1-1.2: new high-speed USB device number 4 using ehci-platform [ 12.620000] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 12.650000] scsi host0: usb-storage 1-1.2:1.0 [ 12.800000] usb 1-1.1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 [ 13.310000] ath9k_htc 1-1.1:1.0: ath9k_htc: HTC initialized with 33 credits [ 13.760000] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE 0933 PQ: 0 ANSI: 6 [ 13.770000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 14.170000] sd 0:0:0:0: [sda] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB) [ 14.200000] sd 0:0:0:0: [sda] Write Protect is off [ 14.200000] sd 0:0:0:0: [sda] Mode Sense: 21 00 00 00 [ 14.200000] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 14.250000] ath9k_htc 1-1.1:1.0: ath9k_htc: FW Version: 1.4 [ 14.250000] ath9k_htc 1-1.1:1.0: FW RMW support: On [ 14.260000] ath: EEPROM regdomain: 0x0 [ 14.260000] ath: EEPROM indicates default country code should be used [ 14.260000] ath: doing EEPROM country->regdmn map search [ 14.260000] ath: country maps to regdmn code: 0x3a [ 14.260000] ath: Country alpha2 being used: US [ 14.260000] ath: Regpair used: 0x3a [ 14.270000] sda: sda1 sda2 [ 14.280000] ieee80211 phy1: Atheros AR9271 Rev:1 [ 14.310000] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 17.310000] usb 1-1.2: USB disconnect, device number 4 [ 17.320000] scsi 0:0:0:0: rejecting I/O to offline device [ 17.320000] scsi 0:0:0:0: [sda] killing request [ 17.330000] scsi 0:0:0:0: [sda] [ 17.330000] Result: hostbyte=0x01 driverbyte=0x00 [ 17.340000] scsi 0:0:0:0: [sda] CDB: [ 17.340000] cdb[0]=0x28: 28 00 00 00 00 20 00 00 40 00 [ 17.350000] blk_update_request: I/O error, dev sda, sector 32 [ 17.350000] Buffer I/O error on dev sda, logical block 7, async page read [ 20.580000] usb 1-1.2: new high-speed USB device number 5 using ehci-platform [ 20.720000] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 20.760000] scsi host1: usb-storage 1-1.2:1.0 [ 21.760000] scsi 1:0:0:0: Direct-Access Generic STORAGE DEVICE 0933 PQ: 0 ANSI: 6 [ 21.760000] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 22.330000] sd 1:0:0:0: [sda] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB) [ 22.340000] sd 1:0:0:0: [sda] Write Protect is off [ 22.340000] sd 1:0:0:0: [sda] Mode Sense: 21 00 00 00 [ 22.340000] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 22.400000] sda: sda1 sda2 [ 22.400000] sd 1:0:0:0: [sda] Attached SCSI removable disk [ 23.900000] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ 23.920000] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities [ 24.560000] random: nonblocking pool is initialized [ 25.270000] usb 1-1.2: USB disconnect, device number 5 [ 25.280000] sd 1:0:0:0: [sda] [ 25.280000] Result: hostbyte=0x01 driverbyte=0x00 [ 25.280000] sd 1:0:0:0: [sda] CDB: [ 25.290000] cdb[0]=0x28: 28 00 01 e2 d3 85 00 00 f0 00 [ 25.290000] blk_update_request: I/O error, dev sda, sector 31642501 [ 25.300000] JBD2: Failed to read block at offset 1513 [ 25.300000] JBD2: IO error -5 recovering block 1513 in log [ 25.310000] JBD2: Failed to read block at offset 1514 [ 25.310000] JBD2: IO error -5 recovering block 1514 in log [ 25.320000] JBD2: Failed to read block at offset 1515 [ 25.330000] JBD2: IO error -5 recovering block 1515 in log [ 25.330000] JBD2: Failed to read block at offset 1516 [ 25.340000] JBD2: IO error -5 recovering block 1516 in log [ 25.340000] JBD2: Failed to read block at offset 1517 [ 25.350000] JBD2: IO error -5 recovering block 1517 in log [ 25.350000] JBD2: Failed to read block at offset 1518 [ 25.360000] JBD2: IO error -5 recovering block 1518 in log [ 25.360000] JBD2: Failed to read block at offset 1519 [ 25.370000] JBD2: IO error -5 recovering block 1519 in log [ 25.370000] JBD2: Failed to read block at offset 1520 [ 25.380000] JBD2: IO error -5 recovering block 1520 in log [ 25.380000] JBD2: Failed to read block at offset 1521 [ 25.390000] JBD2: IO error -5 recovering block 1521 in log [ 25.390000] JBD2: Failed to read block at offset 1522 [ 25.400000] JBD2: IO error -5 recovering block 1522 in log [ 25.400000] JBD2: Failed to read block at offset 1523 [ 25.410000] JBD2: IO error -5 recovering block 1523 in log [ 25.410000] JBD2: Failed to read block at offset 1524 [ 25.420000] JBD2: IO error -5 recovering block 1524 in log [ 25.430000] JBD2: Failed to read block at offset 1525 [ 25.430000] JBD2: IO error -5 recovering block 1525 in log [ 25.440000] JBD2: Failed to read block at offset 1526 [ 25.440000] JBD2: IO error -5 recovering block 1526 in log [ 25.450000] JBD2: Failed to read block at offset 1527 [ 25.450000] JBD2: IO error -5 recovering block 1527 in log [ 25.460000] JBD2: Failed to read block at offset 1528 [ 25.460000] JBD2: IO error -5 recovering block 1528 in log [ 25.470000] JBD2: Failed to read block at offset 1529 [ 25.470000] JBD2: IO error -5 recovering block 1529 in log [ 25.480000] JBD2: Failed to read block at offset 1530 [ 25.480000] JBD2: IO error -5 recovering block 1530 in log [ 25.490000] JBD2: Failed to read block at offset 1531 [ 25.490000] JBD2: IO error -5 recovering block 1531 in log [ 25.500000] JBD2: Failed to read block at offset 1532 [ 25.500000] JBD2: IO error -5 recovering block 1532 in log [ 25.510000] JBD2: Failed to read block at offset 1533 [ 25.510000] JBD2: IO error -5 recovering block 1533 in log [ 25.520000] JBD2: Failed to read block at offset 1534 [ 25.520000] JBD2: IO error -5 recovering block 1534 in log [ 25.530000] JBD2: Failed to read block at offset 1535 [ 25.540000] JBD2: IO error -5 recovering block 1535 in log [ 25.540000] JBD2: Failed to read block at offset 1536 [ 25.550000] JBD2: IO error -5 recovering block 1536 in log [ 25.550000] JBD2: Failed to read block at offset 1537 [ 25.560000] JBD2: IO error -5 recovering block 1537 in log [ 25.560000] JBD2: Failed to read block at offset 1538 [ 25.570000] JBD2: IO error -5 recovering block 1538 in log [ 25.570000] JBD2: Failed to read block at offset 1539 [ 25.580000] JBD2: IO error -5 recovering block 1539 in log [ 25.580000] JBD2: Failed to read block at offset 1540 [ 25.590000] JBD2: IO error -5 recovering block 1540 in log [ 25.590000] JBD2: Failed to read block at offset 1541 [ 25.600000] JBD2: IO error -5 recovering block 1541 in log [ 25.600000] JBD2: Failed to read block at offset 1542 [ 25.610000] JBD2: IO error -5 recovering block 1542 in log [ 25.620000] JBD2: Failed to read block at offset 1543 [ 25.620000] JBD2: IO error -5 recovering block 1543 in log [ 25.620000] JBD2: Failed to read block at offset 1544 [ 25.630000] JBD2: IO error -5 recovering block 1544 in log [ 25.640000] JBD2: Failed to read block at offset 1545 [ 25.640000] JBD2: IO error -5 recovering block 1545 in log [ 25.650000] JBD2: Failed to read block at offset 1546 [ 25.650000] JBD2: IO error -5 recovering block 1546 in log [ 25.660000] JBD2: Failed to read block at offset 1547 [ 25.660000] JBD2: IO error -5 recovering block 1547 in log [ 25.670000] JBD2: Failed to read block at offset 1548 [ 25.670000] JBD2: IO error -5 recovering block 1548 in log [ 25.680000] JBD2: Failed to read block at offset 1549 [ 25.680000] JBD2: IO error -5 recovering block 1549 in log [ 25.690000] JBD2: Failed to read block at offset 1550 [ 25.690000] JBD2: IO error -5 recovering block 1550 in log [ 25.700000] JBD2: Failed to read block at offset 1551 [ 25.700000] JBD2: IO error -5 recovering block 1551 in log [ 25.710000] JBD2: Failed to read block at offset 1552 [ 25.710000] JBD2: IO error -5 recovering block 1552 in log [ 25.720000] JBD2: Failed to read block at offset 1553 [ 25.720000] JBD2: IO error -5 recovering block 1553 in log [ 25.730000] JBD2: Failed to read block at offset 1554 [ 25.730000] JBD2: IO error -5 recovering block 1554 in log [ 25.740000] JBD2: Failed to read block at offset 1555 [ 25.750000] JBD2: IO error -5 recovering block 1555 in log [ 25.750000] JBD2: Failed to read block at offset 1556 [ 25.760000] JBD2: IO error -5 recovering block 1556 in log [ 25.760000] JBD2: Failed to read block at offset 1557 [ 25.770000] JBD2: IO error -5 recovering block 1557 in log [ 25.770000] JBD2: Failed to read block at offset 1558 [ 25.780000] JBD2: IO error -5 recovering block 1558 in log [ 25.780000] JBD2: Failed to read block at offset 1559 [ 25.790000] JBD2: IO error -5 recovering block 1559 in log [ 25.790000] JBD2: Failed to read block at offset 1560 [ 25.800000] JBD2: IO error -5 recovering block 1560 in log [ 25.800000] JBD2: Failed to read block at offset 1561 [ 25.810000] JBD2: IO error -5 recovering block 1561 in log [ 25.810000] JBD2: Failed to read block at offset 1562 [ 25.820000] JBD2: IO error -5 recovering block 1562 in log [ 25.820000] JBD2: Failed to read block at offset 1563 [ 25.830000] JBD2: IO error -5 recovering block 1563 in log [ 25.840000] JBD2: Failed to read block at offset 1564 [ 25.840000] JBD2: IO error -5 recovering block 1564 in log [ 25.850000] JBD2: Failed to read block at offset 1565 [ 25.850000] JBD2: IO error -5 recovering block 1565 in log [ 25.860000] JBD2: Failed to read block at offset 1566 [ 25.860000] JBD2: IO error -5 recovering block 1566 in log [ 25.870000] JBD2: Failed to read block at offset 1567 [ 25.870000] JBD2: IO error -5 recovering block 1567 in log [ 25.880000] JBD2: Failed to read block at offset 1568 [ 25.880000] JBD2: IO error -5 recovering block 1568 in log [ 25.890000] JBD2: Failed to read block at offset 1569 [ 25.890000] JBD2: IO error -5 recovering block 1569 in log [ 25.900000] JBD2: Failed to read block at offset 1570 [ 25.900000] JBD2: IO error -5 recovering block 1570 in log [ 25.910000] JBD2: Failed to read block at offset 1571 [ 25.910000] JBD2: IO error -5 recovering block 1571 in log [ 25.920000] JBD2: Failed to read block at offset 1572 [ 25.920000] JBD2: IO error -5 recovering block 1572 in log [ 25.930000] JBD2: Failed to read block at offset 1573 [ 25.930000] JBD2: IO error -5 recovering block 1573 in log [ 25.940000] JBD2: Failed to read block at offset 1574 [ 25.950000] JBD2: IO error -5 recovering block 1574 in log [ 25.950000] JBD2: Failed to read block at offset 1575 [ 25.960000] JBD2: IO error -5 recovering block 1575 in log [ 25.960000] JBD2: Failed to read block at offset 1576 [ 25.970000] JBD2: IO error -5 recovering block 1576 in log [ 25.970000] JBD2: Failed to read block at offset 1577 [ 25.980000] JBD2: IO error -5 recovering block 1577 in log [ 25.980000] JBD2: Failed to read block at offset 1578 [ 25.990000] JBD2: IO error -5 recovering block 1578 in log [ 25.990000] JBD2: Failed to read block at offset 1579 [ 26.000000] JBD2: IO error -5 recovering block 1579 in log [ 26.000000] JBD2: Failed to read block at offset 1580 [ 26.010000] JBD2: IO error -5 recovering block 1580 in log [ 26.010000] JBD2: Failed to read block at offset 1581 [ 26.020000] JBD2: IO error -5 recovering block 1581 in log [ 26.020000] JBD2: Failed to read block at offset 1582 [ 26.030000] JBD2: IO error -5 recovering block 1582 in log [ 26.030000] JBD2: Failed to read block at offset 1583 [ 26.040000] JBD2: IO error -5 recovering block 1583 in log [ 26.050000] JBD2: Failed to read block at offset 1584 [ 26.050000] JBD2: IO error -5 recovering block 1584 in log [ 26.060000] JBD2: Failed to read block at offset 1585 [ 26.060000] JBD2: IO error -5 recovering block 1585 in log [ 26.070000] JBD2: Failed to read block at offset 1586 [ 26.070000] JBD2: IO error -5 recovering block 1586 in log [ 26.080000] JBD2: Failed to read block at offset 1587 [ 26.080000] JBD2: IO error -5 recovering block 1587 in log [ 26.090000] JBD2: Failed to read block at offset 1588 [ 26.090000] JBD2: IO error -5 recovering block 1588 in log [ 26.120000] JBD2: Failed to read block at offset 1621 [ 26.120000] JBD2: IO error -5 recovering block 1621 in log [ 26.130000] JBD2: Failed to read block at offset 1622 [ 26.130000] JBD2: IO error -5 recovering block 1622 in log [ 26.140000] JBD2: Failed to read block at offset 1623 [ 26.140000] JBD2: IO error -5 recovering block 1623 in log [ 26.150000] JBD2: Failed to read block at offset 1624 [ 26.150000] JBD2: IO error -5 recovering block 1624 in log [ 26.160000] JBD2: Failed to read block at offset 1625 [ 26.160000] JBD2: IO error -5 recovering block 1625 in log [ 26.170000] JBD2: Failed to read block at offset 1626 [ 26.170000] JBD2: IO error -5 recovering block 1626 in log [ 26.180000] JBD2: Failed to read block at offset 1627 [ 26.180000] JBD2: IO error -5 recovering block 1627 in log [ 26.190000] JBD2: Failed to read block at offset 1628 [ 26.200000] JBD2: IO error -5 recovering block 1628 in log [ 26.200000] JBD2: Failed to read block at offset 1629 [ 26.210000] JBD2: IO error -5 recovering block 1629 in log [ 26.210000] JBD2: Failed to read block at offset 1630 [ 26.220000] JBD2: IO error -5 recovering block 1630 in log [ 26.220000] JBD2: Failed to read block at offset 1631 [ 26.230000] JBD2: IO error -5 recovering block 1631 in log [ 26.230000] JBD2: Failed to read block at offset 1632 [ 26.240000] JBD2: IO error -5 recovering block 1632 in log [ 26.240000] JBD2: Failed to read block at offset 1633 [ 26.250000] JBD2: IO error -5 recovering block 1633 in log [ 26.250000] JBD2: Failed to read block at offset 1634 [ 26.260000] JBD2: IO error -5 recovering block 1634 in log [ 26.260000] JBD2: Failed to read block at offset 1635 [ 26.270000] JBD2: IO error -5 recovering block 1635 in log [ 26.270000] JBD2: Failed to read block at offset 1636 [ 26.280000] JBD2: IO error -5 recovering block 1636 in log [ 26.280000] JBD2: Failed to read block at offset 1637 [ 26.290000] JBD2: IO error -5 recovering block 1637 in log [ 26.300000] JBD2: Failed to read block at offset 1638 [ 26.300000] JBD2: IO error -5 recovering block 1638 in log [ 26.310000] JBD2: Failed to read block at offset 1639 [ 26.310000] JBD2: IO error -5 recovering block 1639 in log [ 26.320000] JBD2: Failed to read block at offset 1640 [ 26.320000] JBD2: IO error -5 recovering block 1640 in log [ 26.330000] JBD2: Failed to read block at offset 1641 [ 26.330000] JBD2: IO error -5 recovering block 1641 in log [ 26.340000] JBD2: Failed to read block at offset 1642 [ 26.340000] JBD2: IO error -5 recovering block 1642 in log [ 26.350000] JBD2: Failed to read block at offset 1643 [ 26.350000] JBD2: IO error -5 recovering block 1643 in log [ 26.360000] JBD2: Failed to read block at offset 1644 [ 26.360000] JBD2: IO error -5 recovering block 1644 in log [ 26.370000] JBD2: Failed to read block at offset 1645 [ 26.370000] JBD2: IO error -5 recovering block 1645 in log [ 26.380000] JBD2: Failed to read block at offset 1646 [ 26.380000] JBD2: IO error -5 recovering block 1646 in log [ 26.390000] JBD2: Failed to read block at offset 1647 [ 26.390000] JBD2: IO error -5 recovering block 1647 in log [ 26.400000] JBD2: Failed to read block at offset 1648 [ 26.410000] JBD2: IO error -5 recovering block 1648 in log [ 26.410000] JBD2: Failed to read block at offset 1649 [ 26.420000] JBD2: IO error -5 recovering block 1649 in log [ 26.420000] JBD2: Failed to read block at offset 1650 [ 26.430000] JBD2: IO error -5 recovering block 1650 in log [ 26.430000] JBD2: Failed to read block at offset 1651 [ 26.440000] JBD2: IO error -5 recovering block 1651 in log [ 26.440000] JBD2: Failed to read block at offset 1652 [ 26.450000] JBD2: IO error -5 recovering block 1652 in log [ 26.450000] JBD2: Failed to read block at offset 1653 [ 26.460000] JBD2: IO error -5 recovering block 1653 in log [ 26.460000] JBD2: Failed to read block at offset 1654 [ 26.470000] JBD2: IO error -5 recovering block 1654 in log [ 26.470000] JBD2: Failed to read block at offset 1655 [ 26.480000] JBD2: IO error -5 recovering block 1655 in log [ 26.480000] JBD2: Failed to read block at offset 1656 [ 26.490000] JBD2: IO error -5 recovering block 1656 in log [ 26.490000] JBD2: Failed to read block at offset 1657 [ 26.500000] JBD2: IO error -5 recovering block 1657 in log [ 26.510000] JBD2: Failed to read block at offset 1658 [ 26.510000] JBD2: IO error -5 recovering block 1658 in log [ 26.520000] JBD2: Failed to read block at offset 1659 [ 26.520000] JBD2: IO error -5 recovering block 1659 in log [ 26.530000] JBD2: Failed to read block at offset 1660 [ 26.530000] JBD2: IO error -5 recovering block 1660 in log [ 26.540000] JBD2: Failed to read block at offset 1661 [ 26.540000] JBD2: IO error -5 recovering block 1661 in log [ 26.550000] JBD2: Failed to read block at offset 1662 [ 26.550000] JBD2: IO error -5 recovering block 1662 in log [ 26.560000] JBD2: Failed to read block at offset 1663 [ 26.560000] JBD2: IO error -5 recovering block 1663 in log [ 26.570000] JBD2: Failed to read block at offset 1664 [ 26.570000] JBD2: IO error -5 recovering block 1664 in log [ 26.580000] JBD2: Failed to read block at offset 1665 [ 26.580000] JBD2: IO error -5 recovering block 1665 in log [ 26.590000] JBD2: Failed to read block at offset 1666 [ 26.590000] JBD2: IO error -5 recovering block 1666 in log [ 26.600000] JBD2: Failed to read block at offset 1667 [ 26.600000] JBD2: IO error -5 recovering block 1667 in log [ 26.610000] JBD2: Failed to read block at offset 1668 [ 26.620000] JBD2: IO error -5 recovering block 1668 in log [ 26.620000] JBD2: Failed to read block at offset 1669 [ 26.630000] JBD2: IO error -5 recovering block 1669 in log [ 26.630000] JBD2: Failed to read block at offset 1670 [ 26.640000] JBD2: IO error -5 recovering block 1670 in log [ 26.640000] JBD2: Failed to read block at offset 1671 [ 26.650000] JBD2: IO error -5 recovering block 1671 in log [ 26.650000] JBD2: Failed to read block at offset 1672 [ 26.660000] JBD2: IO error -5 recovering block 1672 in log [ 26.660000] JBD2: Failed to read block at offset 1673 [ 26.670000] JBD2: IO error -5 recovering block 1673 in log [ 26.670000] JBD2: Failed to read block at offset 1674 [ 26.680000] JBD2: IO error -5 recovering block 1674 in log [ 26.680000] JBD2: Failed to read block at offset 1675 [ 26.690000] JBD2: IO error -5 recovering block 1675 in log [ 26.690000] JBD2: Failed to read block at offset 1676 [ 26.700000] JBD2: IO error -5 recovering block 1676 in log [ 26.700000] JBD2: Failed to read block at offset 1677 [ 26.710000] JBD2: IO error -5 recovering block 1677 in log [ 26.720000] JBD2: Failed to read block at offset 1678 [ 26.720000] JBD2: IO error -5 recovering block 1678 in log [ 26.730000] JBD2: Failed to read block at offset 1679 [ 26.730000] JBD2: IO error -5 recovering block 1679 in log [ 26.740000] JBD2: Failed to read block at offset 1680 [ 26.740000] JBD2: IO error -5 recovering block 1680 in log [ 26.750000] JBD2: Failed to read block at offset 1681 [ 26.750000] JBD2: IO error -5 recovering block 1681 in log [ 26.760000] JBD2: Failed to read block at offset 1682 [ 26.760000] JBD2: IO error -5 recovering block 1682 in log [ 26.770000] JBD2: Failed to read block at offset 1683 [ 26.770000] JBD2: IO error -5 recovering block 1683 in log [ 26.780000] JBD2: Failed to read block at offset 1684 [ 26.780000] JBD2: IO error -5 recovering block 1684 in log [ 26.790000] JBD2: Failed to read block at offset 1685 [ 26.790000] JBD2: IO error -5 recovering block 1685 in log [ 26.800000] JBD2: Failed to read block at offset 1686 [ 26.800000] JBD2: IO error -5 recovering block 1686 in log [ 26.810000] JBD2: Failed to read block at offset 1687 [ 26.810000] JBD2: IO error -5 recovering block 1687 in log [ 26.820000] JBD2: Failed to read block at offset 1688 [ 26.830000] JBD2: IO error -5 recovering block 1688 in log [ 26.830000] JBD2: Failed to read block at offset 1689 [ 26.840000] JBD2: IO error -5 recovering block 1689 in log [ 26.840000] JBD2: Failed to read block at offset 1690 [ 26.850000] JBD2: IO error -5 recovering block 1690 in log [ 26.850000] JBD2: Failed to read block at offset 1691 [ 26.860000] JBD2: IO error -5 recovering block 1691 in log [ 26.860000] JBD2: Failed to read block at offset 1692 [ 26.870000] JBD2: IO error -5 recovering block 1692 in log [ 26.870000] JBD2: Failed to read block at offset 1693 [ 26.880000] JBD2: IO error -5 recovering block 1693 in log [ 26.880000] JBD2: Failed to read block at offset 1694 [ 26.890000] JBD2: IO error -5 recovering block 1694 in log [ 26.890000] JBD2: Failed to read block at offset 1695 [ 26.900000] JBD2: IO error -5 recovering block 1695 in log [ 26.900000] JBD2: Failed to read block at offset 1696 [ 26.910000] JBD2: IO error -5 recovering block 1696 in log [ 26.910000] JBD2: Failed to read block at offset 1697 [ 26.920000] JBD2: IO error -5 recovering block 1697 in log [ 26.930000] JBD2: Failed to read block at offset 1698 [ 26.930000] JBD2: IO error -5 recovering block 1698 in log [ 26.940000] JBD2: Failed to read block at offset 1699 [ 26.940000] JBD2: IO error -5 recovering block 1699 in log [ 26.950000] JBD2: Failed to read block at offset 1700 [ 26.950000] JBD2: IO error -5 recovering block 1700 in log [ 26.960000] JBD2: Failed to read block at offset 1701 [ 26.960000] JBD2: IO error -5 recovering block 1701 in log [ 26.970000] JBD2: Failed to read block at offset 1702 [ 26.970000] JBD2: IO error -5 recovering block 1702 in log [ 26.980000] JBD2: Failed to read block at offset 1703 [ 26.980000] JBD2: IO error -5 recovering block 1703 in log [ 26.990000] JBD2: Failed to read block at offset 1704 [ 26.990000] JBD2: IO error -5 recovering block 1704 in log [ 27.000000] JBD2: Failed to read block at offset 1705 [ 27.000000] JBD2: IO error -5 recovering block 1705 in log [ 27.010000] JBD2: Failed to read block at offset 1706 [ 27.010000] JBD2: IO error -5 recovering block 1706 in log [ 27.020000] JBD2: Failed to read block at offset 1707 [ 27.030000] JBD2: IO error -5 recovering block 1707 in log [ 27.030000] JBD2: Failed to read block at offset 1708 [ 27.040000] JBD2: IO error -5 recovering block 1708 in log [ 27.040000] JBD2: Failed to read block at offset 1709 [ 27.050000] JBD2: IO error -5 recovering block 1709 in log [ 27.050000] JBD2: Failed to read block at offset 1710 [ 27.060000] JBD2: IO error -5 recovering block 1710 in log [ 27.060000] JBD2: Failed to read block at offset 1711 [ 27.070000] JBD2: IO error -5 recovering block 1711 in log [ 27.070000] JBD2: Failed to read block at offset 1712 [ 27.080000] JBD2: IO error -5 recovering block 1712 in log [ 27.080000] JBD2: Failed to read block at offset 1713 [ 27.090000] JBD2: IO error -5 recovering block 1713 in log [ 27.090000] JBD2: Failed to read block at offset 1714 [ 27.100000] JBD2: IO error -5 recovering block 1714 in log [ 27.100000] JBD2: Failed to read block at offset 1715 [ 27.110000] JBD2: IO error -5 recovering block 1715 in log [ 27.110000] JBD2: Failed to read block at offset 1716 [ 27.120000] JBD2: IO error -5 recovering block 1716 in log [ 27.130000] JBD2: Failed to read block at offset 1717 [ 27.130000] JBD2: IO error -5 recovering block 1717 in log [ 27.140000] JBD2: Failed to read block at offset 1718 [ 27.140000] JBD2: IO error -5 recovering block 1718 in log [ 27.150000] JBD2: Failed to read block at offset 1719 [ 27.150000] JBD2: IO error -5 recovering block 1719 in log [ 27.160000] JBD2: Failed to read block at offset 1720 [ 27.160000] JBD2: IO error -5 recovering block 1720 in log [ 27.170000] JBD2: Failed to read block at offset 1721 [ 27.170000] JBD2: IO error -5 recovering block 1721 in log [ 27.180000] JBD2: Failed to read block at offset 1722 [ 27.180000] JBD2: IO error -5 recovering block 1722 in log [ 27.190000] JBD2: Failed to read block at offset 1723 [ 27.190000] JBD2: IO error -5 recovering block 1723 in log [ 27.200000] JBD2: Failed to read block at offset 1724 [ 27.200000] JBD2: IO error -5 recovering block 1724 in log [ 27.210000] JBD2: Failed to read block at offset 1725 [ 27.210000] JBD2: IO error -5 recovering block 1725 in log [ 27.220000] JBD2: Failed to read block at offset 1726 [ 27.220000] JBD2: IO error -5 recovering block 1726 in log [ 27.230000] JBD2: Failed to read block at offset 1727 [ 27.240000] JBD2: IO error -5 recovering block 1727 in log [ 27.240000] JBD2: Failed to read block at offset 1728 [ 27.250000] JBD2: IO error -5 recovering block 1728 in log [ 27.250000] JBD2: Failed to read block at offset 1729 [ 27.260000] JBD2: IO error -5 recovering block 1729 in log [ 27.260000] JBD2: Failed to read block at offset 1730 [ 27.270000] JBD2: IO error -5 recovering block 1730 in log [ 27.270000] JBD2: Failed to read block at offset 1731 [ 27.280000] JBD2: IO error -5 recovering block 1731 in log [ 27.280000] JBD2: Failed to read block at offset 1732 [ 27.290000] JBD2: IO error -5 recovering block 1732 in log [ 27.290000] JBD2: Failed to read block at offset 1733 [ 27.300000] JBD2: IO error -5 recovering block 1733 in log [ 27.300000] JBD2: Failed to read block at offset 1734 [ 27.310000] JBD2: IO error -5 recovering block 1734 in log [ 27.310000] JBD2: Failed to read block at offset 1735 [ 27.320000] JBD2: IO error -5 recovering block 1735 in log [ 27.320000] JBD2: Failed to read block at offset 1736 [ 27.330000] JBD2: IO error -5 recovering block 1736 in log [ 27.340000] JBD2: Failed to read block at offset 1737 [ 27.340000] JBD2: IO error -5 recovering block 1737 in log [ 27.350000] JBD2: Failed to read block at offset 1738 [ 27.350000] JBD2: IO error -5 recovering block 1738 in log [ 27.360000] JBD2: Failed to read block at offset 1739 [ 27.360000] JBD2: IO error -5 recovering block 1739 in log [ 27.370000] JBD2: Failed to read block at offset 1740 [ 27.370000] JBD2: IO error -5 recovering block 1740 in log [ 27.380000] JBD2: Failed to read block at offset 1741 [ 27.380000] JBD2: IO error -5 recovering block 1741 in log [ 27.390000] JBD2: Failed to read block at offset 1742 [ 27.390000] JBD2: IO error -5 recovering block 1742 in log [ 27.400000] JBD2: Failed to read block at offset 1743 [ 27.400000] JBD2: IO error -5 recovering block 1743 in log [ 27.410000] JBD2: Failed to read block at offset 1744 [ 27.410000] JBD2: IO error -5 recovering block 1744 in log [ 27.420000] JBD2: Failed to read block at offset 1745 [ 27.420000] JBD2: IO error -5 recovering block 1745 in log [ 27.430000] JBD2: Failed to read block at offset 1746 [ 27.430000] JBD2: IO error -5 recovering block 1746 in log [ 27.440000] JBD2: Failed to read block at offset 1747 [ 27.450000] JBD2: IO error -5 recovering block 1747 in log [ 27.450000] JBD2: Failed to read block at offset 1748 [ 27.460000] JBD2: IO error -5 recovering block 1748 in log [ 27.460000] JBD2: Failed to read block at offset 1749 [ 27.470000] JBD2: IO error -5 recovering block 1749 in log [ 27.470000] JBD2: Failed to read block at offset 1750 [ 27.480000] JBD2: IO error -5 recovering block 1750 in log [ 27.480000] JBD2: Failed to read block at offset 1751 [ 27.490000] JBD2: IO error -5 recovering block 1751 in log [ 27.490000] JBD2: Failed to read block at offset 1752 [ 27.500000] JBD2: IO error -5 recovering block 1752 in log [ 27.530000] JBD2: Failed to read block at offset 1785 [ 27.530000] JBD2: IO error -5 recovering block 1785 in log [ 27.540000] JBD2: Failed to read block at offset 1786 [ 27.540000] JBD2: IO error -5 recovering block 1786 in log [ 27.550000] JBD2: Failed to read block at offset 1787 [ 27.550000] JBD2: IO error -5 recovering block 1787 in log [ 27.560000] JBD2: Failed to read block at offset 1788 [ 27.560000] JBD2: IO error -5 recovering block 1788 in log [ 27.570000] JBD2: Failed to read block at offset 1789 [ 27.570000] JBD2: IO error -5 recovering block 1789 in log [ 27.580000] JBD2: Failed to read block at offset 1790 [ 27.580000] JBD2: IO error -5 recovering block 1790 in log [ 27.590000] JBD2: Failed to read block at offset 1791 [ 27.600000] JBD2: IO error -5 recovering block 1791 in log [ 27.600000] JBD2: Failed to read block at offset 1792 [ 27.610000] JBD2: IO error -5 recovering block 1792 in log [ 27.610000] JBD2: Failed to read block at offset 1793 [ 27.620000] JBD2: IO error -5 recovering block 1793 in log [ 27.620000] JBD2: Failed to read block at offset 1794 [ 27.630000] JBD2: IO error -5 recovering block 1794 in log [ 27.630000] JBD2: Failed to read block at offset 1795 [ 27.640000] JBD2: IO error -5 recovering block 1795 in log [ 27.640000] JBD2: Failed to read block at offset 1796 [ 27.650000] JBD2: IO error -5 recovering block 1796 in log [ 27.650000] JBD2: Failed to read block at offset 1797 [ 27.660000] JBD2: IO error -5 recovering block 1797 in log [ 27.660000] JBD2: Failed to read block at offset 1798 [ 27.670000] JBD2: IO error -5 recovering block 1798 in log [ 27.670000] JBD2: Failed to read block at offset 1799 [ 27.680000] JBD2: IO error -5 recovering block 1799 in log [ 27.680000] JBD2: Failed to read block at offset 1800 [ 27.690000] JBD2: IO error -5 recovering block 1800 in log [ 27.700000] JBD2: Failed to read block at offset 1801 [ 27.700000] JBD2: IO error -5 recovering block 1801 in log [ 27.710000] JBD2: Failed to read block at offset 1802 [ 27.710000] JBD2: IO error -5 recovering block 1802 in log [ 27.720000] JBD2: Failed to read block at offset 1803 [ 27.720000] JBD2: IO error -5 recovering block 1803 in log [ 27.730000] JBD2: Failed to read block at offset 1804 [ 27.730000] JBD2: IO error -5 recovering block 1804 in log [ 27.740000] JBD2: Failed to read block at offset 1805 [ 27.740000] JBD2: IO error -5 recovering block 1805 in log [ 27.750000] JBD2: Failed to read block at offset 1806 [ 27.750000] JBD2: IO error -5 recovering block 1806 in log [ 27.760000] JBD2: Failed to read block at offset 1807 [ 27.760000] JBD2: IO error -5 recovering block 1807 in log [ 27.770000] JBD2: Failed to read block at offset 1808 [ 27.770000] JBD2: IO error -5 recovering block 1808 in log [ 27.780000] JBD2: Failed to read block at offset 1809 [ 27.780000] JBD2: IO error -5 recovering block 1809 in log [ 27.790000] JBD2: Failed to read block at offset 1810 [ 27.790000] JBD2: IO error -5 recovering block 1810 in log [ 27.800000] JBD2: Failed to read block at offset 1811 [ 27.810000] JBD2: IO error -5 recovering block 1811 in log [ 27.810000] JBD2: Failed to read block at offset 1812 [ 27.820000] JBD2: IO error -5 recovering block 1812 in log [ 27.820000] JBD2: Failed to read block at offset 1813 [ 27.830000] JBD2: IO error -5 recovering block 1813 in log [ 27.830000] JBD2: Failed to read block at offset 1814 [ 27.840000] JBD2: IO error -5 recovering block 1814 in log [ 27.840000] JBD2: Failed to read block at offset 1815 [ 27.850000] JBD2: IO error -5 recovering block 1815 in log [ 27.850000] JBD2: Failed to read block at offset 1816 [ 27.860000] JBD2: IO error -5 recovering block 1816 in log [ 27.860000] JBD2: Failed to read block at offset 1817 [ 27.870000] JBD2: IO error -5 recovering block 1817 in log [ 27.870000] JBD2: Failed to read block at offset 1818 [ 27.880000] JBD2: IO error -5 recovering block 1818 in log [ 27.880000] JBD2: Failed to read block at offset 1819 [ 27.890000] JBD2: IO error -5 recovering block 1819 in log [ 27.890000] JBD2: Failed to read block at offset 1820 [ 27.900000] JBD2: IO error -5 recovering block 1820 in log [ 27.910000] JBD2: Failed to read block at offset 1821 [ 27.910000] JBD2: IO error -5 recovering block 1821 in log [ 27.920000] JBD2: Failed to read block at offset 1822 [ 27.920000] JBD2: IO error -5 recovering block 1822 in log [ 27.930000] JBD2: Failed to read block at offset 1823 [ 27.930000] JBD2: IO error -5 recovering block 1823 in log [ 27.940000] JBD2: Failed to read block at offset 1824 [ 27.940000] JBD2: IO error -5 recovering block 1824 in log [ 27.950000] JBD2: Failed to read block at offset 1825 [ 27.950000] JBD2: IO error -5 recovering block 1825 in log [ 27.960000] JBD2: Failed to read block at offset 1826 [ 27.960000] JBD2: IO error -5 recovering block 1826 in log [ 27.970000] JBD2: Failed to read block at offset 1827 [ 27.970000] JBD2: IO error -5 recovering block 1827 in log [ 27.980000] JBD2: Failed to read block at offset 1828 [ 27.980000] JBD2: IO error -5 recovering block 1828 in log [ 27.990000] JBD2: Failed to read block at offset 1829 [ 27.990000] JBD2: IO error -5 recovering block 1829 in log [ 28.000000] JBD2: Failed to read block at offset 1830 [ 28.000000] JBD2: IO error -5 recovering block 1830 in log [ 28.010000] JBD2: Failed to read block at offset 1831 [ 28.020000] JBD2: IO error -5 recovering block 1831 in log [ 28.020000] JBD2: Failed to read block at offset 1832 [ 28.030000] JBD2: IO error -5 recovering block 1832 in log [ 28.030000] JBD2: Failed to read block at offset 1833 [ 28.040000] JBD2: IO error -5 recovering block 1833 in log [ 28.040000] JBD2: Failed to read block at offset 1834 [ 28.050000] JBD2: IO error -5 recovering block 1834 in log [ 28.050000] JBD2: Failed to read block at offset 1835 [ 28.060000] JBD2: IO error -5 recovering block 1835 in log [ 28.060000] JBD2: Failed to read block at offset 1836 [ 28.070000] JBD2: IO error -5 recovering block 1836 in log [ 28.070000] JBD2: Failed to read block at offset 1837 [ 28.080000] JBD2: IO error -5 recovering block 1837 in log [ 28.080000] JBD2: Failed to read block at offset 1838 [ 28.090000] JBD2: IO error -5 recovering block 1838 in log [ 28.090000] JBD2: Failed to read block at offset 1839 [ 28.100000] JBD2: IO error -5 recovering block 1839 in log [ 28.100000] JBD2: Failed to read block at offset 1840 [ 28.110000] JBD2: IO error -5 recovering block 1840 in log [ 28.120000] JBD2: Failed to read block at offset 1841 [ 28.120000] JBD2: IO error -5 recovering block 1841 in log [ 28.130000] JBD2: Failed to read block at offset 1842 [ 28.130000] JBD2: IO error -5 recovering block 1842 in log [ 28.140000] JBD2: Failed to read block at offset 1843 [ 28.140000] JBD2: IO error -5 recovering block 1843 in log [ 28.150000] JBD2: Failed to read block at offset 1844 [ 28.150000] JBD2: IO error -5 recovering block 1844 in log [ 28.160000] JBD2: Failed to read block at offset 1845 [ 28.160000] JBD2: IO error -5 recovering block 1845 in log [ 28.170000] JBD2: Failed to read block at offset 1846 [ 28.170000] JBD2: IO error -5 recovering block 1846 in log [ 28.180000] JBD2: Failed to read block at offset 1847 [ 28.180000] JBD2: IO error -5 recovering block 1847 in log [ 28.190000] JBD2: Failed to read block at offset 1848 [ 28.190000] JBD2: IO error -5 recovering block 1848 in log [ 28.200000] JBD2: Failed to read block at offset 1849 [ 28.200000] JBD2: IO error -5 recovering block 1849 in log [ 28.210000] JBD2: Failed to read block at offset 1850 [ 28.210000] JBD2: IO error -5 recovering block 1850 in log [ 28.220000] JBD2: Failed to read block at offset 1851 [ 28.230000] JBD2: IO error -5 recovering block 1851 in log [ 28.230000] JBD2: Failed to read block at offset 1852 [ 28.240000] JBD2: IO error -5 recovering block 1852 in log [ 28.240000] JBD2: Failed to read block at offset 1853 [ 28.250000] JBD2: IO error -5 recovering block 1853 in log [ 28.250000] JBD2: Failed to read block at offset 1854 [ 28.260000] JBD2: IO error -5 recovering block 1854 in log [ 28.260000] JBD2: Failed to read block at offset 1855 [ 28.270000] JBD2: IO error -5 recovering block 1855 in log [ 28.270000] JBD2: Failed to read block at offset 1856 [ 28.280000] JBD2: IO error -5 recovering block 1856 in log [ 28.280000] JBD2: Failed to read block at offset 1857 [ 28.290000] JBD2: IO error -5 recovering block 1857 in log [ 28.290000] JBD2: Failed to read block at offset 1858 [ 28.300000] JBD2: IO error -5 recovering block 1858 in log [ 28.300000] JBD2: Failed to read block at offset 1859 [ 28.310000] JBD2: IO error -5 recovering block 1859 in log [ 28.310000] JBD2: Failed to read block at offset 1860 [ 28.320000] JBD2: IO error -5 recovering block 1860 in log [ 28.330000] JBD2: Failed to read block at offset 1861 [ 28.330000] JBD2: IO error -5 recovering block 1861 in log [ 28.340000] JBD2: Failed to read block at offset 1862 [ 28.340000] JBD2: IO error -5 recovering block 1862 in log [ 28.350000] JBD2: Failed to read block at offset 1863 [ 28.350000] JBD2: IO error -5 recovering block 1863 in log [ 28.360000] JBD2: Failed to read block at offset 1864 [ 28.360000] JBD2: IO error -5 recovering block 1864 in log [ 28.370000] JBD2: Failed to read block at offset 1865 [ 28.370000] JBD2: IO error -5 recovering block 1865 in log [ 28.380000] JBD2: Failed to read block at offset 1866 [ 28.380000] JBD2: IO error -5 recovering block 1866 in log [ 28.390000] JBD2: Failed to read block at offset 1867 [ 28.390000] JBD2: IO error -5 recovering block 1867 in log [ 28.400000] JBD2: Failed to read block at offset 1868 [ 28.400000] JBD2: IO error -5 recovering block 1868 in log [ 28.410000] JBD2: Failed to read block at offset 1869 [ 28.410000] JBD2: IO error -5 recovering block 1869 in log [ 28.420000] JBD2: Failed to read block at offset 1870 [ 28.420000] JBD2: IO error -5 recovering block 1870 in log [ 28.430000] JBD2: Failed to read block at offset 1871 [ 28.440000] JBD2: IO error -5 recovering block 1871 in log [ 28.440000] JBD2: Failed to read block at offset 1872 [ 28.450000] JBD2: IO error -5 recovering block 1872 in log [ 28.450000] JBD2: Failed to read block at offset 1873 [ 28.460000] JBD2: IO error -5 recovering block 1873 in log [ 28.460000] JBD2: Failed to read block at offset 1874 [ 28.470000] JBD2: IO error -5 recovering block 1874 in log [ 28.470000] JBD2: Failed to read block at offset 1875 [ 28.480000] JBD2: IO error -5 recovering block 1875 in log [ 28.480000] JBD2: Failed to read block at offset 1876 [ 28.490000] JBD2: IO error -5 recovering block 1876 in log [ 28.490000] JBD2: Failed to read block at offset 1877 [ 28.500000] JBD2: IO error -5 recovering block 1877 in log [ 28.500000] JBD2: Failed to read block at offset 1878 [ 28.510000] JBD2: IO error -5 recovering block 1878 in log [ 28.510000] JBD2: Failed to read block at offset 1879 [ 28.520000] JBD2: IO error -5 recovering block 1879 in log [ 28.520000] JBD2: Failed to read block at offset 1880 [ 28.530000] JBD2: IO error -5 recovering block 1880 in log [ 28.540000] JBD2: Failed to read block at offset 1881 [ 28.540000] JBD2: IO error -5 recovering block 1881 in log [ 28.550000] JBD2: Failed to read block at offset 1882 [ 28.550000] JBD2: IO error -5 recovering block 1882 in log [ 28.560000] JBD2: Failed to read block at offset 1883 [ 28.560000] JBD2: IO error -5 recovering block 1883 in log [ 28.570000] JBD2: Failed to read block at offset 1884 [ 28.570000] JBD2: IO error -5 recovering block 1884 in log [ 28.580000] JBD2: Failed to read block at offset 1885 [ 28.580000] JBD2: IO error -5 recovering block 1885 in log [ 28.590000] JBD2: Failed to read block at offset 1886 [ 28.590000] JBD2: IO error -5 recovering block 1886 in log [ 28.600000] JBD2: Failed to read block at offset 1887 [ 28.600000] JBD2: IO error -5 recovering block 1887 in log [ 28.610000] JBD2: Failed to read block at offset 1888 [ 28.610000] JBD2: IO error -5 recovering block 1888 in log [ 28.620000] JBD2: Failed to read block at offset 1889 [ 28.620000] JBD2: IO error -5 recovering block 1889 in log [ 28.630000] JBD2: Failed to read block at offset 1890 [ 28.630000] JBD2: IO error -5 recovering block 1890 in log [ 28.640000] JBD2: Failed to read block at offset 1891 [ 28.650000] JBD2: IO error -5 recovering block 1891 in log [ 28.650000] JBD2: Failed to read block at offset 1892 [ 28.660000] JBD2: IO error -5 recovering block 1892 in log [ 28.660000] JBD2: Failed to read block at offset 1893 [ 28.670000] JBD2: IO error -5 recovering block 1893 in log [ 28.670000] JBD2: Failed to read block at offset 1894 [ 28.680000] JBD2: IO error -5 recovering block 1894 in log [ 28.680000] JBD2: Failed to read block at offset 1895 [ 28.690000] JBD2: IO error -5 recovering block 1895 in log [ 28.690000] JBD2: Failed to read block at offset 1896 [ 28.700000] JBD2: IO error -5 recovering block 1896 in log [ 28.700000] JBD2: Failed to read block at offset 1897 [ 28.710000] JBD2: IO error -5 recovering block 1897 in log [ 28.710000] JBD2: Failed to read block at offset 1898 [ 28.720000] JBD2: IO error -5 recovering block 1898 in log [ 28.720000] JBD2: Failed to read block at offset 1899 [ 28.730000] JBD2: IO error -5 recovering block 1899 in log [ 28.730000] JBD2: Failed to read block at offset 1900 [ 28.740000] JBD2: IO error -5 recovering block 1900 in log [ 28.750000] JBD2: Failed to read block at offset 1901 [ 28.750000] JBD2: IO error -5 recovering block 1901 in log [ 28.760000] JBD2: Failed to read block at offset 1902 [ 28.760000] JBD2: IO error -5 recovering block 1902 in log [ 28.770000] JBD2: Failed to read block at offset 1903 [ 28.770000] JBD2: IO error -5 recovering block 1903 in log [ 28.780000] JBD2: Failed to read block at offset 1904 [ 28.780000] JBD2: IO error -5 recovering block 1904 in log [ 28.790000] JBD2: Failed to read block at offset 1905 [ 28.790000] JBD2: IO error -5 recovering block 1905 in log [ 28.800000] JBD2: Failed to read block at offset 1906 [ 28.800000] JBD2: IO error -5 recovering block 1906 in log [ 28.810000] JBD2: Failed to read block at offset 1907 [ 28.810000] JBD2: IO error -5 recovering block 1907 in log [ 28.820000] JBD2: Failed to read block at offset 1908 [ 28.820000] JBD2: IO error -5 recovering block 1908 in log [ 28.830000] JBD2: Failed to read block at offset 1909 [ 28.830000] JBD2: IO error -5 recovering block 1909 in log [ 28.840000] JBD2: Failed to read block at offset 1910 [ 28.850000] JBD2: IO error -5 recovering block 1910 in log [ 28.850000] JBD2: Failed to read block at offset 1911 [ 28.860000] JBD2: IO error -5 recovering block 1911 in log [ 28.860000] JBD2: Failed to read block at offset 1912 [ 28.870000] JBD2: IO error -5 recovering block 1912 in log [ 28.870000] JBD2: Failed to read block at offset 1913 [ 28.880000] JBD2: IO error -5 recovering block 1913 in log [ 28.880000] JBD2: Failed to read block at offset 1914 [ 28.890000] JBD2: IO error -5 recovering block 1914 in log [ 28.890000] JBD2: Failed to read block at offset 1915 [ 28.900000] JBD2: IO error -5 recovering block 1915 in log [ 28.900000] JBD2: Failed to read block at offset 1916 [ 28.910000] JBD2: IO error -5 recovering block 1916 in log [ 28.910000] JBD2: Failed to read block at offset 1917 [ 28.920000] JBD2: IO error -5 recovering block 1917 in log [ 28.920000] JBD2: Failed to read block at offset 1918 [ 28.930000] JBD2: IO error -5 recovering block 1918 in log [ 28.930000] JBD2: Failed to read block at offset 1919 [ 28.940000] JBD2: IO error -5 recovering block 1919 in log [ 28.950000] JBD2: Failed to read block at offset 1920 [ 28.950000] JBD2: IO error -5 recovering block 1920 in log [ 28.960000] JBD2: Failed to read block at offset 1921 [ 28.960000] JBD2: IO error -5 recovering block 1921 in log [ 29.420000] device eth0 entered promiscuous mode [ 30.090000] JBD2: Failed to read block at offset 1954 [ 30.090000] JBD2: IO error -5 recovering block 1954 in log [ 30.100000] JBD2: Failed to read block at offset 1955 [ 30.100000] JBD2: IO error -5 recovering block 1955 in log [ 30.110000] JBD2: Failed to read block at offset 1956 [ 30.110000] JBD2: IO error -5 recovering block 1956 in log [ 30.120000] JBD2: Failed to read block at offset 1957 [ 30.120000] JBD2: IO error -5 recovering block 1957 in log [ 30.130000] JBD2: Failed to read block at offset 1958 [ 30.130000] JBD2: IO error -5 recovering block 1958 in log [ 30.140000] JBD2: Failed to read block at offset 1959 [ 30.140000] JBD2: IO error -5 recovering block 1959 in log [ 30.150000] JBD2: Failed to read block at offset 1960 [ 30.150000] JBD2: IO error -5 recovering block 1960 in log [ 30.160000] JBD2: Failed to read block at offset 1961 [ 30.170000] JBD2: IO error -5 recovering block 1961 in log [ 30.170000] JBD2: Failed to read block at offset 1962 [ 30.180000] JBD2: IO error -5 recovering block 1962 in log [ 30.180000] JBD2: Failed to read block at offset 1963 [ 30.190000] JBD2: IO error -5 recovering block 1963 in log [ 30.190000] JBD2: Failed to read block at offset 1964 [ 30.200000] JBD2: IO error -5 recovering block 1964 in log [ 30.200000] JBD2: Failed to read block at offset 1965 [ 30.210000] JBD2: IO error -5 recovering block 1965 in log [ 30.210000] JBD2: Failed to read block at offset 1966 [ 30.220000] JBD2: IO error -5 recovering block 1966 in log [ 30.220000] JBD2: Failed to read block at offset 1967 [ 30.230000] JBD2: IO error -5 recovering block 1967 in log [ 30.230000] JBD2: Failed to read block at offset 1968 [ 30.240000] JBD2: IO error -5 recovering block 1968 in log [ 30.240000] JBD2: Failed to read block at offset 1969 [ 30.250000] JBD2: IO error -5 recovering block 1969 in log [ 30.250000] JBD2: Failed to read block at offset 1970 [ 30.260000] JBD2: IO error -5 recovering block 1970 in log [ 30.270000] JBD2: Failed to read block at offset 1971 [ 30.270000] JBD2: IO error -5 recovering block 1971 in log [ 30.280000] JBD2: Failed to read block at offset 1972 [ 30.280000] JBD2: IO error -5 recovering block 1972 in log [ 30.290000] JBD2: Failed to read block at offset 1973 [ 30.290000] JBD2: IO error -5 recovering block 1973 in log [ 30.300000] JBD2: Failed to read block at offset 1974 [ 30.300000] JBD2: IO error -5 recovering block 1974 in log [ 30.310000] JBD2: Failed to read block at offset 1975 [ 30.310000] JBD2: IO error -5 recovering block 1975 in log [ 30.320000] JBD2: Failed to read block at offset 1976 [ 30.320000] JBD2: IO error -5 recovering block 1976 in log [ 30.330000] JBD2: Failed to read block at offset 1977 [ 30.330000] JBD2: IO error -5 recovering block 1977 in log [ 30.340000] JBD2: Failed to read block at offset 1978 [ 30.340000] JBD2: IO error -5 recovering block 1978 in log [ 30.350000] JBD2: Failed to read block at offset 1979 [ 30.350000] JBD2: IO error -5 recovering block 1979 in log [ 30.360000] JBD2: Failed to read block at offset 1980 [ 30.360000] JBD2: IO error -5 recovering block 1980 in log [ 30.370000] JBD2: Failed to read block at offset 1981 [ 30.380000] JBD2: IO error -5 recovering block 1981 in log [ 30.380000] JBD2: Failed to read block at offset 1982 [ 30.390000] JBD2: IO error -5 recovering block 1982 in log [ 30.390000] JBD2: Failed to read block at offset 1983 [ 30.400000] JBD2: IO error -5 recovering block 1983 in log [ 30.400000] JBD2: Failed to read block at offset 1984 [ 30.410000] JBD2: IO error -5 recovering block 1984 in log [ 30.410000] JBD2: Failed to read block at offset 1985 [ 30.420000] JBD2: IO error -5 recovering block 1985 in log [ 30.420000] JBD2: Failed to read block at offset 1986 [ 30.430000] JBD2: IO error -5 recovering block 1986 in log [ 30.430000] JBD2: Failed to read block at offset 1987 [ 30.440000] JBD2: IO error -5 recovering block 1987 in log [ 30.440000] JBD2: Failed to read block at offset 1988 [ 30.450000] JBD2: IO error -5 recovering block 1988 in log [ 30.450000] JBD2: Failed to read block at offset 1989 [ 30.460000] JBD2: IO error -5 recovering block 1989 in log [ 30.460000] JBD2: Failed to read block at offset 1990 [ 30.470000] JBD2: IO error -5 recovering block 1990 in log [ 30.480000] JBD2: Failed to read block at offset 1991 [ 30.480000] JBD2: IO error -5 recovering block 1991 in log [ 30.490000] JBD2: Failed to read block at offset 1992 [ 30.490000] JBD2: IO error -5 recovering block 1992 in log [ 30.500000] JBD2: Failed to read block at offset 1993 [ 30.500000] JBD2: IO error -5 recovering block 1993 in log [ 30.510000] JBD2: Failed to read block at offset 1994 [ 30.510000] JBD2: IO error -5 recovering block 1994 in log [ 30.520000] JBD2: Failed to read block at offset 1995 [ 30.520000] JBD2: IO error -5 recovering block 1995 in log [ 30.530000] JBD2: Failed to read block at offset 1996 [ 30.530000] JBD2: IO error -5 recovering block 1996 in log [ 30.540000] JBD2: Failed to read block at offset 1997 [ 30.540000] JBD2: IO error -5 recovering block 1997 in log [ 30.550000] JBD2: Failed to read block at offset 1998 [ 30.550000] JBD2: IO error -5 recovering block 1998 in log [ 30.560000] JBD2: Failed to read block at offset 1999 [ 30.560000] JBD2: IO error -5 recovering block 1999 in log [ 30.570000] JBD2: Failed to read block at offset 2000 [ 30.570000] JBD2: IO error -5 recovering block 2000 in log [ 30.580000] JBD2: Failed to read block at offset 2001 [ 30.590000] JBD2: IO error -5 recovering block 2001 in log [ 30.590000] JBD2: Failed to read block at offset 2002 [ 30.600000] JBD2: IO error -5 recovering block 2002 in log [ 30.600000] JBD2: Failed to read block at offset 2003 [ 30.610000] JBD2: IO error -5 recovering block 2003 in log [ 30.610000] JBD2: Failed to read block at offset 2004 [ 30.620000] JBD2: IO error -5 recovering block 2004 in log [ 30.620000] JBD2: Failed to read block at offset 2005 [ 30.630000] JBD2: IO error -5 recovering block 2005 in log [ 30.630000] JBD2: Failed to read block at offset 2006 [ 30.640000] JBD2: IO error -5 recovering block 2006 in log [ 30.640000] JBD2: Failed to read block at offset 2007 [ 30.650000] JBD2: IO error -5 recovering block 2007 in log [ 30.650000] JBD2: Failed to read block at offset 2008 [ 30.660000] JBD2: IO error -5 recovering block 2008 in log [ 30.660000] JBD2: Failed to read block at offset 2009 [ 30.670000] JBD2: IO error -5 recovering block 2009 in log [ 30.670000] JBD2: Failed to read block at offset 2010 [ 30.680000] JBD2: IO error -5 recovering block 2010 in log [ 30.690000] JBD2: Failed to read block at offset 2011 [ 30.690000] JBD2: IO error -5 recovering block 2011 in log [ 32.150000] JBD2: Failed to read block at offset 2044 [ 32.150000] JBD2: IO error -5 recovering block 2044 in log [ 32.160000] JBD2: Failed to read block at offset 2045 [ 32.160000] JBD2: IO error -5 recovering block 2045 in log [ 32.170000] JBD2: Failed to read block at offset 2046 [ 32.170000] JBD2: IO error -5 recovering block 2046 in log [ 32.180000] JBD2: Failed to read block at offset 2047 [ 32.180000] JBD2: IO error -5 recovering block 2047 in log [ 32.190000] JBD2: Failed to read block at offset 2048 [ 32.190000] JBD2: IO error -5 recovering block 2048 in log [ 32.200000] JBD2: Failed to read block at offset 2049 [ 32.200000] JBD2: IO error -5 recovering block 2049 in log [ 32.620000] JBD2: recovery failed [ 32.620000] EXT4-fs (sda1): error loading journal [ 32.630000] ------------[ cut here ]------------ [ 32.640000] WARNING: CPU: 0 PID: 1378 at fs/block_dev.c:67 bdev_inode_switch_bdi+0x8c/0x98() [ 32.650000] Modules linked in: pppoe ppp_async option iptable_nat usb_wwan sierra_net rndis_host qmi_wwan pppox ppp_generic pl2303 nf_nat_ipv4 nf_conntrack_ipv4 iptable_raw iptable_mangle iptable_filter ipt_REJECT ipt_MASQUERADE ipt_ECN ip_tables cdc_ether ax88179_178a asix xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_id xt_hl xt_ecn xt_dscp xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_DSCP xt_CT xt_CLASSIFY x_tables usbserial usbnet ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda slhc nf_reject_ipv4 nf_nat_masquerade_ipv4 nf_nat_ftp nf_nat nf_log_ipv4 nf_log_common nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_ftp nf_conntrack crc_itu_t cdc_wdm cdc_acm sg nfsv3 nfs rtl8192cu rtl_usb rtl8192c_common rtlwifi rtl8187 rt2800usb rt2800lib rt2x00usb rt2x00lib crc_ccitt tun vfat fat lockd sunrpc grace ath9k_htc ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 compat nls_utf8 nls_iso8859_1 nls_cp437 eeprom_93cx6 arc4 crypto_blkcipher usb_storage uhci_hcd ohci_platform ohci_hcd ehci_platform ehci_hcd sd_mod scsi_mod gpio_button_hotplug ext4 jbd2 mbcache usbcore nls_base usb_common crc16 mii aead crypto_hash [ 32.760000] CPU: 0 PID: 1378 Comm: mount Not tainted 3.18.36 #40 [ 32.760000] Stack : 00000000 00000000 00000000 00000000 803b4292 00000034 00000000 8012a2f8 [ 32.760000] 00000001 83404d10 802ffa20 803565e3 00000562 803b34d0 82a3c720 83404d10 [ 32.760000] 00000083 80362a30 8030a354 800a35b4 00000003 80080410 00000043 83404d10 [ 32.760000] 80303050 82a81cb4 00000000 00000000 00000000 00000000 00000000 00000000 [ 32.760000] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 32.760000] ... [ 32.800000] Call Trace: [ 32.800000] [<80071038>] show_stack+0x50/0x84 [ 32.800000] [<80080518>] warn_slowpath_common+0x84/0xb4 [ 32.810000] [<800805d0>] warn_slowpath_null+0x18/0x24 [ 32.810000] [<8012a2f8>] bdev_inode_switch_bdi+0x8c/0x98 [ 32.820000] [<8012b010>] __blkdev_put+0xc0/0x180 [ 32.820000] [<800fdca4>] deactivate_locked_super+0x50/0x88 [ 32.830000] [<800fe8a0>] mount_bdev+0x15c/0x1d0 [ 32.830000] [<82c17c88>] ext4_orphan_del+0x1080/0x1f1c [ext4] [ 32.840000] [<8011651c>] vfs_kern_mount+0x64/0x114 [ 32.840000] [<8011943c>] do_mount+0x9a0/0xab0 [ 32.850000] [<801197d0>] SyS_mount+0x90/0xd4 [ 32.850000] [<80062b5c>] handle_sys+0x11c/0x140 [ 32.860000] [ 32.860000] ---[ end trace 34386a0f0d5c01ef ]--- [ 33.450000] usb 1-1.2: new high-speed USB device number 6 using ehci-platform [ 33.950000] eth0: link up (100Mbps/Full duplex) [ 33.950000] br-lan: port 1(eth0) entered forwarding state [ 33.960000] br-lan: port 1(eth0) entered forwarding state [ 34.040000] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 34.080000] scsi host2: usb-storage 1-1.2:1.0 [ 35.080000] scsi 2:0:0:0: Direct-Access Generic STORAGE DEVICE 0933 PQ: 0 ANSI: 6 [ 35.090000] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 35.680000] sd 2:0:0:0: [sda] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB) [ 35.960000] br-lan: port 1(eth0) entered forwarding state [ 36.290000] device wlan0 entered promiscuous mode [ 36.390000] br-lan: port 2(wlan0) entered forwarding state [ 36.400000] br-lan: port 2(wlan0) entered forwarding state [ 36.470000] device wlan0-1 entered promiscuous mode [ 36.500000] br-lan: port 3(wlan0-1) entered forwarding state [ 36.500000] br-lan: port 3(wlan0-1) entered forwarding state [ 36.790000] sd 2:0:0:0: [sda] Write Protect is off [ 36.800000] sd 2:0:0:0: [sda] Mode Sense: 21 00 00 00 [ 36.840000] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 36.930000] sda: sda1 sda2 [ 36.940000] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 37.210000] br-lan: port 3(wlan0-1) entered disabled state [ 38.110000] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ 38.120000] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities [ 38.400000] br-lan: port 2(wlan0) entered forwarding state [ 38.870000] EXT4-fs (sda1): recovery complete [ 38.870000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 39.070000] br-lan: port 3(wlan0-1) entered forwarding state [ 39.080000] br-lan: port 3(wlan0-1) entered forwarding state [ 41.080000] br-lan: port 3(wlan0-1) entered forwarding state [ 45.090000] usb 1-1.2: USB disconnect, device number 6 [ 45.110000] sd 2:0:0:0: [sda] [ 45.110000] Result: hostbyte=0x01 driverbyte=0x00 [ 45.110000] sd 2:0:0:0: [sda] CDB: [ 45.120000] cdb[0]=0x28: 28 00 00 1e a4 55 00 00 38 00 [ 45.120000] blk_update_request: I/O error, dev sda, sector 2008149 [ 48.140000] usb 1-1.2: new high-speed USB device number 7 using ehci-platform [ 48.280000] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 48.300000] scsi host3: usb-storage 1-1.2:1.0 [ 49.300000] scsi 3:0:0:0: Direct-Access Generic STORAGE DEVICE 0933 PQ: 0 ANSI: 6 [ 49.300000] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 49.710000] sd 3:0:0:0: [sdb] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB) [ 49.720000] sd 3:0:0:0: [sdb] Write Protect is off [ 49.720000] sd 3:0:0:0: [sdb] Mode Sense: 21 00 00 00 [ 49.730000] sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 49.750000] sdb: sdb1 sdb2 [ 49.750000] sd 3:0:0:0: [sdb] Attached SCSI removable disk [ 50.100000] EXT4-fs (sdb1): couldn't mount as ext3 due to feature incompatibilities [ 50.110000] EXT4-fs (sdb1): couldn't mount as ext2 due to feature incompatibilities [ 50.150000] EXT4-fs (sdb1): recovery complete [ 50.160000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 50.350000] Adding 1004024k swap on /dev/sdcard/sd2. Priority:-1 extents:1 across:1004024k [ 160.760000] EXT4-fs error (device sdb1): ext4_mb_generate_buddy:757: group 193, block bitmap and bg descriptor inconsistent: 32743 vs 32764 free clusters [ 161.190000] usb 1-1.2: USB disconnect, device number 7 [ 161.200000] sd 3:0:0:0: [sdb] [ 161.200000] Result: hostbyte=0x01 driverbyte=0x00 [ 161.200000] sd 3:0:0:0: [sdb] CDB: [ 161.210000] cdb[0]=0x28: 28 00 02 e2 e7 7d 00 00 88 00 [ 161.210000] blk_update_request: I/O error, dev sdb, sector 48424829 [ 161.220000] Aborting journal on device sdb1-8. [ 161.220000] JBD2: Error -5 detected when updating journal superblock for sdb1-8. [ 161.450000] EXT4-fs error (device sdb1): ext4_find_entry:1289: inode #2: comm dnsmasq: reading directory lblock 0 [ 161.480000] EXT4-fs error (device sdb1): ext4_find_entry:1289: inode #1438984: comm launch-mana: reading directory lblock 0 [ 161.720000] EXT4-fs error (device sdb1): ext4_find_entry:1289: inode #1438977: comm launch-mana: reading directory lblock 0 [ 161.800000] EXT4-fs error (device sdb1): ext4_find_entry:1289: inode #2: comm launch-mana: reading directory lblock 0 [ 161.990000] EXT4-fs error (device sdb1): ext4_find_entry:1289: inode #2: comm launch-mana: reading directory lblock 0 [ 161.990000] EXT4-fs error (device sdb1): ext4_find_entry:1289: inode #1438977: comm launch-mana: reading directory lblock 0 [ 162.190000] EXT4-fs error (device sdb1): ext4_find_entry:1289: inode #1438984: comm launch-mana: reading directory lblock 0 [ 163.410000] EXT4-fs error (device sdb1): ext4_find_entry:1289: inode #1438977: comm python: reading directory lblock 0 [ 164.360000] usb 1-1.2: new high-speed USB device number 8 using ehci-platform [ 164.500000] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 164.520000] scsi host4: usb-storage 1-1.2:1.0 [ 165.520000] scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE 0933 PQ: 0 ANSI: 6 [ 165.520000] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 165.940000] sd 4:0:0:0: [sda] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB) [ 165.940000] sd 4:0:0:0: [sda] Write Protect is off [ 165.950000] sd 4:0:0:0: [sda] Mode Sense: 21 00 00 00 [ 165.950000] sd 4:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 165.970000] sda: sda1 sda2 [ 165.980000] sd 4:0:0:0: [sda] Attached SCSI removable disk [ 166.410000] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ 166.430000] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities [ 166.500000] EXT4-fs (sda1): recovery complete [ 166.510000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 166.700000] Adding 1004024k swap on /dev/sdcard/sd2. Priority:-2 extents:1 across:1004024k root@Pineapple:~# logread: Thu Apr 13 21:46:33 2017 daemon.err block: failed to swapoff /dev/sdcard/sd2 (-1) Thu Apr 13 21:46:33 2017 kern.info kernel: [ 50.350000] Adding 1004024k swap on /dev/sdcard/sd2. Priority:-1 extents:1 across:1004024k Thu Apr 13 23:48:02 2017 cron.err crond[1284]: time disparity of 121 minutes detected Thu Apr 13 23:48:17 2017 auth.err sshd[2359]: error: Could not load host key: /etc/ssh/ssh_host_ecdsa_key Thu Apr 13 23:48:17 2017 auth.err sshd[2359]: error: Could not load host key: /etc/ssh/ssh_host_ed25519_key Thu Apr 13 23:48:21 2017 auth.info sshd[2359]: Accepted password for root from 172.16.42.42 port 57120 ssh2 Thu Apr 13 23:48:26 2017 kern.crit kernel: [ 160.760000] EXT4-fs error (device sdb1): ext4_mb_generate_buddy:757: group 193, block bitmap and bg descriptor inconsistent: 32743 vs 32764 free clusters Thu Apr 13 23:48:26 2017 kern.info kernel: [ 161.190000] usb 1-1.2: USB disconnect, device number 7 Thu Apr 13 23:48:26 2017 kern.info kernel: [ 161.200000] sd 3:0:0:0: [sdb] Thu Apr 13 23:48:26 2017 kern.warn kernel: [ 161.200000] Result: hostbyte=0x01 driverbyte=0x00 Thu Apr 13 23:48:26 2017 kern.info kernel: [ 161.200000] sd 3:0:0:0: [sdb] CDB: Thu Apr 13 23:48:26 2017 kern.warn kernel: [ 161.210000] cdb[0]=0x28: 28 00 02 e2 e7 7d 00 00 88 00 Thu Apr 13 23:48:26 2017 kern.err kernel: [ 161.210000] blk_update_request: I/O error, dev sdb, sector 48424829 Thu Apr 13 23:48:26 2017 kern.err kernel: [ 161.220000] Aborting journal on device sdb1-8. Thu Apr 13 23:48:26 2017 kern.err kernel: [ 161.220000] JBD2: Error -5 detected when updating journal superblock for sdb1-8. Thu Apr 13 23:48:26 2017 daemon.info dnsmasq[1878]: exiting on receipt of SIGTERM Thu Apr 13 23:48:26 2017 kern.crit kernel: [ 161.450000] EXT4-fs error (device sdb1): ext4_find_entry:1289: inode #2: comm dnsmasq: reading directory lblock 0 Thu Apr 13 23:48:26 2017 daemon.crit dnsmasq[2430]: cannot read /sd/etc/mana-toolkit/dnsmasq-dhcpd.conf: No such file or directory Thu Apr 13 23:48:26 2017 daemon.crit dnsmasq[2430]: FAILED to start up Thu Apr 13 23:48:26 2017 kern.crit kernel: [ 161.480000] EXT4-fs error (device sdb1): ext4_find_entry:1289: inode #1438984: comm launch-mana: reading directory lblock 0 Thu Apr 13 23:48:27 2017 kern.crit kernel: [ 161.720000] EXT4-fs error (device sdb1): ext4_find_entry:1289: inode #1438977: comm launch-mana: reading directory lblock 0 Thu Apr 13 23:48:27 2017 kern.crit kernel: [ 161.800000] EXT4-fs error (device sdb1): ext4_find_entry:1289: inode #2: comm launch-mana: reading directory lblock 0 Thu Apr 13 23:48:27 2017 kern.crit kernel: [ 161.990000] EXT4-fs error (device sdb1): ext4_find_entry:1289: inode #2: comm launch-mana: reading directory lblock 0 Thu Apr 13 23:48:27 2017 kern.crit kernel: [ 161.990000] EXT4-fs error (device sdb1): ext4_find_entry:1289: inode #1438977: comm launch-mana: reading directory lblock 0 Thu Apr 13 23:48:27 2017 kern.crit kernel: [ 162.190000] EXT4-fs error (device sdb1): ext4_find_entry:1289: inode #1438984: comm launch-mana: reading directory lblock 0 Thu Apr 13 23:48:28 2017 kern.crit kernel: [ 163.410000] EXT4-fs error (device sdb1): ext4_find_entry:1289: inode #1438977: comm python: reading directory lblock 0 Thu Apr 13 23:48:29 2017 kern.info kernel: [ 164.360000] usb 1-1.2: new high-speed USB device number 8 using ehci-platform Thu Apr 13 23:48:29 2017 kern.info kernel: [ 164.500000] usb-storage 1-1.2:1.0: USB Mass Storage device detected Thu Apr 13 23:48:29 2017 kern.info kernel: [ 164.520000] scsi host4: usb-storage 1-1.2:1.0 Thu Apr 13 23:48:30 2017 kern.notice kernel: [ 165.520000] scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE 0933 PQ: 0 ANSI: 6 Thu Apr 13 23:48:30 2017 kern.notice kernel: [ 165.520000] sd 4:0:0:0: Attached scsi generic sg0 type 0 Thu Apr 13 23:48:31 2017 kern.notice kernel: [ 165.940000] sd 4:0:0:0: [sda] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB) Thu Apr 13 23:48:31 2017 kern.notice kernel: [ 165.940000] sd 4:0:0:0: [sda] Write Protect is off Thu Apr 13 23:48:31 2017 kern.debug kernel: [ 165.950000] sd 4:0:0:0: [sda] Mode Sense: 21 00 00 00 Thu Apr 13 23:48:31 2017 kern.notice kernel: [ 165.950000] sd 4:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA Thu Apr 13 23:48:31 2017 kern.info kernel: [ 165.970000] sda: sda1 sda2 Thu Apr 13 23:48:31 2017 kern.notice kernel: [ 165.980000] sd 4:0:0:0: [sda] Attached SCSI removable disk Thu Apr 13 23:48:31 2017 kern.err kernel: [ 166.410000] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities Thu Apr 13 23:48:31 2017 kern.err kernel: [ 166.430000] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities Thu Apr 13 23:48:31 2017 kern.info kernel: [ 166.500000] EXT4-fs (sda1): recovery complete Thu Apr 13 23:48:31 2017 kern.info kernel: [ 166.510000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) Thu Apr 13 23:48:31 2017 daemon.err block: failed to swapoff /dev/sdcard/sd2 (-1) Thu Apr 13 23:48:31 2017 kern.info kernel: [ 166.700000] Adding 1004024k swap on /dev/sdcard/sd2. Priority:-2 extents:1 across:1004024k Thu Apr 13 23:48:36 2017 daemon.info dnsmasq[2676]: started, version 2.73 cachesize 150 Thu Apr 13 23:48:36 2017 daemon.info dnsmasq[2676]: compile time options: no-IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify Thu Apr 13 23:48:36 2017 daemon.info dnsmasq[2676]: DNS service limited to local subnets Thu Apr 13 23:48:36 2017 daemon.info dnsmasq-dhcp[2676]: DHCP, IP range 172.16.42.100 -- 172.16.42.249, lease time 12h Thu Apr 13 23:48:36 2017 daemon.info dnsmasq[2676]: using local addresses only for domain lan Thu Apr 13 23:48:36 2017 daemon.info dnsmasq[2676]: reading /tmp/resolv.conf.auto Thu Apr 13 23:48:36 2017 daemon.info dnsmasq[2676]: using local addresses only for domain lan Thu Apr 13 23:48:36 2017 daemon.info dnsmasq[2676]: using nameserver 8.8.4.4#53 Thu Apr 13 23:48:36 2017 daemon.info dnsmasq[2676]: read /etc/hosts - 1 addresses Thu Apr 13 23:48:36 2017 daemon.info dnsmasq[2676]: read /tmp/hosts/dhcp - 1 addresses Thu Apr 13 23:48:36 2017 daemon.info dnsmasq-dhcp[2676]: read /etc/ethers - 0 addresses root@Pineapple:~#
  8. Awesome, thanks for the detailed response. I assumed as much with what I had mentioned but was curious of peoples implementations that went outside the scope of the Pineapple Wifi UI using the actual hardware / antennas for other things. I didn't think about the 3rd antenna to essentially route traffic to an AP that I was currently connected to, I will have to look up some hardware for that. The issues and trouble I have had trying to even get a client seem like they are coming from iOS and MacOS. I run this thing in my own home and guests connect to it just fine. However, when trying to use things like SSL Strip, Safari freaks out because of the HSTS protocols and wont even load stuff which makes 95% of all the sites and apps unusable. I saw a topic for MANA and I am installing it now to see if I can get that working. One big thing that I have learned so far that may help onlookers is that if you are using this at home, chances are your neighbors connections will be stronger and more trusted than that of your PineAP so they will probably not connect. Unless you are able to Deauth them enough to fall back on a public once they have associated with before that you are re-broadcasting, however I have been unsuccessful at that. Best use case I could think of would be out in a public place where no one is at their home/trusted wifi so the chances of them connecting to your AP is much greater, especially when it is throwing up SSID's for the probes their devices are sending out. Of course, I may be doing something wrong but in my first week of playing with it, thats the conclusion I have came up with so far. Would be great at a grocery store, Hotel, Airport, coffee shop etc. Keep in mind all the legal blah implications that could come with such thing but probably will have better results than trying to get nearby neighbors.
  9. I have some questions about taking this out in the field. I have a battery for my nano and an android phone. This phone however doesn't have service or a plan etc, I just use it for some specific Android Apps and Wifi. I am just looking for some ideas or uses for the nano that I might not be thinking of so I can see its potential and what others are doing. Here are the two basic ones I can think of: Scenario 1: Lets say I was asked to audit a network on a property where I couldn't draw any attention or look like I was up to no good. The only equipment I could have in my hand without looking shady would be a cellphone. I would hook up the Nano to my battery pack, put it in my backpack and then I assume connect to it via the management wifi AP? Since I can't tether (phone doesn't have a plan) I couldn't use PineAP because then those users that connect wouldn't have internet access and would just disconnect to look elsewhere. I'm guessing I could run things like Recon or Site Survey to get an idea of devices that may be around and connecting to things they shouldn't be etc. I could also SSH into the pineapple from my phone and run airodump to try and capture a handshake of the network as well to take offsite and crack if that was the intent. Scenario 2: The more traditional route would be going somewhere public, hooking up the pineapple and running PineAP in order to see the beacons being sent out and then re-broadcast to try and get some clients. Once getting clients, what are some things people like to do? Whether its MITM with malicious intent or just having fun and screwing with people, what are some things to do with a connected client? What types of apps do people use on their laptop or mobile phone in combination with their pineapple to make things easier for them? I have SSH on my phone with Wiggle for finding AP's but I am sure there is so much more. I guess in short I am just looking for what others have pulled off using their Nano's to see their potential. I haven't checked to see if there is a pre-sale forum or topic but understanding what people have done would be a good selling point.
  10. Thanks both, I didn't mean to sound hostile, was just trying to question the response for my own sanity :) I left the SD card intact and just reset the nano back to factory. It appears to be working now without issue. Seems like the golden fix with these things is just to factory reset when any issues arise. Issue resolved.
  11. Wouldn't the power be the same regardless of the OS? I have both male USB ends plugged into two USB slots on the laptop on the Y adapter. The other female end is connected to the nano itself. This setup worked fine when running it in Windows but it sounds like you are saying that a laptop in general cant put out enough power even when having both cables hooked up?
  12. The reason I noticed this was because I had PineAP running for about 2 hours before I tried to actually connect to one of the rebroadcast SSID's and it wouldn't let me connect to any of them which leads me to think there is an interface issue somewhere.
  13. When I first got my nano, I was using windows and everything worked great. I was able to use recon mode along with all the modules I was trying. Last night, I installed Kali on my machine and hooked up the nano to that. I have an ethernet cable plugged into the laptop and wifi turned off. When I run the wp6 shell script, it runs me through the the steps and it connects without issues. I can get to the Internet, the pineapple, and load bulletins just fine. The issue I am running into now is when I try and run "Recon Scan". I just keep getting "There was an error starting Recon. Please try again." Am I doing something wrong or have I forgot to do something in linux that is different than windows? Before I run the wp6 command: root@kali:~# ifconfig eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.10.65 netmask 255.255.255.0 broadcast 192.168.10.255 inet6 fe80::12e7:8a31:87f0:f5c9 prefixlen 64 scopeid 0x20<link> ether 78:45:c4:bc:6f:eb txqueuelen 1000 (Ethernet) RX packets 726 bytes 57522 (56.1 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 47 bytes 3680 (3.5 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 17 eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 ether 00:c0:ca:91:53:64 txqueuelen 1000 (Ethernet) RX packets 33 bytes 1608 (1.5 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 57 bytes 10218 (9.9 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1 (Local Loopback) RX packets 18 bytes 1058 (1.0 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 18 bytes 1058 (1.0 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 root@kali:~# After I run the wp6 command: eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.10.65 netmask 255.255.255.0 broadcast 192.168.10.255 inet6 fe80::12e7:8a31:87f0:f5c9 prefixlen 64 scopeid 0x20<link> ether 78:45:c4:bc:6f:eb txqueuelen 1000 (Ethernet) RX packets 1546 bytes 162801 (158.9 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 266 bytes 24704 (24.1 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 17 eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 172.16.42.42 netmask 255.255.255.0 broadcast 172.16.42.255 inet6 fe80::5ede:e6bd:c566:e226 prefixlen 64 scopeid 0x20<link> ether 00:c0:ca:91:53:64 txqueuelen 1000 (Ethernet) RX packets 848 bytes 584236 (570.5 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 778 bytes 163026 (159.2 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1 (Local Loopback) RX packets 20 bytes 1156 (1.1 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 20 bytes 1156 (1.1 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 root@kali:~# The networking section of the pineapple that is connected to the internet: br-lan Link encap:Ethernet HWaddr 00:C0:CA:91:3E:3B inet addr:172.16.42.1 Bcast:172.16.42.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:713 errors:0 dropped:7 overruns:0 frame:0 TX packets:789 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:135862 (132.6 KiB) TX bytes:580516 (566.9 KiB) eth0 Link encap:Ethernet HWaddr 00:C0:CA:91:3E:3B UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:713 errors:0 dropped:0 overruns:0 frame:0 TX packets:793 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:145844 (142.4 KiB) TX bytes:580700 (567.0 KiB) Interrupt:4 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:42 errors:0 dropped:0 overruns:0 frame:0 TX packets:42 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:3555 (3.4 KiB) TX bytes:3555 (3.4 KiB) wlan0 Link encap:Ethernet HWaddr 00:C0:CA:91:0E:92 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:29 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:3014 (2.9 KiB) wlan0-1 Link encap:Ethernet HWaddr 02:C0:CA:91:0E:92 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:25 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:2154 (2.1 KiB) wlan1mon Link encap:UNSPEC HWaddr 00-C0-CA-91-26-B2-00-44-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3894 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:940047 (918.0 KiB) TX bytes:0 (0.0 B) I went through the same steps when setting it up and can access the webui just fine. It seems though like an interface is being used or hasn't been started like it should have which is why recon mode isn't starting?
  14. I gave these commands a shot and ran into an error when trying to install the versions of reaver and bully you linked to. root@Pineapple:/sd# opkg install libpcap_1.8.1-1_ar71xx.ipk --dest sd Installing libpcap (1.8.1-1) to sd... Configuring libpcap. root@Pineapple:/sd# opkg install bully_1.1-31_ar71xx.ipk --dest sd Installing bully (1.1-31) to sd... Configuring bully. grep: /usr/lib/opkg/info/bully.control: No such file or directory cat: can't open '/usr/lib/opkg/info/bully.list': No such file or directory root@Pineapple:/sd# opkg install reaver_Big_endian-1_ar71xx.ipk --dest sd Installing reaver (Big_endian-1) to sd... Collected errors: * opkg_install_pkg: Package reaver sha256sum mismatch. Either the opkg or the package index are corrupt. Try 'opkg update'. * opkg_install_cmd: Cannot install package reaver. Any thoughts?
  15. I am trying to figure out how to get my nano into monitor mode so I can capture a simple handshake. I booted up the Nano and SSH'd into it. From here, I ran: airmon-ng start wlan1 The result I got back was: login as: root root@172.16.42.1's password: root@Pineapple:~# airmon-ng PHY Interface Driver Chipset phy0 wlan0 ath9k Not pci, usb, or sdio phy0 wlan0-1 ath9k Not pci, usb, or sdio phy1 wlan1 ath9k_htc Atheros Communications, Inc. AR9271 802. 11n root@Pineapple:~# airmon-ng start wlan1 Found 1 processes that could cause trouble. If airodump-ng, aireplay-ng or airtun-ng stops working after a short period of time, you may want to kill (some of) them! 2084 root 1376 S grep wpa_action\|wpa_supplicant\|wpa_cli\|dhclient\| PHY Interface Driver Chipset phy0 wlan0 ath9k Not pci, usb, or sdio phy0 wlan0-1 ath9k Not pci, usb, or sdio phy1 wlan1 ath9k_htc Atheros Communications, Inc. AR9271 802. 11n (mac80211 monitor mode vif enabled for [phy1]wlan1 on [phy1]wlan 1mon) (mac80211 station mode vif disabled for [phy1]wlan1) root@Pineapple:~# From everything I have seen and read with these tutorials, I expected to see something about mon0 as the interface being setup and running in monitor mode. As a test, I tried to run wash -i wlan1mon and didn't see any activity. I tried to run this same command on all of the above returned devices. What am I doing wrong?
×
×
  • Create New...