Jump to content

M@s0n

Active Members
  • Content Count

    11
  • Joined

  • Last visited

About M@s0n

  • Rank
    Hackling
  1. So I got everything working, But still having the same issue --> What is reproducible is WiFi Client Mode connected to internet the landing page works. If I disconnect WiFi client mode the landing page does not work, so I can't broadcast SSIDs from PineAP and have the landing page work (consistently). I believe that it may be a routing issue. Anybody come up with a fix for this ??
  2. Awesome! Thanks so much for the reply on my thread. This is exactly what I was looking for.
  3. Updated my question, sorry for the confusion.
  4. Hi everyone, I use the Wi-Fi pineapple as a man in the middle Device Redirecting all traffic to a Laptop That the Wi-Fi pineapple is tethered to, Similar to this setup: https://www.evilsocket.net/2016/09/15/WiFi-Pineapple-NANO-OS-X-and-BetterCap-setup/ So here's my setup, MacBook running linux VM (Virtual box) Connected via USB To the Wi-Fi pineapple That's sending all traffic To the virtual box Machine : Pardon my diagram skills :( Here describe that I have created Based off of the post Above, HoweverI don't think this is ideal since you would need to ssh into the pineapple to run this script every time. Ideally it would be best to do this via the web interface of the pineapple via a simple "enable proxy" button etc. Any feedback would be appreciated. #!/bin/bash if [[ $# -eq 0 ]] ; then echo "Usage: $0 (enable|disable)" exit 1 fi action="$1" case $action in enable) echo "Enabling ..." iptables -t nat -A PREROUTING -p tcp --dport 80 -j DNAT --to-destination 172.16.42.42:8080 #iptables -t nat -A PREROUTING -p tcp --dport 443 -j DNAT --to-destination 172.16.42.42:8083 iptables -t nat -A POSTROUTING -j MASQUERADE ;; disable) echo "Disabling ..." iptables -t nat -D PREROUTING -p tcp --dport 80 -j DNAT --to-destination 172.16.42.42:8080 #iptables -t nat -D PREROUTING -p tcp --dport 443 -j DNAT --to-destination 172.16.42.42:8083 ;; *) echo "Usage: $0 (enable|disable)" exit 1 ;; esac
  5. Also just noticed that performing a recovery does not delete or replace any of your storage scripts or files in the storage partitions. AWESOME !!!!
  6. in the mean time just did a forced recovery. On 3/8/2017 at 4:42 AM, Darren Kitchen said: Restore the Bash Bunny from the recovery partition: Set the Bash Bunny switch to position 3 (arming mode) Plug the Bash Bunny into a USB power source. The LED will momentarily light green. As soon as the LED goes off, unplug the Bash Bunny. Repeat the previous step twice more (for a total of 3 times) Plug the Bash Bunny into a USB power source and leave for 4 minutes. The LED will light RED to indicate recovery. When the light returns to BLUE blinking, the Bash Bunny has recovered.
  7. Is there a way to reset the root password without logging in.
  8. Awesome !!!! Thanks, next we need to add share internet to bashbunny on Mac.
  9. Nothing on bashbunny.com or the hak5 github repo. so repo mentioned in the video is still MIA.
×
×
  • Create New...