Jump to content

tman

Active Members
  • Posts

    10
  • Joined

  • Last visited

Everything posted by tman

  1. good new. with the newest firmware 1.1.1 asix network adapters are recognized. Now you see something similar to this in dmesg: ax88179_178a 1-1.3:1.0 eth1: register 'ax88179_178a' at usb-ehci-platform-1.3, ASIX AX88179 USB 3.0 Gigabit Ethernet, 00:05:1b:b0:3e:1f You still need to update /etc/config/network to use the interface.
  2. same module you are having the problem with. ax88179_178a module.
  3. I am trying to get the Lanturtle to work with my Nano without any success. Same issue with module being downloaded to 3.18.20.
  4. I think there is a version mismatch with the ax88179_178a module. when I did a opkg install kmod-usb-net-asix-ax88179 the module got downloaded to /lib/module/3.18.20 The rest of the modules on the Nano are in /lib/modules/3.18.23. I tried cp ax88179_179a.ko from 3.18.20 to 3.18.23. restated the Nano and had lots of messages in dmesg telling me that was a bad idea. del ax88179_179a.ko from 3.18.23. Does anyone know how I can get a 3.18.23 version of the ax88179_179a.ko module?
  5. lsmod shows the axis module is loaded but not the ax88179_178a module
  6. $ opkg status kmod-usb-net-asix-ax88179 $> data1.txt $ cat data1.txt Package: kmod-usb-net-asix-ax88179 Version: 3.18.20-1 Depends: kernel (= 3.18.20-1-7bed08fa9c06eb8089e82c200340ec66), kmod-libphy, kmod-usb-net Status: install hold,user unpacked Architecture: ar71xx Installed-Time: 1471180925 If the above errors were only about a kernel version missmatch, please ignore them. The package was installed successfully.
  7. I don't know if this info is useful in trying to make the Lanturtle work with the Nano. $ opkg install kmod-usb-net-asix-ax88179 $> data.txt $ cat data.txt modprobe: can't change directory to '': No such file or directory Collected errors: * pkg_run_script: package "kmod-usb-net-asix-ax88179" postinst script returned status 1. * opkg_configure: kmod-usb-net-asix-ax88179.postinst returned 1. Package kmod-usb-net-asix-ax88179 (3.18.20-1) installed in root is up to date. Configuring kmod-usb-net-asix-ax88179. If the above errors were only about a kernel version missmatch, please ignore them. The package was installed successfully.
  8. BeNE. Thanks you for being kind enough to let everyone know that operating systems from different sources are not the same. Troubleshooting 101. Lanturtle does not work with Nano. First make sure Lanturtle works. Have you tried Lantutle on a different host? Yes I have. Lanturtle works fine on another host. Good. Now we can rule defective Lanturtle out.
  9. when i plug the turtle into debian laptop it works fine. Automatically recognized and available for use.
  10. Hi All, I would like to connect a lanturtle to the USB 2.0 host port on the nano. I want to have ethernet internet connection and keep both wifi radios available. when I plug the lanturtle into the nano I see the lanturtle with lsusb. Bus 001 Device 006: ID 0bda:8152 Realtek Semiconductor Corp. This is as far as I get. ifconfig does not indicate that I have an eth1. dmesg show this: usb 1-1.3: new high-speed USB device number 6 using ehci-platform Could anyone share how to get from lsusb and dmesg seeing the lanturtel to having a working ethernet port.?
×
×
  • Create New...