Jump to content

TheYield

Active Members
  • Posts

    10
  • Joined

  • Last visited

Everything posted by TheYield

  1. Hello Mr-Protocol, Finally I got the Turtle running again. Before that I made some changes in the windows network environment (See Attachement). Impotant ofcourse is the fact to enable DHCP and let the computer automatically asign an IP address. Thank you so far, Regards Jos
  2. Hello Mr. Protocol, I tried again today and did what you told me to do and somehow I think I a close but something is missing. So let show you the details of the LAN Connection and the Turtle Connection (see attachements). I hope you can tell me what I have to change and how to manage this. I also had a succesfull the LAN Turtle recovery upload.
  3. Good Evening Mr.Protocol, I think I did almost everything you asked for But I still got no IP-address from the Turtle. I still also have some questions. - When I download the turtle-2-factory bin file, as I mentioned before, it comes in the "download"map. Is this correct and is that just it? Don't I have to open this Bin- file somehow? Or has the file to be downloaded to a specific map? - Further in you're instructions you say "If you do not receive an IP address in the 192.168.x range from the LAN Turtle within a minute, statically assign the LAN Turtle's interface to 192.168.1.2 (netmask 255.255.255.0)". How do I have to do this? Regards Jos
  4. Goodmorning Mr. Protocol, The problem started as I wanted to update it on 30-5-2016 while working after the first installation. I did the procedure "Check for Updates from the Config menu" exactly as told in the installation video. The update started but just stopped and did not continue not after 5 minutes and not after 30minutes. After that I had to pull out the turle because I needed the USB port for other activities. As I pushed in the LAN Turtle again only the green led burned. So I followed instructions opend up the Turtle and pushed in the Turtle with internet cabel while holding the button 3sec. Then the Green and orange leds were both burning. But still no internet connection. So now I am working with a normal Internet connection, I checked if the downloaded Turtle-2.bin file matched the Version 2 Update - Check for Updates from the Config menu : 479ebbb06ceea051d383d2e635a08e18. See Attachement I did this check with the little program WinMD5 I found on the internet. I think I did everything right. Now I am going to Push in the Turtle agai with internet cable holding button of Turtle 3sec. Still no internet connection. My next Question is - how do I Manually SCP the file to the LAN Turtle in /tmp (ex: scp turtle-2.bin root@172.16.84.1:/tmp/) ? Can I do this with the program WinSCP? If yes what do I have to do? Regards Jos
  5. Hello Mr.Protocol, I would like to explain what I did and Im doing so far and ask some questions to find out wether I am doing things right. First thing I did was the download of " Turtle-2.bin " file. It was downloaded in the Downloads map. I downloaded it from https://downloads.lanturtle.com/turtle-2-factory-bin as the instructions mentioned. Viewing https://downloads.lanturtle.com Turtle-2.bin should be Version 2 Update - MD5: 479ebbb06ceea051d383d2e635a08e18. I choosed the Update ! My questions - Is the "Downloads" map correct, and if not which map do I have to choose. - Do I somehow have to open the "Turtle-2.bin" file, and if yes with which program? Can you tell me if I did correct so far so that I can continue with the further instructions? Thank you so far, Regards Jos
  6. Well Mr. Protocol, my problem is that connected over the Turtle with the internet both leds are blinking but I have no internet connection. When I go to the MD5 and download the WinMD5free I can put in MD5: 9270d5e6822299e180017e50628d6973 code as I did in the attachement then it matches ofcourse. But were do I find the default MD5 value and can I replace it by this new code? The operating system I am working in is Windows 7. When I start the putty it still says no internet connection. So I can change or fill in anything. I hope you can help me on track anyhow. REGARDS jOS
  7. HEllo Mr.Protocol, were do I find de known Host? And were do I to copy the latest factory image from https://downloads.lanturtle.com/turtle-2-factory.bin to? I ask this because I think I probably have the same problem as Kalebra.
  8. Bedankt voor de informatie. Ik had al gelezen dat het opzetten van zo'n EU shop nogal wat papieren rompslomp met zich meebrengt. Ook zal ik op het trading post deel eens gaan kijken.
  9. Goedendag Bouvier, ik kan je helaas niet helpen met het probleem. Maar omdat je Nederlands spreekt zou ik graag willen weten of je de Pineapple in de VS of de EU gekocht hebt? Stel in de VS p hoeveel shipping e.a. extra kosten moet ik dan rekenen? Groet theyield
×
×
  • Create New...