maxentropy

My nano may be defective.. I purchased it last spring (March) -- & and I have never been able to get recon mode working reliably. I have been waiting patiently for a firmware release where recon mode actually worked 100% - and despite all of the work done there for the latest release, this box of mine fails all the time. I have just installed the latest firmware (1.1.2), formatted the SD card, reset everything to defaults. I have no modules installed. The nano is plugged into a 2.1A USB power supply. I access the nano via the management wifi interface. Recon mode when it works, works ONCE (@30 secs), maybe twice. ....then it freezes at 100% forever. Rebooting it sometimes fixes it, sometimes not. So -- This thing is -- IMO -- "unreliable." As I recall there was a batch of bad devices that shipped earlier this year. Is there any other diagnostics I can do to see why this thing freezes at 100% with the latest firmware installed?

I am having the same issues as other folks have mentioned here with my nano that arrived on 3/25. Recon mode freezes at 100% and the unit then stops working or slows down dramatically. I sent an email to shop@hak5.org on this issue. It would appear I also need a replacement unit. How might I accomplish this?

[ 0.000000] Linux version 3.18.23 (sebkinne@Worker) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46591) ) #9 Thu Mar 10 16:10:47 PST 2016 [ 0.000000] MyLoader: sysp=8a14b024, boardp=44b65156, parts=b69f8d32 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc) [ 0.000000] SoC: Atheros AR9330 rev 1 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 04000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x03ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x03ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff] [ 0.000000] On node 0 totalpages: 16384 [ 0.000000] free_area_init_node: node 0, pgdat 80355cf0, node_mem_map 81000000 [ 0.000000] Normal zone: 128 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 16384 pages, LIFO batch:3 [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: board=PINEAPPLE-NANO console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 60944K/65536K available (2466K kernel code, 128K rwdata, 528K rodata, 260K init, 188K bss, 4592K reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:51 [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) [ 0.080000] pid_max: default: 32768 minimum: 301 [ 0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.100000] NET: Registered protocol family 16 [ 0.100000] MIPS: machine is WiFi Pineapple NANO [ 0.380000] Switched to clocksource MIPS [ 0.380000] NET: Registered protocol family 2 [ 0.390000] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.390000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.400000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.400000] TCP: reno registered [ 0.410000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.410000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.420000] NET: Registered protocol family 1 [ 0.420000] PCI: CLS 0 bytes, default 32 [ 0.420000] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.440000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.440000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc. [ 0.450000] msgmni has been set to 119 [ 0.460000] io scheduler noop registered [ 0.460000] io scheduler deadline registered (default) [ 0.470000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.470000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a AR933X UART [ 0.480000] console [ttyATH0] enabled [ 0.490000] bootconsole [early0] disabled [ 0.500000] m25p80 spi0.0: found mx25l12805d, expected m25p80 [ 0.500000] m25p80 spi0.0: mx25l12805d (16384 Kbytes) [ 0.520000] 5 tp-link partitions found on MTD device spi0.0 [ 0.520000] Creating 5 MTD partitions on "spi0.0": [ 0.520000] 0x000000000000-0x000000020000 : "u-boot" [ 0.530000] 0x000000020000-0x0000001348d4 : "kernel" [ 0.540000] 0x0000001348d4-0x000000ff0000 : "rootfs" [ 0.540000] mtd: device 2 (rootfs) set to be root filesystem [ 0.550000] 1 squashfs-split partitions found on MTD device rootfs [ 0.550000] 0x000000dc0000-0x000000ff0000 : "rootfs_data" [ 0.560000] 0x000000ff0000-0x000001000000 : "art" [ 0.560000] 0x000000020000-0x000000ff0000 : "firmware" [ 0.590000] libphy: ag71xx_mdio: probed [ 1.190000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY] [ 1.200000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII [ 1.200000] TCP: cubic registered [ 1.200000] NET: Registered protocol family 17 [ 1.210000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 1.220000] 8021q: 802.1Q VLAN Support v1.8 [ 1.230000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. [ 1.240000] Freeing unused kernel memory: 260K (8036f000 - 803b0000) [ 2.650000] init: Console is alive [ 2.650000] init: - watchdog - [ 5.320000] usbcore: registered new interface driver usbfs [ 5.320000] usbcore: registered new interface driver hub [ 5.330000] usbcore: registered new device driver usb [ 5.380000] SCSI subsystem initialized [ 5.390000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.400000] ehci-platform: EHCI generic platform driver [ 5.400000] ehci-platform ehci-platform: EHCI Host Controller [ 5.410000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1 [ 5.420000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000 [ 5.440000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00 [ 5.440000] hub 1-0:1.0: USB hub found [ 5.440000] hub 1-0:1.0: 1 port detected [ 5.450000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.460000] ohci-platform: OHCI generic platform driver [ 5.470000] uhci_hcd: USB Universal Host Controller Interface driver [ 5.480000] usbcore: registered new interface driver usb-storage [ 5.770000] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 5.810000] init: - preinit - [ 6.420000] hub 1-1:1.0: USB hub found [ 6.430000] hub 1-1:1.0: 4 ports detected [ 6.600000] random: procd urandom read with 11 bits of entropy available [ 6.820000] mount_root: loading kmods from internal overlay [ 6.970000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform [ 7.130000] jffs2: notice: (325) jffs2_build_xattr_subsystem: complete building xattr subsystem, 2 of xdatum (0 unchecked, 2 orphan) and 2 of xref (0 dead, 2 orphan) found. [ 7.140000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab [ 7.160000] block: extroot: not configured [ 7.190000] jffs2: notice: (322) jffs2_build_xattr_subsystem: complete building xattr subsystem, 2 of xdatum (0 unchecked, 2 orphan) and 2 of xref (0 dead, 2 orphan) found. [ 7.250000] usb 1-1.2: new high-speed USB device number 4 using ehci-platform [ 7.350000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab [ 7.360000] block: extroot: not configured [ 7.370000] mount_root: switching to jffs2 overlay [ 7.410000] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 7.420000] scsi host0: usb-storage 1-1.2:1.0 [ 7.440000] procd: - early - [ 7.440000] procd: - watchdog - [ 8.470000] procd: - ubus - [ 8.680000] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE 0933 PQ: 0 ANSI: 6 [ 8.690000] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 9.490000] procd: - init - [ 11.750000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68 [ 11.760000] Backport generated by backports.git backports-20151218-0-g2f58d9d [ 11.910000] ath: EEPROM regdomain: 0x0 [ 11.910000] ath: EEPROM indicates default country code should be used [ 11.910000] ath: doing EEPROM country->regdmn map search [ 11.910000] ath: country maps to regdmn code: 0x3a [ 11.910000] ath: Country alpha2 being used: US [ 11.910000] ath: Regpair used: 0x3a [ 11.920000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 11.930000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2 [ 11.940000] usb 1-1.1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested [ 11.950000] usbcore: registered new interface driver ath9k_htc [ 12.300000] RPC: Registered named UNIX socket transport module. [ 12.300000] RPC: Registered udp transport module. [ 12.310000] RPC: Registered tcp transport module. [ 12.310000] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 12.340000] tun: Universal TUN/TAP device driver, 1.6 [ 12.340000] tun: © 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 12.370000] usbcore: registered new interface driver rt2800usb [ 12.380000] usbcore: registered new interface driver rtl8187 [ 12.410000] usbcore: registered new interface driver rtl8192cu [ 12.450000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 12.460000] usbcore: registered new interface driver cdc_acm [ 12.470000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 12.480000] usbcore: registered new interface driver cdc_wdm [ 12.500000] nf_conntrack version 0.5.0 (956 buckets, 3824 max) [ 12.540000] usbcore: registered new interface driver ums-alauda [ 12.540000] usb 1-1.1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 [ 12.550000] usbcore: registered new interface driver ums-cypress [ 12.560000] usbcore: registered new interface driver ums-datafab [ 12.570000] usbcore: registered new interface driver ums-freecom [ 12.580000] usbcore: registered new interface driver ums-isd200 [ 12.590000] usbcore: registered new interface driver ums-jumpshot [ 12.590000] usbcore: registered new interface driver ums-karma [ 12.600000] usbcore: registered new interface driver ums-sddr09 [ 12.610000] usbcore: registered new interface driver ums-sddr55 [ 12.620000] usbcore: registered new interface driver ums-usbat [ 12.640000] usbcore: registered new interface driver usbserial [ 12.640000] usbcore: registered new interface driver usbserial_generic [ 12.650000] usbserial: USB Serial support registered for generic [ 12.710000] xt_time: kernel timezone is -0000 [ 12.710000] usbcore: registered new interface driver asix [ 12.720000] usbcore: registered new interface driver cdc_ether [ 12.730000] ip_tables: © 2000-2006 Netfilter Core Team [ 12.750000] usbcore: registered new interface driver pl2303 [ 12.760000] usbserial: USB Serial support registered for pl2303 [ 12.770000] PPP generic driver version 2.4.2 [ 12.780000] NET: Registered protocol family 24 [ 12.790000] usbcore: registered new interface driver qmi_wwan [ 12.800000] usbcore: registered new interface driver rndis_host [ 12.800000] usbcore: registered new interface driver sierra_net [ 12.820000] ath9k_htc 1-1.1:1.0: ath9k_htc: HTC initialized with 33 credits [ 12.830000] usbcore: registered new interface driver option [ 12.830000] usbserial: USB Serial support registered for GSM modem (1-port) [ 13.080000] ath9k_htc 1-1.1:1.0: ath9k_htc: FW Version: 1.4 [ 13.080000] ath9k_htc 1-1.1:1.0: FW RMW support: On [ 13.090000] ath: EEPROM regdomain: 0x0 [ 13.090000] ath: EEPROM indicates default country code should be used [ 13.090000] ath: doing EEPROM country->regdmn map search [ 13.090000] ath: country maps to regdmn code: 0x3a [ 13.090000] ath: Country alpha2 being used: US [ 13.090000] ath: Regpair used: 0x3a [ 13.100000] ieee80211 phy1: Atheros AR9271 Rev:1 [ 22.930000] device eth0 entered promiscuous mode [ 29.410000] device wlan0 entered promiscuous mode [ 29.560000] device wlan0-1 entered promiscuous mode [ 29.560000] br-lan: port 3(wlan0-1) entered forwarding state [ 29.570000] br-lan: port 3(wlan0-1) entered forwarding state [ 29.590000] br-lan: port 2(wlan0) entered forwarding state [ 29.600000] br-lan: port 2(wlan0) entered forwarding state [ 30.390000] br-lan: port 3(wlan0-1) entered disabled state [ 31.600000] br-lan: port 2(wlan0) entered forwarding state [ 31.850000] br-lan: port 3(wlan0-1) entered forwarding state [ 31.850000] br-lan: port 3(wlan0-1) entered forwarding state [ 33.850000] br-lan: port 3(wlan0-1) entered forwarding state [ 44.240000] random: nonblocking pool is initialized root@Pineapple:~# ifconfig br-lan Link encap:Ethernet HWaddr 00:C0:CA:8D:BB:E9 inet addr:172.16.42.1 Bcast:172.16.42.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1818 errors:0 dropped:44 overruns:0 frame:0 TX packets:2048 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:305713 (298.5 KiB) TX bytes:1103178 (1.0 MiB) eth0 Link encap:Ethernet HWaddr 00:C0:CA:8D:BB:E9 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:4 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:481 errors:0 dropped:0 overruns:0 frame:0 TX packets:481 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:38892 (37.9 KiB) TX bytes:38892 (37.9 KiB) wlan0 Link encap:Ethernet HWaddr 00:C0:CA:8D:92:9E UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:786 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:62656 (61.1 KiB) wlan0-1 Link encap:Ethernet HWaddr 02:C0:CA:8D:92:9E UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1835 errors:0 dropped:0 overruns:0 frame:0 TX packets:2223 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:333853 (326.0 KiB) TX bytes:1179564 (1.1 MiB) wlan1 Link encap:Ethernet HWaddr 00:C0:CA:8D:C2:4E UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@Pineapple:~# Reporting Log

I am having the exact same problem. My nano just arrived today. I flashed it with the latest firmware (1.0.6) and it worked for a bit and now freezes almost every time when doing a recon scan.