Jump to content

Infinitynull

Active Members
  • Posts

    20
  • Joined

  • Last visited

Everything posted by Infinitynull

  1. Yes I did, and it was the same. I just don't think I got it in the root directory. I used the file system through Kali. It was in the same directory as the loot and payloads were in.
  2. I am having the same problem. Another problem the Bunny itself is very hot. I've contacted Hak5 support. This is ridiculous, I own almost every Hak5 product and this has never happened and it seems a hand full of people are having the same problem with no solution.
  3. Another problem the Bunny itself is very hot. I've contacted Hak5 support. This is ridiculous, I own almost every Hak5 product and this has never happened and it seems a hand full of people are having the same problem with no solution.
  4. Apparently I've tried to update to 1.1 incorrectly. It has a solid green on startup then it turns blank. After three times it goes into recovery mode I am assuming. Then once there it blinks red for a while. Then it turns blank again. I've waited ten minutes tried to replug it in assuming something went wrong it it was done. But it never blinks or goes solid green or blue after the red blinking. But just now It was blinking red then started to alternate red to blue. Now it's blank again, I will wait another fifteen minutes before I try anything else. What exactly is going on? I am assuming it's either trying to recover then flash. I moved the upgrade contents to the root file system. I don't know exactly what went wrong. Easier way to understand the problem: Plug In > Solid Green > Blank LED ........ Ten minutes has passed.... Replug In > Solid Green > Blank LED ....... Ten minutes has passed.... Replug In > Solid Green Blank LED ...... Ten minutes has passed.... Replug In > Blinking Red > Couple of Minutes Passed > Blinking Red . Blinking Blue . Blinking Red > Couple of Minutes Passed > Blinking Red > Couple of Minutes Passed > BLANK LED!!!! Ten minutes has passed... Replug In > Solid Green > Blank LED Every time it tries to recover then it will try to boot three times and try to recover again. It will never fully boot up nor will Kali recognize the file system or that it's plugged in.
  5. Guys, I've got my mouse on the buy button haha! When will the TETRA be back in stock, anyone have any idea?
  6. 16dBi Yagi Antenna: http://hakshop.myshopify.com/collections/wireless-gear/products/16dbi-yagi-antenna Long Range WiFi Booster Kit: http://hakshop.myshopify.com/collections/wireless-gear/products/long-range-wifi-kit I don't know the exact terms for the connecters SMA-Male and Female, RP|SMA-Male and Female. Anyways what do I need to connect the antenna to the wireless cards or booster?
  7. Alright, first of all. Adding the route gave me access to the Internet again through my wlan0 device. But even without the route this happened below, I tried manually and entered randomly to show the error. As it did not give me a list at all. I know you said he was working on the script. I thought maybe this would just be helpful. I can access the browser GUI for Pineapple. Though it has no Internet access as the bulletin can not load. I can also access the Pineapple through wireless if I disconnect the USB and power it with the Juice. What do I do? What is ether? I am not trying to be a problem child. I just really want to learn how to use and fix this. root@NKAL:~/Downloads# ./wp6.sh _ ___ _______ ____ _ __ | | / (_) ____(_) / __ \(_)___ ___ ____ _____ ____ / /__ | | /| / / / /_ / / / /_/ / / __ \/ _ \/ __ '/ __ \/ __ \/ / _ \ | |/ |/ / / __/ / / / ____/ / / / / __/ /_/ / /_/ / /_/ / / __/ |__/|__/_/_/ /_/ /_/ /_/_/ /_/\___/\__,_/ .___/ .___/_/\___/ /_/ /_/ v6.3 _ . ___ \||/ Internet: wlan0 192.168.1.1 ( _ )_ <--> [___] <--> ,<><>, Pineapple: ether 172.16.42.42 (_ _(_ ,) \___\ '<><>' Network: 172.16.42.0/24 Connect using saved settings [Y/n]? n Autodetect network configuration [Y/n]? y WiFi Pineapple Interface: ether Internet Interface: wlan0 Default Gateway: 192.168.1.1 Use above autodetected settings [Y/n]? n Select WiFi Pineapple Interface: > Response must be a listed numeric option Select WiFi Pineapple Interface: > Response must be a listed numeric option Select WiFi Pineapple Interface: > 1 Select Internet Interface: > 1 Usage: grep [OPTION]... PATTERN [FILE]... Try 'grep --help' for more information. Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlan0 0.0.0.0 172.16.42.1 0.0.0.0 UG 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlan0 172.16.42.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0 No Gateway available for selected Internet Interface. And the route -n output EDIT: Wrong output Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlan0 0.0.0.0 172.16.42.1 0.0.0.0 UG 100 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 600 0 0 wlan0 172.16.42.0 0.0.0.0 255.255.255.0 U 100 0 0 eth1 192.168.1.0 0.0.0.0 255.255.255.0 U 600 0 0 wlan0
  8. Alright I will re post in a minute or two with results. Why can I only post three times a day, have I done something wrong? I bought a lot from Hak5, or is this a anti-spam method?
  9. I need help with this, I can't even use the script. It won't detect that I am using wireless. When manually configuring the interfaces it won't even come up with a list for any option including the default gateway. What do I do? I'm using the nano pineapple and Kali Linux 2.0. The videos don't help me at all.
×
×
  • Create New...