Jump to content

Rainman_34

Active Members
  • Posts

    281
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by Rainman_34

  1. Yea if they are installed on a USB they are going to need to be symlinked.
  2. It will be monday before I have access to it again but I will create a dir for each infusion and put them in a dir titled firmware 30 so everyone knows which firmware they are for. I think i found randomroll for the 2.8.1 as well
  3. I have several but they are for firmware 3.0. I should have that firmware as well if people are interested
  4. I figured it out. Appearantly dd wrt wont forward if you have an internal ip address.
  5. Just using a router and its not opening the ports for some reason. Wven staying inside the network and using the router ip i cant reach the .132 address but if I connect directly to the .132 it connects so I know the ports are open on the server just not the router.
  6. Attached is a picture of my port forwarding page. As far as the version goes all I can find is v24 sp2 for a D-Link DIR-615 E3 from march 2013 which is the latest version for my router. Also for port 943 that has been /0 before. I just input it wrong when I was changing it back after some other attempts.
  7. I have tried leaving source net blank and without doing the iptables. When I get home I will post a picture of how I have it setup right now with the version of dd wrt I have. I know in the past all I did was put in the ports and destination IP and it worked fine. I may try my netgear to ensure it is the router
  8. When I get home I will try to post a picture. Also someone asked about being on the right page. Yes I am on the NAT/QOS PORT FORWARDING page. I mentioned iptables because a google search mentioned to add it to the iptables as well
  9. So I flashed my D-Link router with the DD WRT firmware because lets face it D-Link anything is unsecure. In the past I have been able to get it to forward ports to my server. However that was about two years ago and I am getting back into the network security realm and want to have my home server setup again. I am currently just trying to forward ports to my VPN server and it is not working. In the router I setup the following. Service I give it's own unique name so it is not seen but lets call the first one Mine1. Then I give the port type TCP. Then I give the source port 943. Then I give the source IP and since I will never know my outside IP I give it 0.0.0.0/0. Then I give the destination port of 943 and finish with the destination ip of 192.168.1.132. I click enable and save the changes, apply settings and reboot my router. Then when I try to connect the connection is denied. I do an nmap scan of my router and these ports appear closed on the router. When I attempt the connection directly to the .132 address it works just fine so I know the ports are open on the server. I have also gone into the router and attempted to change iptables which also does not work. Any help with this would be greatly appreciated. Without port forwarding the home server really doesn't do any good. Thanks again for any help provided.
  10. jm0202. If you have a computer at home (I use a linux server) that will be at home you can setup the openvpn server on that. Then you have to have a dns server like duckdns.org on your home router. On your router setup port forwarding for your VPN server. Then your connection to the vpn would be through your duckdns.org address. With this the turtle will connect to your home vpn and you can connect to it from anywhere in the world. Or you could just to ramnode.com which offers some smaller VPS options starting at $15 a month. But in short yes what you are asking is completely possible.
  11. I have been working with the ducky and have gotten a bit done with learning the coding. However when I attempt to use the duck encoder on my computer and I attempt to make a script for an apple the encoder comes back and says there is a syntax error for every line I type COMMAND attempting to use the mac command button. I know I have not made an error in my coding because when I use the online encoder and copy and paste the same code I get a proper inject.bin file that works on my computer. Could someone please help me with this or is my only solution to use the encoder online?
  12. i8igmac. Vbox is what I use right now but I can still only run 2 machines at a time. I was just thinking with the Rasberry Pi as cheap as it is if it would run them that would be a cheap way to run 4 or 5 at a time. I appreciate the help though everyone. Also to the admins. For some reason it wont let me mark this thread as answered but in my opinion it can be marked as answered as NoTele has provided me with the answer that the rasberry Pi will not run my desired OS
  13. i8igmac, I plan on running Metasploitable, and the De-Ice series of ISOs. They are all run in a version of linux. Is this as simple as installing it on the SD Card and plugging the SD Card in?
  14. So I have some old computers laying around that I have a pentest lab with several VMs running on. However I can only run one or two at a time and I would like to expand my lab. I have been looking at the Rasberry Pi because of it's incredibly low cost but I don't really know much about it. I know these are out dated but I also know they are great for learning on. I currently have all of the De-Ice programs metasploitable and the Vulnerable web. I would like to get some Rasberry PIs and run one ISO per rasberry PI. I do not have to keep the rasbian OS on there if that is not required. Is this possible and is it as simple as changing the OS or would I have to run them in a VM? Any help on this or directions to a tutorial would be greatly appreciated. I know the question is a bit newbish but I have never even really looked at the PI and want to be fully informed before investing in a few.
  15. I am running firmware 3.0 on the mark IV. I have gone to the configuration tile and put in a new management port. When I reboot the pineapple and put in the IP with my new port I get the page can't be loaded. I know it has updated though because when I go to the IP:1471 I also get the page can't be loaded. The only way I can get back to managing my pineapple is to SSH into the pineapple and change the /etc/config/uhttpd file back to 1471 and reboot the pineapple again. Can anyone help me with why my pineapple wont let me change the management port? I want to eventually change the IP subnet as well but with the problems of the management port I am affraid if I change the IP subnet I will cause a larger error preventing me from being able to connect to the pineapple at all.
  16. Ability Server is a great one to put on your windows machine if you are looking for vulnerable software to exploit. Very easy one with lots of tutorials on how to exploit and get a reverse shell. It will not leave a permanent back door unless you use metasploit to install one. Ability can only be exploited when it is running.
  17. I know I can always put a larger antenna on my wifi pineapple but that also limits the ability to hide it. Currently I have the wifi pineapple mark IV setup in my house for some experimenting and testing. However I have noted that the range for it is very limited. I can't seem to be able to access the pineapple on the other side of my house. And even going to a different room limits the signal I have. Is there a way to increase the output power so it has a larger range?
  18. I know this has been asked in the past but it seems that every answer I can find leads to a link which is no longer valid. I know the WAN port is for providing internet to the pineapple without a computer. So what I want to do is run a CAT5 cable from my home router to the WAN port on the pineapple. In doing this my pineapple receives an IP from the router and it even gets internet. However my pineapple won't pass that internet to any connected clients. Could someone please point me to how I can solve this issue so I can setup my pineapple to push internet to any connected clients while it is connected to my router without me having to keep a computer connected to it.
  19. The DRT does not actually track your cell phone. I can tell what tower it is using which allows them to pin point a general area. However you can not find someone with a DRT. Also in order to decrypt your traffic they must have more information.
  20. How are you encoding the inject.bin file? I know when I used the duckencoder.jar file it would give me an error for any lines with COMMAND SPACE. If you use the encoder online provided I had not issues with that. Also F4 brings up your applications window with a search bar at the top which will do the same thing.
  21. Not sure why your friend would think she is being tracked unless she thinks its her parents or a boyfriend or something. But as Barry99705 mentioned most public trackers work on cell signals or are data loggers and need recovered in order to pull the data off of them. In any case they either need to be connected to a power source of some sort or the batteries replaced on a regular basis. If it is battery powered the battery pack will be rather large which will limit where it can be placed. If it is connected to a constant power source in the car again that limits where it can be placed as there are very few places that will maintain power when the car is turned off. If it is not connected to a constant power source then it will lose signal every time the car is turned off which may not be an issue for who ever is monitoring the tracker in which case the places it can be placed are still limited but greatly more than constant power source. Regardless looking through the car, under the seats, in the bumbers, easy to access places. Most people are not going to go through the amount of work that it would take to pull parts off the car and hide something especially if they have to pull it off on a regular basis.
  22. My question is probably rather silly but if it is your server on your network why wouldn't you just login to the database and get the login creditials from there?
×
×
  • Create New...