Jump to content

r3g3x

Active Members
  • Posts

    38
  • Joined

  • Last visited

Everything posted by r3g3x

  1. I have a couple of questions I wanted to ask to help me understand how pieces of the pineapple tie together. I did read the help, have been working with the system, reading forums and watched videos. I understand some of this may be basic, but it might help someone with similar questions. When I scan and select the AP or AP and Client option, how does the pineapple determine when I can send a deauth found resources? There are times when the drop down has the deauth option and times it does not. I understand the deauth method and choosing deauth on client versus AP. Do the AP’s found in the scan have any relationship to PineAP? Does PineAP use the list of found AP’s and broadcast those out, or does it discover on its own AP’s being probed and broadcast those back? When I select all the options for PineAP, I am seeing a lot of probes and no connections. How does one force a connection or get a connection to happen. I had my pineapple running for many hours and turned my phone on and off, nothing. Does having a WPA2 network type make the connection more difficult because of the PSK? I thank everyone in advance for patience and answers. Jim
  2. I searched through and tried to find answers to the these questions but did not find what the exact answers. I apologize if this is basic but I am trying to understand all the functions. I scan and gather a bunch of SSID's and Clients and scan for several minutes. I then activiate my PineAP daemon with all boxes checked My SSID pool has several SSID's found from this all previous scanning activity Most of the SSID's are WPA or WPA2 Under the logging section I see a bunch of probes Nearly all of my SSID's are WPA2 since I am doing this with my home setup I forced a few open by adding something like BestBuy I only had one connection and that was to the open network BestBuy The connection was from my iphone The ones I had for WPA or WPA2 never connected The connected BestBuy which was my phone did not have Internet connectivity - the Pineapple did because I verified by checking bulletin Once I find the probes do I need to change my "Open AP SSID" to one of the once I scanned? What is the expected behavior of a client once it connects when Pine AP scans? One cool feature under in the scan page would be a vendor identification based on the MAC. What I am missing on the above, or is that expected behavior?
  3. Thanks Darren that fixed me up I went brain dead for a bit. Jim
  4. I am having connectivity issues with my NANO using Window’s 8. Here is what I can do: I can SSH into the pineapple without issue I can browse to the pineapple without issue When I Internet connectivity it does not work (check bulletins) Here are my settings: On Windows: I have my WiFi adapter configured to share with Ethernet 3. The Pineapple adapter: Ethernet adapter Ethernet 3: Connection-specific DNS Suffix . : lan Description . . . . . . . . . . . : ASIX AX88772A USB2.0 to Fast Ethernet Adapter Physical Address. . . . . . . . . : 00-C0-CA-8B-3C-B9 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 172.16.42.239(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Thursday, January 7, 2016 5:11:30 AM Lease Expires . . . . . . . . . . : Thursday, January 7, 2016 5:12:17 PM Default Gateway . . . . . . . . . : 172.16.42.1 DHCP Server . . . . . . . . . . . : 172.16.42.1 DNS Servers . . . . . . . . . . . : 8.8.8.8 NetBIOS over Tcpip. . . . . . . . : Enabled My shared adapter: Wireless LAN adapter Wi-Fi: Connection-specific DNS Suffix . : foo.bar.com Description . . . . . . . . . . . : company Y 802.11ac Network Adapter Physical Address. . . . . . . . . : XX-YY-ZZ-CB-D9-7F DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.115(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Wednesday, January 6, 2016 8:48:09 PM Lease Expires . . . . . . . . . . : Friday, January 8, 2016 5:24:36 AM Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled On my NANO: root@Pineapple-Nano:~# netstat -nr Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 172.16.42.42 0.0.0.0 UG 0 0 0 br-lan 172.16.42.0 0.0.0.0 255.255.255.0 U 0 0 0 br-lan root@Pineapple-Nano:~# ifconfig -a br-lan Link encap:Ethernet HWaddr 00:C0:CA:80:7C:2D inet addr:172.16.42.1 Bcast:172.16.42.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7454 errors:0 dropped:0 overruns:0 frame:0 TX packets:2723 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:731305 (714.1 KiB) TX bytes:334477 (326.6 KiB) eth0 Link encap:Ethernet HWaddr 00:C0:CA:80:7C:2D UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:10220 errors:0 dropped:7 overruns:0 frame:0 TX packets:2737 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1849024 (1.7 MiB) TX bytes:335129 (327.2 KiB) Interrupt:4 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:1114 errors:0 dropped:0 overruns:0 frame:0 TX packets:1114 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:95991 (93.7 KiB) TX bytes:95991 (93.7 KiB) wlan0 Link encap:Ethernet HWaddr 00:C0:CA:8B:3A:67 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3847 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:366636 (358.0 KiB) wlan0-1 Link encap:Ethernet HWaddr 02:C0:CA:8B:3A:67 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3846 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:366276 (357.6 KiB) wlan1mon Link encap:UNSPEC HWaddr 00-C0-CA-8B-3B-F0-00-44-00-00-00-00-00-00-00-00 UP BROADCAST NOTRAILERS RUNNING PROMISC ALLMULTI MTU:1500 Metric:1 RX packets:36929 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:8385061 (7.9 MiB) TX bytes:0 (0.0 B) Is there a command I can run from the command line that checks the bulletins, etc? I tried pings and nslookup – no luck. I am missing something simple here – any ideas? Thanks, Jim
  5. Thanks Darrin - I sent an e-mail to shop@hak5.org, hopefully there is one available I can purchase. Thanks, Jim
  6. When we receive these this week, will there be infusions ready or will we need to wait like the NANO? Jim
  7. I need a replacement for my NANO Y USB cable. On the Y side the longer cable, the ends bent back a bit. Can you point me to a replacement cable I can use? Thanks, Jim
  8. I just got mine and flashed it. Until there are modules and further documentation ready, any plans for videos on what we can do with the non-moduled pineapple? It was simple to get going. Thanks, Jim
  9. If we are not developers but want to help vet code and hang with the cool kids on the bleeding edge, we really loose nothing by buying now. Or put another way, we don't gain anything but waiting to but until its certified. Thanks - I'll stop pestering with questions. I am really excited about playing with the NANO. Jim
  10. Darrin: The Mark V will no longer be sold, is that correct. The future direction is the NANO and will become the pineapple current standard? Based on the previous posts still will work with windows and buying the development version should be no different than the version that will be certified at some time in the future. Do I have the above correct? Jim
  11. Thanks I did that - I have a patience problem because I want the Mark V. :)
  12. I am waiting for more Pineapples to be available for sale? Any idea on the ETA for them? Thanks, Jim
  13. Hi All: I bought a Mark IV last year and now I am getting around to using it. I installed a bunch of packages and have the firmware at 3.0.0. I have a USB device configured and working, I do have packages on it. Verifed by SSH'ing to the device. Now I cannot download anymore packages. I see downloading, installing to USB and nothing. I check the USB, check temporary directories. I found the code on the system that downloads and installs the fusions. All works great until I try to make a symbolic link (exactly as in the system code) - I get no space left on device. There is plenty with the exception of the /rom filesystem. Anyone run into this? I am UNIX literate and know my way around the system. But this stumps me. Thanks, Jim
×
×
  • Create New...