Jump to content

IMcPwn

Active Members
  • Posts

    36
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by IMcPwn

  1. I figured out ifconfig wlan0 which worked, I just couldn't figure out the name of the cellular interface which turns out was rmnet0. Executing below ifconfig -a returned -a: No such device The two below worked great! busybox ifconfig busybox ifconfig -a Thanks!
  2. I turned off data on my phone, left WiFi on and still had Internet on the Pineapple so I expect so!
  3. Introduction: This process requires an Android phone capable of running the EasyTether app which can be downloaded here: http://www.mobile-stream.com/a/easytether-device.apk and also possibly an SD card. The Lite version of the app prevents https & udp connection, so to use those you have to pay mobile stream $10 once, which I still think is better than paying your carrier that every month. I do not endorse tethering data without your carrier's permission, proceed at your own risk. I am currently working on a module that will automate this process, if you can't figure out this tutorial you can wait for that or contact me. Setup on Android: Download and install the EasyTether app and follow the in-app instructions for setting up USB Tethering. Setup on the Pineapple: You will need to install EasyTether for Openwrt located here: http://www.mobile-stream.com/easytether/drivers.html I used the OpenWrt 15.05 --openssl which I show being downloaded below. NOTE: You may need an SD card for this as it is a larger file. The below commands assume you have an SD card set up correctly. If you do not with to install to your SD card ignore the --dest sd options below and know that it may not work. root@Pineapple:/sd# wget http://www.mobile-stream.com/beta/openwrt/easytether-usb-openssl_0.8.5-1_openwrt-15.05-rc3.zip Once you downloaded the package, install unzip so you can open the previously downloaded compressed package. (BTW if anybody knows the the two errors at the bottom are let me know, to my knowledge they do not effect the packages being installed. My assumption is that opkg is searching in /usr when it should be looking in /sd/usr). root@Pineapple:/sd# opkg install unzip --dest sd Installing unzip (6.0-3) to sd... Downloading https://downloads.openwrt.org/chaos_calmer/15.05/ar71xx/generic/packages/packages/unzip_6.0-3_ar71xx.ipk. Configuring unzip. grep: /usr/lib/opkg/info/unzip.control: No such file or directory cat: can't open '/usr/lib/opkg/info/unzip.list': No such file or directory Then unzip the EasyTether application. root@Pineapple:/sd# unzip easytether-usb-openssl_0.8.5-1_openwrt-15.05-rc3.zip Then cd to the correct application distribution. root@Pineapple:/sd# cd 15.05-rc3/ar71xx/generic/ Then install the application! root@Pineapple:/sd/15.05-rc3/ar71xx/generic# opkg install easytether-usb-openssl_0.8.5-1_ar71xx.ipk --dest sd After that you can run the application (you do not need to be in any specific directory anymore) root@Pineapple:/sd/15.05-rc3/ar71xx/generic# easytether-usb Now control-C because the Pineapple doesn't have Internet just yet, you need to configure it to allow Internet sharing from Android by running the below command (all the lines at once). cat << EOF >> /etc/config/network config interface 'wan' option ifname 'tap-easytether' option proto 'dhcp' EOF You should be all set and see "Connection Established" if you followed the Android instructions correctly and have Internet on your Pineapple! If you need more help ask me or read MobileStream's tutorial. Good luck guys!
  4. The URL is not incorrect, they just have not set it up to be public yet. I believe it will include packages like aircrack so you can update those later. I cannot answer the other two questions you have.
  5. wp6.sh doesn't work directly from a Terminal Emulator on my phone (Android 5.0.1/ Sprint) and I couldn't use iptables because ifconfig doesn't show any interfaces. I did find a solution that can tether Wi-Fi OR Data without any plan, it does require 3rd party software though. I'm working on a tutorial right now that I will release soon for anybody who is interested. Thanks anyway though Darren!
  6. Does anybody have a workaround for tethering to the pineapple without a tethering plan? (root can be required) I have attempted ClockworkMod Tether but this requires a listener on the computer end which uses NodeJS and adb, neither of which I can find precompiled for openwrt. I have not attempted cross compiling either of those because I couldn't find an adb source. I also attempted using iptables, which my phone either had preinstalled or it came with BusyBox, but I just don't know this program well enough to figure out how set up internet sharing. Any ideas? Thanks!
  7. By the way, some paths in running nginx -V seem invalid. root@Pineapple:/etc/nginx# nginx -V nginx version: nginx/1.4.7 built by gcc 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46581) configure arguments: --crossbuild=Linux::mips --prefix=/usr --conf-path=/etc/nginx/nginx.conf --add-module=/home/sebkinne/raid/hak5/pineapple/nano-firmware/build_dir/target-mips_34kc_uClibc-0.9.33.2/nginx-1.4.7/nginx-naxsi/naxsi_src --without-http-cache --add-module=/home/sebkinne/raid/hak5/pineapple/nano-firmware/build_dir/target-mips_34kc_uClibc-0.9.33.2/nginx-1.4.7/nginx-syslog --error-log-path=/var/log/nginx/error.log --pid-path=/var/run/nginx.pid --lock-path=/var/lock/nginx.lock --http-log-path=/var/log/nginx/access.log --http-client-body-temp-path=/var/lib/nginx/body --http-proxy-temp-path=/var/lib/nginx/proxy --http-fastcgi-temp-path=/var/lib/nginx/fastcgi --with-cc=mips-openwrt-linux-uclibc-gcc --with-cc-opt='-I/home/sebkinne/raid/hak5/pineapple/nano-firmware/staging_dir/target-mips_34kc_uClibc-0.9.33.2/usr/include -I/home/sebkinne/raid/hak5/pineapple/nano-firmware/staging_dir/target-mips_34kc_uClibc-0.9.33.2/include -I/home/sebkinne/raid/hak5/pineapple/nano-firmware/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/usr/include -I/home/sebkinne/raid/hak5/pineapple/nano-firmware/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/include -Os -pipe -mno-branch-likely -mips32r2 -mtune=34kc -fno-caller-saves -fhonour-copts -Wno-error=unused-but-set-variable -msoft-float -mips16 -minterlink-mips16' --with-ld-opt='-L/home/sebkinne/raid/hak5/pineapple/nano-firmware/staging_dir/target-mips_34kc_uClibc-0.9.33.2/usr/lib -L/home/sebkinne/raid/hak5/pineapple/nano-firmware/staging_dir/target-mips_34kc_uClibc-0.9.33.2/lib -L/home/sebkinne/raid/hak5/pineapple/nano-firmware/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/usr/lib -L/home/sebkinne/raid/hak5/pineapple/nano-firmware/staging_dir/toolchain-mips_34kc_gcc-4.8-linaro_uClibc-0.9.33.2/lib' Specifically /home/sebkinne which doesn't exist :)
  8. I found a tutorial for adding SSL to the Wifi Pineapple Mark V. https://github.com/hak5/wifipineapple-wiki/blob/gh-pages/add_ssl.md To my knowledge this does not work on the Nano. First issue appears when installing with the --dest usb option. * resolve_pkg_dest_list: Unknown dest name: `usb'. I figured this was for the SD card and installed it without that parameter, no errors. The Nginx configuration part does not work at all though following the configuration exactly. I've never used nginx before so I'm unfamilar how to fix nginx: [emerg] the "ssl" parameter requires ngx_http_ssl_module in /etc/nginx/nginx.conf:61 My exact configuration is (yes the certs are valid and exist) So far loving the hardware and UI, thanks Hak5!
  9. Wow. I didn't even realize you posted this, but I made Responder functional with a module: https://github.com/hak5/lanturtle-wiki/pull/8 Currently it is fully functional against the host machine the turtle is plugged into but I'm still working on finding a way to enable it to open those ports to the whole LAN.
  10. Hi. I'm IMcPwn. This is my first post and I'm not sure exactly what the etiquette is here but I just wanted to get some feedback on a new module I contributed to. You can't really say I made it because it's mostly Darren Kitchen's work with my modifications plus a payload by msfvenom. Anyway the module is "meterpreter_sl" and here's the link to module's pull request: https://github.com/hak5/lanturtle-wiki/pull/6 The direct meterpreter_sl executable would have to be accepted first if the module is to work, which can be seen here: https://github.com/hak5/lanturtle-files/pull/3 Basically what the module does is adds a new payload "php/meterpreter_reverse_tcp" which is the stageless version of the current "php/meterpreter/reverse_tcp". For those who don't know a stageless meterpreter session has the payload build-in so less data is sent over the network when the session is opened, therefore being stealthier. Just looking to get some feedback to see if the community wants this. Thanks guys and happy LAN Turtling!
×
×
  • Create New...