Jump to content

johnjohnsp1

Active Members
  • Posts

    16
  • Joined

  • Last visited

Everything posted by johnjohnsp1

  1. hello, during a test with my wifipineapple tetra right after upgraded to the new and latest firmware I did found out that module mdk3 and all others related to that is not working anymore. as Example: root@Pineapple:~# airmon-ng PHY Interface Driver Chipset phy0 wlan0 ath9k Not pci, usb, or sdio phy1 wlan1mon ath9k Not pci, usb, or sdio phy2 wlan2 rt2800usb Ralink Technology, Corp. RT2870/RT3070 root@Pineapple:~# mdk3 wlan1mon d the command does no output it just stand with no results over and over anyone else got this issue ? its just me or probably need to move on and change on the repository the old mdk3 with the "new" mdk4 ? thanks in advice
  2. Hello everyone, recently I tried to use my pineapple mark V, but once I plug the power I see all the led (orange, blue and red) blinking , just the green led is solid. firmware is 2.4.0 no upgrade or anything else. I then tried to recover with dip switch like: 1UP 2DOWN 3DOWN 4UP and 5UP --> powered on and waited at least 10 minutes. I then have powered off and turned back all the DIP switch as default all UP but seems nothing is happening since once I powered back on all the led (orange, blue and red) are blinking just the green is solid. any got the same problem and know how to fix it by any chance ? thanks
  3. Update on QuickCreds run, did those following steps: -mounted bunny on windows machine (arming mode) -deleted all the files -copied and installed the new firmware 1.3 -copied and overwrited all the files with https://github.com/hak5/bashbunny-payloads -installed the tools impacket & responder with "DEB" package provided here: -putty client to configure em both ovr the bunny -mount -o sync /dev/nandf udisk/ -cp *.deb /tools -dpkg --install impacket.deb -dpkg --install responder.deb -from windows copied the QuickCreds payload.txt over switch1 folder -unplugged safely -switch1 -re plugged in -completed successfully /cheers -
  4. thanks for the replay but even If downloaded again now the payloads tree from GitHub the result doesn't change, quickcreds according to repo is updated a month ago .. are you getting the same error or issue within firmware 1.3 ? cause on 1.2 was perfectly working
  5. have you checked that both impact is installed and responder is inside tools folder ? , happened to me once, after checked that the led changed from red/solid red to yellow
  6. Hello all, did install new firmware 1.3 coming from 1.2 , unfortunaly i see QuickCreds is no longer working (blinking . Anyone else did noticed this after the upgrade or its just me ? Both tools (impacket and responeder) are correctly installed and can be used as logged in directly. Made sure inside the /extensions folder all the files are Unix format. Did flash the firmware few times by now, led are blinking blue/red as supposed to be Did cloned the payload repository to match the latest version After this all those tries i get: # Set LED yellow, run attack LED ATTACK in a loop no loot folder has been modified any hint ? thanks
  7. Ok, i found out what was the problem that made any attempt with Quickcreds fail ! inside the folder tree i had: /tools/Responder instead of /tools/responder/ , and even if changing the payload.txt to point at /tools/Responder/ the code somehow was failing. Decide then to rename /tools/Responder with /tools/responder without any modify of payload and voila ! the code was completed without any errors. Thanks to Altecheon to let me run that test and let me think once more again on it i dont know why even if modify the payload and point Responder instead of responder wasnt working but at least now is working so it's all good !! /cheers
  8. Thanks for the answer, i was able to running the code you posted: -confirm the LED R SLOW is ok and here is the content of the TestOutput: 172.16.64.10 WS-ATIHD6870 so i think everything is completed fine without any errors. I still dont understand why the Quickcreds hang on LED R SLOW and fail... thanks anywways
  9. I did try this code and my return is: Switch£çswitch2 ' IPç ' HOSTç ' BunnyIPç 172.16.64.1 does that mean anything is not working ? looks like the only variables returned are switch&host_ip but not target_ip & hostname ? no clue but probably is related to the quickcreds not working ..
  10. Hello, within the new upgraded firmware from 1.0 to latest 1.1 i have some problems with running payloads that need to "GET TARGET_IP". i have downloaded the latest payloads folder tree with git --> https://github.com/hak5/bashbunny-payloads/ this is the content of the get.sh file inside the folder /payloads/library/extensions: #!/bin/bash function GET() { case $1 in "TARGET_IP") export TARGET_IP=$(cat /var/lib/dhcp/dhcpd.leases | grep ^lease | awk '{ print $2 }' | sort | uniq) ;; "TARGET_HOSTNAME") export TARGET_HOSTNAME=$(cat /var/lib/dhcp/dhcpd.leases | grep hostname | awk '{print $2 }' | sort | uniq | tail -n1 | sed "s/^[ \t]*//" | sed 's/\"//g' | sed 's/;//') ;; "HOST_IP") export HOST_IP=$(cat /etc/network/interfaces.d/usb0 | grep address | awk {'print $2'}) ;; "SWITCH_POSITION") [[ "$(cat /sys/class/gpio_sw/PA8/data)" == "0" ]] && export SWITCH_POSITION="switch1" && return [[ "$(cat /sys/class/gpio_sw/PL4/data)" == "0" ]] && export SWITCH_POSITION="switch2" && return [[ "$(cat /sys/class/gpio_sw/PL3/data)" == "0" ]] && export SWITCH_POSITION="switch3" && return export SWITCH_POSITION="invalid" ;; esac } export -f GET Opened with Notepad++ i have aso did the step: --> Edit --> EOL --> convert to UX format. I remove the BB, switch1 then plugged in i still see the Purple led and right after keep getting red led continuosly. inside the loot folder the result is noname. may the GET TARGET_IP not working as intended or as the previous bunny_helpers.sh ? Both responder and impacket are installed. really have no idea why fail ... any help ? or any that get the same issue on new firmware 1.1 ? thanks
  11. confirmed also by my attempt to get mdk3 and still getting the same message, root@Pineapple:~# opkg --dest sd install mdk3 Installing mdk3 (v6-1) to sd... Downloading http://cloud.wifipineapple.com/mk5/packages/mdk3_v6-1_ar71xx.ipk. wget: server returned error: HTTP/1.1 404 Not Found Collected errors: * opkg_download: Failed to download http://cloud.wifipineapple.com/mk5/packages/mdk3_v6-1_ar71xx.ipk, wget returned 1. * opkg_install_pkg: Failed to download mdk3. Perhaps you need to run 'opkg update'? * opkg_install_cmd: Cannot install package mdk3.
  12. started a @runtastic live tracking session. See my progress live and cheer me on - http://t.co/IaTkZjRY #runtastic #iphone

  13. i can confirm the same issue, once i use "client mode" on the wired connection tab i don't have internet access. i used as parameters: default 192.168.1.254 0.0.0.0 UG 0 0 0 wlan1 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 192.168.1.0 * 255.255.255.0 U 0 0 0 wlan1 once i use recon mode or pine ap i will lost the internet connection so does the client connected thru the mark5 using last firmware available 2.4.0
  14. Hello, been few hours looking around the forum about the ICS and so far have see many posts with ICS with Linux or Windows. My question is : -how the ICS work with the mark5 connected ethernet thru a router/Switch ? the script still working ? how do you setup the mark5 on the Network section ? my setup is: from infusion --> network --> wired section --> Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.1.254 0.0.0.0 UG 0 0 0 wlan1 192.168.1.0 * 255.255.255.0 U 0 0 0 br-lan 192.168.1.0 * 255.255.255.0 U 0 0 0 wlan1 br-lan Link encap:Ethernet HWaddr 00:13:37:A5:56:4F inet addr:192.168.1.133 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:183633 errors:0 dropped:30864 overruns:0 frame:0 TX packets:36835 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:52641992 (50.2 MiB) TX bytes:10742125 (10.2 MiB) with this one i just provide mark5 for the access to the webpage but no web until i configure and setup the wlan1 interface like this: wlan1 Link encap:Ethernet HWaddr 00:13:37:97:2E:EB inet addr:192.168.1.109 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:140421 errors:0 dropped:28176 overruns:0 frame:0 TX packets:1116 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:40998187 (39.0 MiB) TX bytes:91435 (89.2 KiB) but now the problem is: once pineap and karma is fired up i lose the internet connection and still connected with the mark5 in order to see what going on but ? how the rogue ap will get thru the web ? Any ideas ? i need to use an external wlan2 to get the game going ? pretty strange that i cannot just share the internet connection with the mark5 thru a router thanks
  15. I can also confirm that i have the same issue with Mark5 v. 2.4.0 have access to the local device by the IP i set as static but it still doesn't route to the internet. DHCP does nothing. wlan1 is the only way i have to getting to the internet.
  16. Hello folks, I'm playing with my newly pineapple mark5 and getting this message every time i log into the web interface: "WiFi Pineapple Bar Linker The infusion linker has detected orphaned infusions stored on your SD card. It has automatically added them to the webinterface. You may now close this popup. dd " Actually i have installed all the user infusion i have found on the list to the SD may is that a reason. Beside that the device is working .. anything i can do to remove it or just don't care ? Let me know please Thanks
×
×
  • Create New...