Jump to content

scott2003

Active Members
  • Posts

    5
  • Joined

  • Last visited

Recent Profile Visitors

223 profile views

scott2003's Achievements

Newbie

Newbie (1/14)

  1. It's a shame. I hardly use my pineapple any more because what you are trying to accomplish on the pineapple is really simple on Kali by using MITMF - unfortunately the pineapple doesn't support MITMF and it never will due to hardware limitations according to the author.
  2. Lan or Wifi? You need to connect by Lan first and enable the access point controls for access. just use the IP and not the port number if connecting by LAN.
  3. Hi smeardoss First make sure the ethernet cable is good - so switch to a known working one. 1. check all 4 dip switches on the side are in the up position (assuming you have the lights on top) 2. when entering the ip - only use 172.16.42.1 (don't add the :1471) 3. are you using windows/linux? if you are using vbox/vmware exit this first and use your default os browser. 4. make sure your network config (windows/linux) show that the ethernet is connected. 5. if all fails try manually getting into the Pineapple. In linux open a terminal and enter the following - ssh root@172.16.42.1 it will then ask for your password. If all goes well you will be in the pineapple and you can configure it from a command line (ifconfig/airmon-ng/airodump-ng etc) I prefer the command line anyway as it lets me run scripts like wifite easiliy. dont worry too much - I was a total beginner a few months ago and now i am really enjoying learning about this stuff. What I have found is that some things just plain do not work out of the box and require some tinkering. Good luck and if you are not already, use Kali natively on your laptop - i have dual os's kali and windows 7. The bonus of having it natively instead of a virtual machine is that you can use the graphics card and accelerate cracking etc. Also things are recognised easily.
  4. Just to update anyone having issues with no networks seen in monitor mode - for some reason I had to ssh into the Mk 5 and ifconfig wlan1 down and then start monitor mode. The gui - even with the radios stopped does not work like this for me.... at least its working now.
  5. Hello all, I have had the MK V for a few weeks now and all was great until yesterday when I got a strange problem. My Wlan1 is not seeing any access points except the pineapple itself - disabling the pineapple access point just gives an empty list when scanning - its like i have zero range suddenly even in monitor mode. I tried a few things. 1. SSH and airodump to see if it was just a tile issue - same issue 2. switched antenna for a known working one from wlan0 and another pineapple mkv antenna - no luck 3. Factory reset + ssd card wipe - not fixed. Any help would be great but im out of ideas. Wlan0 and any usb wifi adapter picks up access points fine - nothing seen except the pineapple on wlan1 though... Thanks.
×
×
  • Create New...