Jump to content

Altrez

Active Members
  • Posts

    22
  • Joined

  • Last visited

Everything posted by Altrez

  1. Hello, You have to downgrade to get the modules to work again. They do not work in 2.6.1 and I am not sure if they are being worked on to be compatible.
  2. 2.6.X is having a lot of issues at the moment with dependencies. You can down grade and it should be fine.
  3. Yeah I saw that. Thanks for all the help. As I get time I am also testing with you on your other thread.
  4. The Attack is broken in the wps.sh script "MYCMD=`cat /tmp/wps.run`" Bully and Reaver install fine. so it fails on the webpage.
  5. Hello, I do not think the new Firmware is ready yet. The out of the box shark jack does not support c2.
  6. After doing some research it looks like the 2.6.1 FW is somewhat broken and that is why some of the modules do not work.
  7. Is anyone working on a fix for the 2.6.1 firmware or do we need to downgrade for now?
  8. I have issues on 2.6.1 with Dwall, Urlsnarf. Ettercap so far. Below is a list of modules that I have tested and seem to work correctly: Manage Modules Cabinet Deauth Evil Portal RandomRoll Site Survey Something is defiantly broken in the new firmware. Does anyone have a clue how to fix it or is a downgrade the only way to have a fully working device at this point in time?
  9. I went into the /pineapple/modules/ettercap/scripts folder and took a look at dependencies.sh. As I walked through the script I noticed this: opkg install ettercap I tried to run that command and it failed: Unknown package 'ettercap'. Collected errors: * opkg_install_cmd: Cannot install package ettercap. I am guessing that is why the install is not working on the webpage.
  10. Hello Cap__Sig, I just got the Tetra a week ago and when I did the set up it installed the 2.6.1 FW. I have a few other modules installed they work fine and have been tested ones like EvilAP and Randomroll. I can ssh into the Tetra and was just wondering if there might be a log from the install that might show why it is falling as the web-page gives no information. Thank you for the help.
  11. Hello All, I click to install Dependencies and it just sits there and goes back to not installed. How do I troubleshoot this?
  12. Altrez

    Shell Access

    That is going to be great!
  13. Hello All, I just got my Tetra installed and updated. I enabled PineAp and can see all the Access Points that it found but cannot connect to any of them at all. I get an Authentication Error on every device I try. I set up the open SSID and can not connect to it either. Auth errors on every SSID from the Tetra. I can connect to the management SSID just fine. Any ideas? EDIT: I figured out that you have to set your SSID Filtering to Deny listed. It now works as expected.
  14. Altrez

    Shell Access

    I got it working. I setup a listener on a VPS Linux box on Azure and then piping to it from the Shark. Working on tweaking the nmap payload to run it at the start. Lasted 2 minutes but it did work. For some reason when the nmap is done the shark dies. Will post a full how to as soon as its stable.
  15. I am getting close to adding some apps. We have the CPU info: root@shark:~# cat /proc/cpuinfo system type : MediaTek MT7628AN ver:1 eco:2 machine : Hak5 Shark Jack processor : 0 cpu model : MIPS 24KEc V5.5 Here is the link to the builds: http://archive.openwrt.org/releases/packages-18.06/ Still can not get anything to run so any help would be great 🙂
  16. Hello Everyone, I got my Shark Jack in yesterday and used it for around 2 hours. It worked fine using Nmap to scan a local subnet when plunged into a switch port. The battery life is around 12 minutes and it gets very hot when charging. I noticed it would crash when the battery got low if I had it plugged in a jack looking around in arming mode. To fix that I simply plugged in a usb c cable and could stay in as long as I wanted. One thing I really like is the LED indicator lights making the jack glow different colors based on the current actions, its a really neat and effective feature. I also setup a usb network card on my Windows 10 workstation so I could easily plug in the Shark to look at my scans without having to unplug my network connection and that works great. It would be nice if we could add a few more tools to the Shark like for instance macchanger would be a killer app on the Shark Jack. I was going to try to get it on the internet today to see if I could add a few things to the Open-WRT build that's on it: root@shark:/etc# cat os-release NAME="OpenWrt" VERSION="18.06-SNAPSHOT" ID="openwrt" ID_LIKE="lede openwrt" PRETTY_NAME="OpenWrt 18.06-SNAPSHOT" VERSION_ID="18.06-snapshot" The Shark Jack is a cool new gadget that you should consider adding to your pen-test tool bag, I feel like it can only get better moving forward and with a few more good tools added to the Shark Jack it can really be a goto first pass recon security tool.
  17. Altrez

    Shell Access

    Hello All, I am trying to figure out a way to get internet access on the Shark jack when I place it on a switch port. The nmap scanning is super fast and it would be nice if it would also open up a reverse shell to a local pen testing box as a PoC. Anyone have any ideas on how that might work?
  18. Hello Everyone, This Payload works great on every Non-Domain workstation I try it on. However is a user is logged in as mydomain.local\hackme it will not work. Has anyone made any adjustments to fix this? Thanks!
  19. Fixed! I replaced the power supply and it is working now. -Altrez
  20. Hello Everyone, I got a new MarkV in the mail today from UPS. I followed the instructions but the MarkV never shows as being connected to my computer via the NIC. I let it sit for at least 1 hour and it never shows connected on my PC. I have tried different cables and different computers. So the next thing I did was the emergency flash and that worked fine. The ethernet connection to the PC came right up when I put it into recovery mode. I loaded the recovery mode image on the MarV it loaded just fine. Put the dip switches back in place and booted it back up. Now its still doing the same thing I cannot connect to the V with a network card I have tried crossovers straight throughs everything I can think of. The network light comes on for 1 second when it first boots that is it. However like I said if I go to recovery mode everything works perfectly. Do I have a bad unit? -Altrez
×
×
  • Create New...