hairbag

had it working once then i rebooted the pineapple now cant get to work again. anyone have any luck with a huawei data stick or know whats up? dmesg shows the data stick is there as does lsusb

try ssh in and ifconfig wlan1 up and ifconfig wlan1 down

recent wifite crashes on kali havent tried on pineapple. something borked worse now.

rmmod hackrf (unload module from kernel) only does a temp fix something is borked as it keeps going back to the hackrf errors. any suggestions on how to fix permanently?

things seem to be loading much faster and running much much smoother still issues with missing scrollbars on a few infusions. would be nice to be able to resize tiles on the main page. many tilies could use more real estate while others could use less. some dont need anything other than a name bar

in the factory unbrick proceedure mine would not do anything until i set the ip to 192.168.1.2 and the subnet to 255.255.0.0. normally the subnet mask is 255.255.255.0 Unbricking a bricked WiFi Pineapple MKVBricked your WiFi Pineapple MKV? Unbricking is easy and doesn't require any extra hardware! Download the special factory image. This image is the WiFi Pineapple MKV's 2.0.4 firmware, packaged differently to allow unbricking. Please verify it's md5 checksum to be 8f684011ad40ca601cf159cd3381f7e0. Power off your WiFi Pineapple MKV and set the DIP switches to up, up, up, up, down (from left to right). Connect to your WiFi Pineapple MKV via ethernet and set your network interface to a static IP of 192.168.1.2 Boot up the WiFi Pineapple MKV. After around five seconds, you can navigate to http://192.168.1.1 Upload the factory.bin file through the interface. Wait for it to complete. Set all the DIP switches back to the default configuration up, up, up, up, up (from left to right). Set your network interface to 172.16.42.42 (or DHCP) Make sure the SD card is inserted and powercycle the WiFi Pineapple MKV. Your device will now boot the 1.2.0 firmware. Please wait patiently and refer to the first boot instructions in your WiFi Pineapple MKV instructions. You may skip any information relating to the stager. You are done. Enjoy your freshly flashed WiFi Pineapple MKV!

need to set subnet in unbrick proceedure to 255.255.0.0

i am pretty sure its corrupted or infected firmware from factory. try hot plugging with/without the dfu or reset buttons pressed i think thats what i did to get mine to wake up and into dfu mode to flash finally

i had issues getting mine to wake up till i managed to flash it. now works flawless all the time. do you have any udev rules ? read somewhere they can corrupt system if not setup right. delete and reboot purge remove hackrf and gnuradio and all files for both remove anything to do with sdr and packages reboot autoremove and clean reboot then reinstall both through synaptic check for all the gnu radio and hack rf also check to see if its being detected in your system startup before you log in

can bluez (think thats what i was tryin) working and scanning in the pineapple and connecting to my gps but no data back yet.

i'd nuke the firmware and do a full reset with factory.bin in unbrick mode up,up,up,up,5down set your ip to 192.168.1.2 255.255.0.0 (instructions missing this) then nav to http://192.168.1.1

have several nh,neh,nhr nh is favs

was downloading update via web interface when both froze and became unresponsive for no reason on my end. so i let sit for about an hour or so to recover and nothing happens, reset power and booted up to bricks. both would start but would not load web ui properly. had black screen and no infusions at all but recon mode worked. one reset no probs the other one was bricked. the back end was there but it was like it was in a user mode with no permissions to execute anything including dip switch settings and have had a dozen spyware infections in firefox since getting the pineapples over the past few months.

bricked two pineapples updating this infusion a few days ago. one recovered nicely with dip switch reset config. the other had to be set into factory recover mode and reflashed with the factory.bin @ 192.168.1.1 the latter of the two was in very bad shape, dips switches werent working .i could ssh in and execute commands but nothing actually completed no reboots or nothing. it still took multiple tries to get the factory reset mode to work and finally take the actual firmware. other than that nice infusion

ive been trying to get a bluetooth dongle and gps combo working with no luck so far.

check your spelling compare the file names with the command strings. then play the sesamae street game " one of these things"

you and hundreds of others are having the issues. pretty sure its because of a bad firmware flash from the factory. i blowed up kali trying to get mine to work so i restored to a a few day old clonezilla image and everything started working again after i managed to reflash the hackrf afew times. your firmware has to match the hackrf package version you are using(Package/ Firmware Version: 2014.08.1) i also read somewhere where mossmann says the udev rule file can pollute some systems so i byassed that and not using this time round and am having hackrf joy joy without. use the following to update libhackrf and hackrf frimware. I had to boot up the gnuradio live cd to flash mine. i have always had a wierd thing that i re-flash things 3 times over when they arrive buggy to help burn in the firmware and to wake up the chip so to speak. open a terminal (ctrl+alt+t) git clone https://github.com/mossmann/hackrf.git cd hackrf/host/libhackrf/ mkdir build cd build cmake .. make sudo make install sudo ldconfig # can ignore this part copy /home/hackrf/host/libhackrf/53-hackrf.rules to /etc/udev/rules.d udevadm control --reload-rules # continue from here reboot open a terminal (ctrl+alt+t) cd /root/hackrf-2014.08.1/firmware-bin sudo hackrf_spiflash -w hackrf_one_usb_rom_to_ram.bin reset your hack rf cd .. cd .. cd firmware/cpld hackrf_cpldjtag -x default.xsvf reset your hack rf # i am a mutant wierdo and reflashed mine 3 times....both parts of the reflash 3x. hackrf_info Found HackRF board. Board ID Number: 2 (HackRF One) Firmware Version: 2014.08.1 Part ID Number: 0xa000cb3c 0x00694753 Serial Number: 0x00000000 0x00000000 also do an apt-get update and upgrade. there have been a few updates to the kali sdr packages over the past few weeks if thats what you are using.

and for no apparent reason hackrf stops being detected again.

blowed up kali and restored from a few day old back up. did a full kali install from apt-get and created a few rules to match the harware identifiers in .udev can now use my ubertooth and hackrf in kali but constantly get the 00000000000000's or buffer erors due to mhy computer sucking moose balls. so i reduced the sample rate waaaaay down and i can now get them both working reoutinely. still cannot use ubertooth with wispy spectrum analyzzer but can use it with all the ubertooth utils.

same prob with the ubertooth detects as openmoko in lsub and ubertooth in dmesg ubertooth will not work with kali out of the box either seems great scott gadgets needs to fix their driver and device signing

yup all installed correctly no broken dep's all updates and upgrades from kali repo's dmesg shows [19231.875505] usb 2-1: new high-speed USB device number 18 using ehci-pci [19232.008953] usb 2-1: New USB device found, idVendor=1d50, idProduct=6089 [19232.008970] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [19232.008978] usb 2-1: Product: HackRF One [19232.008985] usb 2-1: Manufacturer: Great Scott Gadgets [19232.011437] hackrf 2-1:1.0: Board ID: 02 [19232.011447] hackrf 2-1:1.0: Firmware version: 2014.08.1 [19232.012049] hackrf 2-1:1.0: Registered as swradio0 [19232.012058] hackrf 2-1:1.0: SDR API is still slightly experimental and functionality changes may follow lsusb shows Bus 002 Device 018: ID 1d50:6089 OpenMoko, Inc like i said does not wrk in windblows, kali or the sdr distro. its something to do with the firmware and its registering of the usb device string. clearly something borked in there if its registering as two different devices.

got mine working in kali linux by installing the realated software from synaptic ....just search for sdr or librtlsdr. should be a few there specifically named for the dongle you have.

anyone know how to get a new hackrf to actually work? hackrf tools and gnuradio all installed, followed hackrf tutorials for gnuradio etc. cant flash firmware, cant do anything with it. no worky in winxp, win7, kali or ubuntu sdr distro....device fails to initiate at boot on all. can install zadig drivers in windblowz but nothing works. get a short burst of what appears to be signal in the waterfall then it freezes up, no sound, no peaks to indicate channels etc. no matter what i try in kali all i get is errors, tried installing from apt,synaptic and from source ....nothin but FATAL: Failed to open HackRF device (-1000) HACKRF_ERROR_LIBUSB FATAL: Failed to open HackRF device (-5) HACKRF_ERROR_LIBUSB

nevermind...after a few reboots they started talking

guess i should add that i have 3 wlan on pineapple 1, one of wihch is a usb adapter that i want to dedicate to the internet connection and share the web to the network of pineapples.