BlackOp

For the avoidance of confusion I deliberately navigated to "Classic USB Rubber Ducky" forum I created, in that forum, a post titled "Firmware Downloads for "Classic Rubber Ducky" I asked a question specifically about firmware for "Classic Rubber Ducky" No, I do not intend to get firmware intended for "Classic Rubber Ducky" and flash it to "USB Rubber Ducky 3.0" I know I could have made it clearer but I was intoxicated, sleep deprived and under the influence of the dark forces enticing me to the dark side using gas plasma arcs 🤣 @dark_pyrro Thank you, I'll take a look at the links.

I would be grateful if someone could please point me to a location for firmware downloads for the Classic USB Rubber Ducky. I have looked extensively and found nothing. Thank you

I would be grateful if someone can please let me know, on the TETRA, which is the 5ghz radio- wlan0 (LHS with LED facing you) or wlan1? (RHS with LED facing you)? This one bit of basic information could be solved with a picture marked up with which antenna set is 5ghz and and which of the two operates as WLAN(n)-1.

I would be grateful if someone can please let me know, on the TETRA, which is the 5ghz radio- wlan0 (LHS with LED facing you) or wlan1? (RHS with LED facing you)?

I would be grateful if someone can please let me know, on the TETRA, which is the 5ghz radio- wlan0 (LHS with LED facing you) or wlan1? (RHS with LED facing you)?

Looked at and bought a LAN Turtle 3,G Arrived todayguide No instructions, no guide except for a short video on inserting SIM card. Even youtube appears devoid of Turtle 3G guide. All I can find is guides for normal LAN Turtle and pages about issues with the 3G version. More info on problems than how to use the 3G. Have I made an error in buying the 3G model?

Anyone know which 3G/4G/LTE USB Modem works with the Nano?

Infusions. yep. that worked Thank you. I've now upgraded to MAC 10.9 Mavericks and run up against Apple's silly change to ICS!!!! Grrrrr No fault of the Pineapple- it's all Apple !!! Will now revert to using Kali ICS inside a VM on the MAC. Wow, I though Apple was all about keeping things simple!

Thank you. Yep, used it through SSH shortly after posting the question. That's great. An infusion would be icing on the cake :-)

Is there a method for using Aircrack on the Pineapple. Could not see it included in infusions. I would like to demo WEP cracking using the Pineapple but it seems that may not be possible? Thanks

Found solution here: https://forums.hak5.org/index.php?/topic/33029-kali-wp5-tethering-fix/ Thank you Mr Protocol- Your suggestion may well work but the link above is also spot on ;-)

I want to have babies with you. Thanks. Been on this problem for 4 hours now. Awesome :-)

Hi. I followed the guide on http://wiki.wifipineapple.com/index.php/Internet_Connection_Sharing for Mac OSX and can connect to pineapple Mk V but no internet access. Before running the wp5.sh, Internet access was fine. I noticed after running the script that I got what looks like two error messages: SIOCDELRT: No such process SIOCADDRT: Network is unreachable .... After which it ( the script output) told me to browse to http://172.16.42.1:1471

Thank you. Will take up all that advice.

Well, I'd love to have the Pineapple as a robust wifi pen test tool. It's a great concept but I can only observe from only having used the Mark V. To be fair, out of the box the Pineapple Mk V worked 100% as advertised with my MacBook Pro OSX 10.7.something. No problems whatsoever using the Ethernet cable. My next step was to use client mode which was a bit slow to unusable. After many many hours/ days using client mode, I decided to revert back to ethernet cable connected to my macbook - which previously worked 100%. Now, despite the IP stack being up and running and the Ethernet. (Layer 1) showing as active, I cannot access 172.16.42.1:1471. I cannot see any change from the first successful installation/ connection So, another factory reset. Another because in client mode, it got so slow that things timed out. Only the factory reset restored functionality. Had to do this twice hence my decision to revert back to Ethernet cable connection. Factory reset also seems to mean losing infusions- this can be a pain. It would be useful to have an optional network settings factory reset.

Similar problem here. Mac OSX 10.7.something Manual IPV4 on Ethernet port 172.16.42.42, 255.255.255.0 broadcast Internet sharing wifi with Ethernet port Attempting to connect to http ://172.16.42.1:1471 It used to work but now does not. No apparent rhyme or reason. When it did work, I decided to use client (wifi, wlan1) mode instead of wired Ethernet. That was ultimately slow and flaky. Decided to go back to Ethernet cable but now it fails to connect. I have to connect to the pineapple AP to get the pineapple interface but then infusions all hang. I'm on my third factory reset which resolves network connectivity issues.

Trying not to be disappointed with the Pineapple Mk V working with my MacBook Pro. Clearly a massive amount of effort has gone into the unit. I plan to demo it to a UK police force in coming months, so I must master it. Would it it be possible to get a reset of network settings in addition to a Big Bang type of reset? Would save a lot of faffing around. Getting the pineapple Mk V working with Kali Linux VM on my macbook is my next goal :-)

I get a bit confused with the monitor interface concept. When using deauth, when I stop and start the monitor, a new monitor interface is created. I then don't know which Mon interface to use. Would be handy to an explanation of how monitor interfaces are created and why new ones appear when using death.

I set up client mode (wlan1) on a tethered wifi link to my iphone 4s( iOS7) using Ch6 Problem is if the wifi LAN (wlan0) I'm interested in is also on Ch6, how can I change Ch on the tethered client mode (wlan1) link?

I tethered my 3G iPhone 4s on IOS 7.1.1 via wifi using personal hotspot on the phone and the pineapple client mode on wlan1. The Pineapple then had access to the internet through the phone's 3G. I was then able to joint the phone's personal hot spot with my iPad . I used the iPad to connect to the Pineapple Mk V and managed to use the Pineapple. No mods. Just worked.

I tethered my 3G iPhone 4s on IOS 7.1.1 via wifi using personal hotspot on the phone and the pineapple client mode on wlan1. The Pineapple then had access to the internet through the phone's 3G. I was then able to joint the phone's personal hot spot with my iPad . I used the iPad to connect to the Pineapple Mk V and managed to use the Pineapple. No mods. Just worked.

I have the same question ditto!

I want use an iPad to monitor real time pcap capture using an IOS app called Pcap Touch. For that to work I need to set up the pcap-touch-server on the pineapple. Can this be done? Do I need to creat an infusion to access the pcap touch server?

Thank you for clearing that up. I know understand So, can I insert a new MicroSD card into the Pineapple and format it ready to install infusions? I assume the boot process does not rely on the SD card?