ARDETROYA

Whistle Master you are the best ;)! thanx for the infusion

I replaced it too, and I had problems with the SD card after the upgrade.

Well in my experience i didn´t have any problem except with the stability updating to 2.0.X but i solved it by a reformat. where did you find that the pienapple appears to break SD´s? did you shaw it versions unfer the version 2.0.0?

The fstab look´s like mine (I´m in version 2.0.3 and my pienapple looks stable) Did you try to format it on your PC first?

hey damavox thanks for the suggestion and for the read. I know it´s possible but I do not know how to program it. So thats why I decided to post it as an infusion Idea. LOL if you write it you can name it the way you want

Hi all, It would be great to have some to have an infusion that acts as a NIDS but instead of searching for network traces it would be searching for MAC addresses. So it will act as a MacHunter searching for those MACs (clients) that are "jumping" betten diferent WIFIs (SSIDs) so we would have a lot of information about the objective. A database between networks (SSID and ESID) and MACs (clients) would be very interesting. What do you think? Someone can build a MacHunter?!? ;)

That woud be great.. As a Software Quality Assurance it´s great to learn "How To"´s with examples (It´s hard to know all the diferent programing languages but not that hard to understand it)

He did. I have talked with him. The problem seems to be that the Ethernet port does not respond. As my point of view, it´s a hardware problem.

SSLSplit do not support HSTS. Main pages as Facebook, Hotmail, Twitter.. etc are not going to alow to stablis a conection so you can not sniff the password. It would be usefull for SSL aplications that require username/password as IMAP for example.

So what´s the configuration that you are using? Need to know to test it on my pineapple. I just test it with and worked fine for me: Karma: Enable PineAP: Enable Hardvester: Enable (the other options are disable)

Great work! i love the new implementations and I can´t wait for the future updates!

Thanks ZaraByte!

Please be sure that you try this before opening a new post: 1. Use the Recovery Web Interface (PINS 11110) (factory 1.2) chaging your network configuration (Pineapple = 192.18.1.1/24 PC/Expensive PC(Mac)= 192.168.1.2/24) 2. Boot with regular PIN Configuration (PINS 11111). (Pineapple =172.16.42.1/24 PC/Expensive PC(Mac)=172.16.42.42/24) 3. Format SD card. (Into the Resources Infusion ==> USB Info ==> Format SD Card - (Experimental)) 4. Check that all the infusions and services are down. 4. Upgrade to verison 2.0.2 5. Format SD card (Into the Resources Infusion ==> USB Info ==> Format SD Card - (Experimental)) 6. Install again the infusions.

It´s available ;) Thanks EDIT: I can not make it run. In the Large title the "Data Base on SD" do not install (or each time I get out of the infusion and Back In the system displays that the DB it´s not installed. On the other hand i do not get any information. Only when I run Karmaclients.sh by ssh I do get the MAC address of the device conected (Nexus 7) and after a little this information desapears from the list.

Cool! I´m sure someting it´s hapening with the SD´s used in earlier versions...

Did you try the Recovery Web Interface or the Resseting System Defaults? Did you use the SD cards in earlier versions? I recomend to "Set eveithing to 0" to be sure that everiting it´s ok: 1. Use the Recovery Web Interface (PINS 11110) (factory 1.2) chaging your network configuration (Pineapple = 192.18.1.1/24 PC/Expensive PC(Mac)= 192.168.1.2/24) 2. Boot with regular PIN Configuration (PINS 11111). (Pineapple =172.16.42.1/24 PC/Expensive PC(Mac)=172.16.42.42/24) 3. Format SD card. (Into the Resources Infusion ==> USB Info ==> Format SD Card - (Experimental)) 4. Check that all the infusions and services are down. 4. Upgrade to verison 2.0.2 5. Format SD card (Into the Resources Infusion ==> USB Info ==> Format SD Card - (Experimental))

As I told in another post... I had some problems with the infusions using the SD card that i where using with the earlier versions, so i decident to format it again. After that i haven´t had any problems. Don´t know if it will wok for you, i´m just giving you an idea if you do not mind losing your data (at least that you do backup of it ;) ) Wishtle Master: Seems that the SD used in the earlyer versions do create stability problems (slows the pineapple or reboots). As i saw, it´s seems that everiting gets ok after formating the SD card. https://forums.hak5.org/index.php?/topic/33289-my-wifi-pineapple-keeps-rebooting-after-its-been-on-for-2-5-minutes-on-the-200-firmware/ https://forums.hak5.org/index.php?/topic/33322-cannot-install-any-infusions-to-sd-card-after-upgrade-to-202/

Cooper, Thanks to explain it that well.

Thanx...

I keep seen get 1.3. I can install it but it dosen´t let me install de DataBase in tne SD card. Any light on this?

Cool ;)

Into the Resources Infusion ==> USB Info ==> Format SD Card - (Experimental) Format the Sd card and fash the pineapple with the Recovery web Interface (rememer tu use the Factory Image 1.2 not the update image 1.2)

Something similar happens to me: I placed an order on the 30th (and received the tracking number) with the USPS for an international shipment and the order just displays that there has been a Pre-Shipment Info Sent to USPS, at this point the package hasn´t been shiped. I hope that the order arrives like the web page said form (7 to 30 Business Days). where is my package??! why it isn´t sent??!?