Jump to content

repzeroworld

Active Members
  • Posts

    26
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by repzeroworld

  1. I'd like to try the macchanger script do post download link when finished ..
  2. I have changed all url downloaded links below is the new link http://www56.zippyshare.com/v/UZrMxTtZ/file.html
  3. give some details on 1. the reaver command line you are using 2. The chipset of your wifi card (try "airmon-ng") 3. Have you bringing wlan0 down and when using the card in monitor interface? 4. check to see what channel the victim is on (try running an airodump-ng scan or using wash)..it could be that you are on the wrong channel expecting to get a beacons
  4. thanks datahead and velkrosmask when running your adapter in monitor mode check to see if there are any program such as network managers that automatically bring your wireless adapter interface up. New wifi drivers does not allow you to use your adapter in monitor mode while your wireless interface is up..I think there are patches for drivers around.....however the script executes a piece of code several times to bring your wireless interface down in order to use your monitor interface. Also, probably you can try not to put a channel number so that your adapter can adjust itself to hoping channels to find the right channel the target is on. :D
  5. I see your point...I downloaded the modified script done by OE 800..:)...a few patches for it to work with MarkV is not bad..lol... what terminal emulators except tmux is supported in MarkV? :) I will see what i can do...
  6. seems a little technical for me AT THIS POINT but you are looking to embedd the program into a device?.. a little more details would be good :D
  7. ****************ReVdK3-r2 (Revision 2)******************************** Download Link http://www56.zippyshare.com/v/UZrMxTtZ/file.html I have revised the script for those who prefer to use bully wps pin cracker. Now you have two options for pin cracking either reaver 1.4 or bully Dependency checks: the program checks to see if you have the following are installed so that the script can function well [1] reaver [2] bully (if you are using) [3] mdk3 [4] aireplay-ng [5] gnome-terminal [5] timeout Possbily the last revision of the script since new access points are getting invulnerable to the attacks...however i will experiment new attacks and see if they are effective for rebooting APs ..best of luck ReVdK3 users!.. Credit to my friend WaLkZ and others who prefer bully wps pin cracker
  8. I am working on incorporating bully in revdk3 script (95% completed)....I notice mac spoofing is affecting proper functioning of bully as compared to reaver... a little scared of this (still thinking...).
  9. I am dreaming about the awus051nh due to reviews on amazon.com..Also i think a ralink adapter like this with low wattage will improve reception (signal quality) better as compared to the 2W adapter. Will be purchasing two of these soon.
  10. NEW HACKER GROUP- not a bad idea... However, it would be best to know who you are dealing with first before creating the group...you can learn about their skill levels by simpling reading their posts and then make decisions whether or not to add them to the group..I think the group should be made secretly and not open to the public like this forum for anyone to join in a jiffy....hackers (ethical and unethical) should also try to protect their identity and group they are associated with. I recently read an article where th FBI can track all your browsing history and even turn on your camera without even you knowing (however the article did not say what they are using to do all these stuff and their organizational network). So be careful my friends!
  11. RELEASE OF ADSTAR WORDLIST GENERATOR V1.2 DOWNLOAD LINK http://www52.zippyshare.com/v/89300952/file.html WHAT'S NEW? adstar wordlist generator v1.1 was rewritten in the shortest codes I can think of thereby making it very efficient than adstar v1.1. This version have a touch of humanity with the following options: 1. Detect whether the process of creating a dictionary or even piping to stdout in a linux terminal is being interrupted (Ctrl-C) and resume this process. . Nevertheless, the main limitation to the resumption of a broken process is that resuming from 1 billion or more keys tried will not start the resumption process instantly ( few seconds for 1 billion keys). 2.There is a new option for splitting large dictionary files into smaller chunks. 3. Some bug fixes were also implemented. NOTE: A "How to install and use" file goes in depth with easy to follow screenshot examples.
  12. hmm...i was able to input some lengthy codes into adstar wordlist generator.. These codes focuse on: 1. Resuming adstar wordlist generator when piping - detecting the previous command line used for piping and resuming the process once the user agreed to it.This only works once the user input the exact command line to resume the process..word length, string, repeat character, beginning of word , end of word arguments 2. Detecting and Resumming the process of creating MULTIPLE wordlist files (if they were interrupted) the major difficulty was trying to resume a python generator function AFTER THE PROGRAM QUIT /EXIT... after some serious thoughts and i found a way around this... I will release some this new version after i add another option.....can't wait to finish perfecting this program while focusing on simplicity
  13. I will see if i can make a Graphical user window (with options) for the generator and a snapshot window to show when words are created prior to being stored in the file (this will be a seperate program and will not run in terminal)...this may take sometime.....
  14. HOW TO USE ADSTAR WORDLIST GENERATOR (VIDEO BY JAY DEE) video link https://www.youtube.com/watch?v=5qXc26ZRjD0
  15. A wordlist generator that I have been working on but finally got the time to finish it...i might think of adding some more features if i have enough time. adstar v1.0 wordlist generator. Created by: repzeroworld Download Link: http://www52.zippyshare.com/v/89300952/file.html optional arguments: -h, --help show this help message and exit -o [OUTPUT_PATH] Path to output wordlist. -o without a value will result in output to terminal. -b BEGINING_OF_WORD example '-b repzero' will place 'repzero' at the beginning of each word generated' -e END_OF_WORD example '-e repzero' will place 'repzero' at the end of each word generated. -r REPEAT_A_CHARACTER no. of times to repeat a character,e.g, '-r 2' will generate all combination of words INCLUDING words with each character being repeated a maximum of 2 times. Mandatory/Required Arguments: -s STRING string of characters to make wordlist from,EXAMPLE1:'-s abcd' will generate a wordlist containing characters'a','b','c' 'and' 'd'.EXAMPLE2:'-s 'my name is repzero'' will generate all combinations with the strings 'my', 'name', 'is' and 'repzero'. -l WORD_LENGTH length of words in word in wordlist,EXAMPLE: '-l 4' will generate words that are 4 characters in length ONLY
  16. hello 100j download script and type in a linux terminal chmod a+x <drag script here> afterwords just drag script into a terminal this is a bash script....i am thinking to write script in python..but i will leave it in bash codes for a while.... cheers
  17. RELEASE OF REVDK3-R1.sh DOWNLOAD LINK http://www32.zippyshare.com/v/12811261/file.html ---------------------------------------- ReVdK3-r1.sh (Revision 1 README Section | --------------------------------------------------------------------------------------------- WARNING: | Do not use this script without permission from the victim to carry out the specified attacks. | | This is the first offical revision of ReVdK3.sh script | ---------------------------------------------------------------------------------------------- Script features in this revision 1. Runs reaver,aireplay-ng in one terminal and detects continously when reaver is rate limiting pins. After input of wireless adapter interface..it checks to see if there are any monitor interfaces on that adapter interface. Any existing monitor interfaces are wiped out and three new monitor interfaces are created. The script also uses these interface during the attacking process. In the event that aireplay times out because association issues or switches to "shared key open authentication", the script will re-run aireplay-ng. 2. Runs mdk3 attacks until reaver detects that the WPS state of the AP has been unlocked. Once WPS has been unlocked it kills all mdk3 attacks and waits until reaver detects WPS has been locked again..this process goes on... 3. Upon detection of 25 successive EAPOL start failures, the script floods the AP for 60 second to see if the AP will do a fresh reboot! 4. Killing the script in a terminal will trigger it to remove all tmp files, force all processes started by the script to terminate and wiping out the three monitor interfaces it created..be patient about 1-2 seconds for termination of the script...Also you call close the terminal instead of killing this will send a hang up signal to do the necessary cleaning up..
  18. hello zezadas, i checked out the link below of the netsys 9000wn http://www.dx.com/p/netsys-9000wn-6800mw-802-11b-g-n-150mbps-usb-2-0-wireless-network-adapter-white-123377 according to the details (which i do not know if it is actually true because of all the misleading information on new wireless adapter these days) the adapter has a ralink 3070L chipset which works excellent with linux especially packet injection..it also appears that the adapter is for indoor purposes only since antenna is not detachable..if you like this device probably you can take the chance...if you want to purchase an adapter that is well tested by others..probably you can try one of the alfa wifi adapters with a ralink or atheros chipset...or you can try other adapters that are well tested in linux (hint: do some browsing on some well tested linux wireless adapters by other users.. )
  19. I am currently using a 5w 37dBm indoor wifi amp. (no model/brand..took a chance in buying....manufactured in china..) noise level <=3dB (it's okay i guess)..purchase price US$60 (very cheap).decided to purchase this amp after my alfa 2W amplifier died after a couple of months when connected directly to the antenna outdoor (moderate weather conditions)....picks up more AP than previous 2W amp since it is 5W...this amp can boil a pot of water..... but it is screwed to my wall (in open air)....no problems with this amp since a year now.....if you purchase any do let me know how it works..i like trying new devices..lol....
  20. hello Romanvanloo, There are different forms of man in the middle attack...this form of man in the middle attack does not guarantee all tcp packets will be forwarded to your device, that is,using arpsoof will not guarantee that tcp all packets from all users will be forwarded to your device...what arpspoof does is send out ARP packets to tell others that you are the true gateway to the internet so that they can initiate a tcp connection which will redirected to your browser (port 1000 or 8080 by default depending on which version of sslstrip you are using)..also the Access Point that is the true gateway will also be sending out ARP packets stating that it is the true gateway...eventually the network will be unstable at times.... some tcp packets will be sent to your device while other packet will be sent to the true gateway.....sslstript must be used to issue a fake key and certificate but somehow it does not work well after you left it for a while to capture ( i don't know why) ..... however sslstrip and ettercap is a perfect combination..just leave it to capture for a while you will see you will have SOME sort of success!:)
  21. I have the following adapters connected to a 40 feet outdoor antenna with an indoor 5W wifi amplifier 1.AWUS036NH Good packet injecter Strong Signal Strength for most AP Connects to most access points Was not able to connect to some access points despite excellent signal strength Generates alot of heat about 20-25 AP detected with direct connection to amplifier (no cabling) plug n play in kali and bt 5 r3 2.AWUS036NHA excellent packet injecter most access points had moderate signal strength but was able to connect to Most AP that had weak signals (-91dBm) Generates less heat Works well with a 5W wifi amplifier about 26-31 AP detected with direct connection to amplifier (no cabling) plug n play in kali and bt 5 r3 3.TP-LINK WN 722N (USB) needs to be connected directly to an antenna, cabling between adapter and amplifier seems to affect how much APs is detected recently bought an rp-sma to sma adapter for direct connection that is, no cabling, was able to pick up about 15-18 AP detected with direct connection to amplifier (no cabling) WITH CABLING between adapter and amp 2-3 AP dectected! plug n play in kali and bt 5 r3 4. COMFAST (AR9271) USB DONGLE ( made in china?!) my special buddy..better than all of the above... excellent packet injector than all of the above!.. i am amazed how fast this adapter hops channel when using reaver without a channel option picked up the same no. of AP as the awuso36nha and also connects well to APs that had week signals (as weak as -96dbm!) plug n play in kali and bt 5 r3
  22. you mean to the "source" reaver?..that seems like a great idea!..hope they do that someday :)
×
×
  • Create New...