Jump to content

cheeto

Dedicated Members
  • Posts

    721
  • Joined

  • Last visited

  • Days Won

    9

Everything posted by cheeto

  1. Thanks for the heads up Ra0r. I will test it tonight and get back to you!! Thanks!!!! steve
  2. I'm as lost as Shmgsy, perhaps even more. I tried some of the things you mentioned but no luck.
  3. Figured it out. Mark v and Reaver only work on WLAN0. Is this normal? I'll make a small video tutorial on a step by step method for newbies like myself. (coming soon) Cheers
  4. Hey guys, Are any of you having any success with Mark 5´s reaver? I´m not. Here´s what I´m doing: GO TO THE WPS menu 1: Start monitor mode wlan1 2: start mon0 3: Refresh AP´s 4: Select target 5: In the general tab, I select mon0 hit start then I get this after a while: wps log_1401144578.log [May 26 2014 23:46:52] [+] Waiting for beacon from C8:xx:xx:xx:xx:xx [!] WARNING: Failed to associate with C8:xx:xx:xx:xx:xx (ESSID: xxxxxxxx) [!] WARNING: Failed to associate with C8:xx:xx:xx:xx:xx (ESSID: xxxxxxxx) [!] WARNING: Failed to associate with C8:xx:xx:xx:xx:xx (ESSID: xxxxxxxx) [!] WARNING: Failed to associate with C8:xx:xx:xx:xx:xx (ESSID: xxxxxxxx) [!] WARNING: Failed to associate with C8:xx:xx:xx:xx:xx (ESSID: xxxxxxxx) [!] WARNING: Failed to associate with C8:xx:xx:xx:xx:xx (ESSID: xxxxxxxx) [!] WARNING: Failed to associate with C8:xx:xx:xx:xx:xx (ESSID: xxxxxxxx) I placed an X over the mac and ssid. But anyway, I want to mention that I did unlock this AP with KAli. So I know it can be done. Can anyone give me a hand on this one. Thanks guys, cheeto
  5. i didn't even try using it at the airport, but was tempted when they only assign 30 min internet access. I think by changing the mac (with the pineapple) it would have worked for more time.
  6. Good news too. I took an international flight yesterday and had absolutely no problems whatsoever. No questions, nothing at all. Cheers
  7. Thanks SEB. Do you think Ettercap infusion might do the trick? Or should i look into the "Arping" infusion? Cheers and THANKS!!
  8. Hey guys I've been reading some threads on SSLSTRIP but can't figure out where im going wrong. Here is the scenario: Step 1: open pineapple menu and Go to "netwok" Step 2: select "Client mode" Step 3: Select "Interface wlan1" & select scan Step 4: Select my wifi HOME router's ssid and succesfully connect MKV to my HOME router. Step 5: return to main menu and Select Sslstrip (select start) If I connect to my Pineapple's AP I can successfully get sslstrip to work. BUT what I'm trying to do is: Sslstrip from my HOME AP and not my Pineapple AP. Is that possible? I've done this before with Kali so I'm sure it's possible with MKV. Thanks guys!!!
  9. Hey guys great topic. I'm going to be flying soon as well. I would assume that it would be a good idea to drain the battery before putting it in your carry on. If they need to plug it in and verify that all is working well, then I actually agree with that security measure. Cheers,
  10. really? Now that's what i call a fast update! Thx.
  11. Hi, I connected it with Wifi (client mode) and was able to finally update the firmware after several disconnects. Thanks!!
  12. Thanks for getting back to me Seb. I let the Mk5 sit there for about an hour and nothing was happening. So I unplugged it and tried it again and it WORKED. THANKS!!! One last thing, I rebooted and inserted my new class 10 sd card. (formatted in fat 32) I successfully connected via wifi and tried to perform a firmware update (over the air). The problem is that it keeps disconnecting. Do you recommend that i do this with ethernet? Cheers, cheeto
  13. Thanks Seb! Unfortunately my Mk5 is bricked. :( It's been plugged in for over 25 min and all I see are the following lights: GREEN PURPLE RED. There is absolutely no blinking whatsoever. Can i assume that it is bricked? Regarding the unbricking file "Factory 1.2.0.bin. It does not contain a mdk file. Can i just dump that on my class 10 sd card? (and of course, follow the instructions from there? thanks guys
  14. Hi guys, I finally got my hands on my Mk5. Prior to receiving it, I had been doing a lot of reading on the forum. Although I have not turned it on yet, I took the advice of several users on this forum and went out and bought a class 10 SD card. Doubt : I downloaded the 1.3 firmware but it is only composed of 1 file whereas the stock firmware that was included in the original firmware has 2 files. Should I copy the stock firmware onto my new SD card and later update from the pineapple menu? Or can I just copy the 1.3 firmware to my new class 10 SD and update upon my first boot. As a side note, I formated my new SD card with my pc in fat32 mode. Doubt: Will it be necessary to connect my mk5 to my pc's ethernet or can I connect to my router? Sorry for these questions but I know that the initial boot is critical. Thanks guys!, Cheeto
  15. Nothing to split hairs over. Use the product as you may.
  16. Thanks Seb. It's a good point you brought up for us newbies. It's silly limiting a purchase of a fine antenna because of the connector. I bought 2 SMA Male Jack to RP-SMA Female Adapter from the Hakstore. http://hakshop.myshopify.com/products/sma-male-jack-to-rp-sma-female-adapter Cheers!
  17. Hi guys, If it's rp-sma, can't you just get an adapter to convert it to sma? Also, I would assime that some hardware stores could make a custom sma cable to adapt to any WiFi antenna. Am I wrong on this one? Cheers
  18. Thanks raz0r, I've seen most of Chris' videos. Hands down the best tutorials out there. I wonder if the users, who are having problems with karma, have watched this video? It's pretty straight forward. Easy for me say since I'm yet to have my Pineapple. :) (coming really soon) cheers, cheeto
  19. Hi guys, I will be receiving my mkv very soon. Really excited!! Anyway in reading the topics on the forum, I see that many users are having troubles with Karma. Could some, who knows how to use Karma, make a video tutorial on how to use it? I think it would help many of us users. Cheers, Cheeto
  20. Many thanks for sharing your experience with your Pineapple. I will soon have my hands on one as well. Regarding the Unbuntu Server, I did the same as you. Partitioned my Win 7 and made it dual boot with Unbuntu Server. I followed Chris' tutorial up to the point where i needed the MK V. An idea would be to have a VIDEO manual of the infusions. How they are used etc.. As soon as i get mine and If I get the hang of it, I'll make some. cheers, cheeto
  21. Fanbase, I went ahead and followed Chris’ tutorial. It’s very well explained. I partitioned my netbook and installed Windows 7 and Ubuntu server. With Chris’ tutorial I successfully have the ssh ready to go. All I need now is my Pineapple to arrive. J Cheers, cheeto
  22. Xcellerator, I think I finally figured out Reaver. 1 last question and no more, When i use: wash -i mon0 and i suddenly see a list of AP. Are the ones that they "locked = NO" crackable? Thanks man!
  23. Thanks Xcellerator, I really appreciate the tips. I’ve been using WIFIslax 4.8 for WEP cracking, with no problem. In addition it has a fantastic script called “YAMAS”. Highly recommended. Anyway, I started experimenting with Kali. When trying to attack routers with WPA wps Enabled, it locks me out after the 2nd or 3rd pin. (Just like you mentioned in your previous post) I’ve tried many things like time delaying in order to avoid lock outs but I have never been successful. It might be my Antenna. (TP-LINK TL-WN7200ND). For what I read it’s about a 10 hour process. For this reason I’m placing my bet on the Pineapple. Thanks!!! ps. I will take your advice and look into 4 way handshakes.
×
×
  • Create New...