Jump to content

cheeto

Dedicated Members
  • Posts

    721
  • Joined

  • Last visited

  • Days Won

    9

Everything posted by cheeto

  1. Thanks for jumping in Foxtrot. I did the "opkg update" and that enabled me to run the cat command (cat /etc/config/wireless). Unfortunately I couldn't run the 2nd cat command (cat /etc/hostapd.conf) I was able to finally install "iperf" Here is the "cat /etc/config/wireless" readings: Thanks guys root@Pineapple:~# cat /etc/config/wireless config wifi-device 'radio0' option type 'mac80211' option channel '11' option hwmode '11g' option path 'platform/ar933x_wmac' option htmode 'HT20' config wifi-iface option device 'radio0' option network 'lan' option mode 'ap' option maxassoc '100' option encryption 'none' option ssid 'TEST WiFi' option hidden '0' config wifi-iface option device 'radio0' option network 'lan' option mode 'ap' option ssid 'Management' option encryption 'psk2+ccmp' option key 'pineapplesareyummy' option disabled '1' option hidden '0' config wifi-device 'radio1' option type 'mac80211' option channel '11' option hwmode '11g' option path 'platform/ehci-platform/usb1/1-1/1-1.1/1-1.1:1.0' option htmode 'HT20' config wifi-iface option device 'radio1' option ifname 'wlan1' option mode 'sta' option network 'lan' option ssid '0' option encryption 'none' option key '0' config wifi-device 'radio2' option type 'mac80211' option channel '11' option hwmode '11g' option path 'platform/ehci-platform/usb1/1-1/1-1.3/1-1.3:1.0' option htmode 'HT20' config wifi-iface option device 'radio2' option ifname 'wlan2' option mode 'sta' option network 'wwan' option ssid 'Linksys' option encryption 'psk-mixed+ccmp+tkip' option key '20012010'
  2. root@Pineapple:~# opkg install iperf Unknown package 'iperf'. Collected errors: * opkg_install_cmd: Cannot install package iperf.
  3. thanks again for getting back to me. Unfortunately "Cat /etc/config/wireless" doesn't work. Is this normal? thanks, root@Pineapple:~# cat /etc/config/wireless cat: can't open '/etc/config/wireless': No such file or directory root@Pineapple:~#
  4. Thanks but I'm still getting error after error while in putty mode: root@Pineapple:~# uci get wireless.radio0.require_mode uci: Entry not found root@Pineapple:~# uci get wireless.radio1.require_mode uci: Entry not found root@Pineapple:~# root@Pineapple:~# uci get wireless.radio0-1.require_mode uci: Parse error I think it's not recognizing the command. Please keep in mind that i don't have iperf installed on my nano, i do however have installed on my phone. thanks
  5. I tried installing iperf but failed. I used these commands: apt-get install iperf yum install iperf emerge iperf but nothing worked. I also tried: root@Pineapple:~# /dev/null: No such file or directory -ash: /dev/null:: not found and didn't work as well. ? I guess it's a hardware issue. I'll be forced to use WLAN1 instead of WLAN2. This is too bad because I will not be able to benefit from PineAP. Thanks
  6. Thanks for jumping in "Just_a_User" Look, I understand that my nano's speed could be slower, but this is pretty bad. The picture describes everything. These are the results i get when using WLAN1. When using wlan2 it's even slower.
  7. TEST 4: I connected my nano's client mode to my Cell phones OPEN (no password) wifi network and it still has problems: root@Pineapple:~# iwconfig wlan2 wlan2 IEEE 802.11bgn ESSID:"Admin" Mode:Managed Frequency:2.412 GHz Access Point: D0:31:69:17:3C:77 Bit Rate=1 Mb/s Tx-Power=20 dBm RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=65/70 Signal level=-45 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:59 Invalid misc:70 Missed beacon:0 Still very slow. ?
  8. I'm noticing that I can't disble "n"
  9. i did a third est and i got: root@Pineapple:~# iwconfig wlan2 wlan2 IEEE 802.11bgn ESSID:"Linksys" Mode:Managed Frequency:2.412 GHz Access Point: 50:C7:BF:DE:C6:5B Bit Rate=1 Mb/s Tx-Power=30 dBm RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=57/70 Signal level=-53 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:5037 Invalid misc:143 Missed beacon:0 speed test results: 4.2mb
  10. OK I changed the hotspot like you said and disabled wireless n Here are the results oF wlan 2 root@Pineapple:~# iwconfig wlan2 wlan2 IEEE 802.11bgn ESSID:"Linksys" Mode:Managed Frequency:2.412 GHz Access Point: 50:C7:BF:DE:C6:5B Bit Rate=1 Mb/s Tx-Power=30 dBm RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=55/70 Signal level=-55 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:15 Invalid misc:12 Missed beacon:0 I did a speed test and got 8.5mb It is a little better but still lagging. Again, Wlan2 is clearly the issue. thanks
  11. Here you go: root@Pineapple:~# iwconfig wlan2 wlan2 IEEE 802.11bgn ESSID:"Linksys" Mode:Managed Frequency:2.412 GHz Access Point: 50:C7:BF:DE:C6:5B Bit Rate=1 Mb/s Tx-Power=30 dBm RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=53/70 Signal level=-57 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:2431 Invalid misc:158 Missed beacon:0 root@Pineapple:~# iwconfig wlan1 wlan1 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm RTS thr:off Fragment thr:off Encryption key:off Power Management:off
  12. Hi i8igmac and many thanks for getting back to me!! That was really fast. At this time at work however, before leaving home I did some more experimenting and I think I’m getting somewhere. 1) I’m connecting my nano to my wifi network with WLAN2. My USB radio is an “Alfa” that I also purchased from Hak5. I also tried an alternative usb radio that was also purchased from “Hak5” & in both cases the speed was EXTREEMLY SLOW. 2) I disconnected my usb radio on my Nano and connected to my wifi network & it works very good when connecting to my router with WLAN1. The speed seems to be normal again. *If I try to connect with wlan1 to my router while having a usb radio (Wlan2) connected to the Nano, the speed is VERY SLOW. Conclusion: My Nano’s problem is clearly WLAN2. Is there anything I can do to fix it? 3) Regarding Iperf, I went ahead and installed it on my phone. I’m going to look into how to install it on my nano. If it’s on Github, I think I’ll be able to install it. Not too diffent than adding files on Kali Linux. br-lan Link encap:Ethernet HWaddr 00:C0:CA:8F:9E:44 inet addr:172.16.42.1 Bcast:172.16.42.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1430 errors:0 dropped:75 overruns:0 frame:0 TX packets:1653 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:268924 (262.6 KiB) TX bytes:1393735 (1.3 MiB) eth0 Link encap:Ethernet HWaddr 00:C0:CA:8F:9E:44 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:4 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:25 errors:0 dropped:0 overruns:0 frame:0 TX packets:25 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2213 (2.1 KiB) TX bytes:2213 (2.1 KiB) wlan0 Link encap:Ethernet HWaddr 00:C0:CA:8F:6F:93 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1457 errors:0 dropped:0 overruns:0 frame:0 TX packets:1859 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:296100 (289.1 KiB) TX bytes:1454714 (1.3 MiB) wlan0-1 Link encap:Ethernet HWaddr 02:C0:CA:8F:6F:93 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:217 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:28903 (28.2 KiB) wlan1 Link encap:Ethernet HWaddr 00:C0:CA:8F:87:CF UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan2 Link encap:Ethernet HWaddr 00:13:EF:C2:09:C3 inet addr:192.168.1.125 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:923 errors:0 dropped:9 overruns:0 frame:0 TX packets:877 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:392658 (383.4 KiB) TX bytes:206596 (201.7 KiB) Thanks again
  13. Hi folks, I'm having the following issue with my nano. I'm currently using it in CLIENT mode. So I feed it internet thru my wifi router connection. When a client connects to the nano, the internet connection is REALLY SLOW. MAX download speed is 5mb. If I connect directly to my WIFI i get 50mb. (HUGE DIFFERENCE) Test 2: Instead of feeding the Nano internet thu my Wifi network, I'm feeding it from my cell phone's hotspot. Again, the nano top download speed is 2mb If i connect my laptop to my phone's hotspot I get 10mb. (HUGE DIFFERENCE) Ok, so at this point there is an obvious problem with my nano. So I RESET it and nothing changed. I downgraded to firmware version 2.1.0 and nothing changed. I swapped antennas and again no change. I changed power source from battery to a Samsung phone charger. no change. Can someone PLEASE give me a suggestion? Thanks!
  14. i was just checking the price on ebay..... like $80 usd or so...... OUCH!
  15. Many thanks for your feedback, so you suggest i get "AWUS051NH "? Cheers
  16. Hey guys, I'm looking into buying a dual band radio. I know that 5ghz radio will not work on the Nano however, I'd like to use this radio for both the nano and Kali. So what I'm looking for is a radio that I could use for pentesting in 2.4 & 5 ghz. Any suggestions? Thanks
  17. hey guys, the new firmware update somehow disables credentials captured that appear in the GUI. They are being captured but not displayed in the GUI. Any fix to this? Cheers
  18. Thanks for all the effort you guys put into this. I'm upgrading now now!
  19. Hey Foxtrot. I'm referring to client mode. The network module does not allow you to manually enter an ssid. Instead we have to scan and select from the drop down menu. ( I'm trying to feed my nano internet from a hidden ssid.) Thanks
  20. Hi folks, Just wondering if a future version of the firmware will support hidden ssid? I manually placed my ssid and password in the etc/config/wireless file. Unfortunately that didn't work. Just some food for thought. Cheers
  21. You're the man to do it!!! It's by far the best module I've ever seen!!
  22. The reason is that you need to issue SSL certificates. (at least as far as i know) Hopefully this will be available in the future. This is possible to do with FLUXION. The client can't steer away from a captive portal until the clients complies with he portal's requirements.
  23. Hey guys, does anyone know if future a EP module will issue ssl certificates? (sort of like Fluxion) Cheers
  24. Thanks for keeping us in the loop! I opt to wait for the official release. thanks again!
×
×
  • Create New...