Jump to content

nabs

Active Members
  • Posts

    29
  • Joined

  • Last visited

  • Days Won

    2

Posts posted by nabs

  1. Hello, I've been playing around with the nano for a few days. Install was easy, sharing the internet connection was easy thanks to Darren's youtube tutorial (big thumps up and looking forward to more video's). But after a few days the nano lost internet connection. No settings where changed. Even a reset (or a few resets) didn't do it. It works on another pc so still looking to fix it.

    Second problem: after a few hours the menu's gone. Totaly blanc. The nano works but no menu.

    Third problem. I installed a lot of modules on the nano (not on the sd card) when it was full I've put in a sd card and tried to remove some modules. I get the message that they are succesfully removed but they are still in the list.

    I do get a lot of ssid's in the pool so it works, I get clients so that works.

    Still a little question. I want to capture the traffic so I installed tcpdump. But what interface should I select when I use the shared internet from my pc? Io, Wlan0-1, wlan0, eth0, wlan1mon or br-lan?

    Thanks for your time!

    • Like 1
  2. Thx for the fast reply. I understand what you mean but this would only work if you stay with the same AP.

    For example. I configure my pineapple for the provider's hotspots. I can connect to it at home but when I go out and take the pineapple with me the pineapple will connect somewhere else to the same hotspot as the ssid is the same but as it is a fysical other AP it wouldn't have internet access. So it would require a manual intervention.

    On my smartphone I have an app that automaticly log's me in to the homespot when one is available. It enters my login and pass and I don't get the splashscreen.

  3. Ok here's my problem:

    There are a lot of wifi hotspots around that aren't pasword protected. So you can just connect to them and there's no need for a pasword. But to use them you need to log in on a website. This means that if I want to set up a "free wifi" and give my clients internet access I need to be able to let the pineapple log into the hotspot.

    Is that possible?

    I know clients could get on the internet if they would enter the log in with the splash screen themself and trafic would go through the pineapple but that's not what I want. I want people not to see the splash screen.

    Thx

  4. Got a few more questions:

    - how do you see if a person manualy connected to the pineapple or that karma answerd the probe request?

    - I only see my own laptop in the intelligence report but on the second screen in karma I see 10 clients.

    - Where can I find Karma log's? Does it log traffic or do I use another infusion for that?

    - I see on the third page of karma: auth attempt 1/3 2/3 3/3 ... does this mean it's trying to authorise the probe request but it doesn't succeed?

    Thx

  5. There are also others clever way to get devices to connect to your Pineapple - There's not just KARMA!

    A newbie isn't much with a cryptic sentence. If you want to help hem explain what you mean.

  6. Ok a few more questions.

    1 I used karma in a busy place. I named the ssid free wifi. How do I see when a person connects to the karma by choice of if karma has connected someone by accepting the proberequest? I see proberequest but in the log I see " auth attempt 1/3 2/3 3/3"

    2. In the intelligence report I only see my own laptop connected to the pineapple. In the second screen I see a lot more clients.

    3. As I was unable to connect to the pineapple bar I couldn't install sslstrip. Can I see a log what site's where visited, login's, paswords?

    Thx

  7. "Also, where are you running karma? And I mean that physically, are you at home or are you doing this testing in a target rich environment like a coffee shop or airport? You may get plenty of probes at home but none of the devices connect for several different reasons."

    even if I connect to my "free wifi" AP (pineapple) I can't see any logs, sslstrip is running but can't capture anything.

    It's realy frustrating to buy something, realy read a lot, watch a lot, try a lot and get no result.

  8. I didn't mean to insult anyone but I read all the posts, I watched all the video's but still it's not working. Most of the posts, video's are for the mark 4 and although you say it also works for the 5 for a newbie it doesn't. Things that are logical for you are a puzzel for newbies. So a different screen, just one "logical" setting makes a huge differance.

    I did everything like in the video's but in the video's it's basic and everyting works fine. But what if it doesn't?

    What If I connect my android phones but I can't select usb tethering because it says there's no usb connected?

    What if I see some probe requests but no connections. What to do then? What could be the problem? If I connect manualy karma sees the connection but where do you see the logs?

    I'm missing a basic tutorial on how to use the pineapple. And the infusions. How to use them together. I'm want to make that from a newbie point off view but I need to get it to work first.

  9. thx for the fast reply.

    6. Karma was running. I made a new list with the editor. I saved the list and I started the occupineapple infusion. The karma SSID dissapeared and the other ssid's came visable. Turned it off but they where still visable. Tried to set the ssid in karma but didn't work. Had to reset the pineapple to get rid off them.

  10. I knew I'm new and I'm willing to learn how to use the pineapple but there isn't much support here. I tried the IRC channel. No response. I tried the video's... Mark IV...

    If you would make some basic tutorials for the mark V there would be a lot less questions.

    For example:

    1. I'm connected to my home wlan through cliënt mode. It looks like it uses Wlan1 on the pineapple. I thought wlan1 was for jamming and wlan0 was for connecting.

    2. I want to setup an AP. I can enter a SSID in karma and it shows but how do I give them internet from the client connection?

    3. SStrip. just install and let it run?

    4. The jammer. How do I jamm everyone connected to AP x but still connect myself to AP x

    5. Android usb tethering. How is it done? When I plug in the usb my phone(s) don't see it as a usb connection so they don't allow usb tethering. But the phones charge throug the same usb connection.

    6. Occupineapple. I enterd 1 name to broadcast and got +/-20 SSID's with only numbers and letters but not the one I enterd.

    Please help me, it's frustrating to try and not get any help.

    Thanks

  11. Hmm this thread is not going the way I intended. The idea was to just send out a burst so that the connection was briefly interupted and the device would change the connection to wifi. It was never the idea to make a cell phone jammer that would keep jamming.

    Maybe just lock the thread.

    Thx

  12. Occupineapple does broadcast fake SSID's but not random, I believe you can enter the SSID's you want to broadcast and as they are fake they all just have to be redirected trough the same internet connection that is supplied by the pineapple.

    That would mean that a you could predefine SSID's that are common in your area. For example a free wifi AP from a provider. Here we have 2 main internet providers. They both let you connect to any wifi router from any cliënt. It makes a nation wide free wifi network. If you connect to the providers free wifi you don't have to enter a pasword. When start using the internet you are redirected to a login page. Most people have there login and pasword automaticly filled in. So they won't notice that they don't have to enter their pasword (that if you are supplying internet from a different AP). And even if you don't have acces to the wifi yourself you they would get the login screen and could just connect trough the pineapple without noticeing it.

    Never tried it but I think it should work.

  13. Hello,

    sorry if this is completly unrealistic.

    As most people use 3G 4G there's little need to connect to a wifi so you can't intercept the signal. Would it be possible to jamm the cell phone signal. Not al the time but just a burst so that the connection is lost and the phone starts to search for a wifi signal?

    Just an idea.

    Greetz

    Nabs

  14. Thx for the replies.

    A few more questions:

    1. is it possible to jamm the internet access point for everyone else but still have the pineapple connect to it?

    2. If I would like to set up a evil twin AP or multiple Evil twins and a wifree honeypot Ap should I use occupineapple to acomplisch that?

    For example:

    SSID A (protected but got the pasword)

    SSID B (protected)

    Pineapple config:

    Pineapple connected to the SSID A for internet acces

    pineapple SSID WIFREE

    occupineaple SSID's

    fake SSID A (open)

    fake SSID B (open)

    Jam real SSID A and real SSID B

  15. I guess your school is in Kortrijk. So imagine you know the login to a nearby AP. You could drop the pineapple with a large battery on a roof and pick it up later. That way it could do it's job unnoticed and undiscoverd. That way you don't need physical acces into the building. A waterproof case would be needed but the students in the design class could make that :)

  16. Hello,

    I'm new to the pineapple. I read al lot of posts and the more I read the more I get confused.

    First of all karma only work with the atheros, is this correct? So that would mean the Wlan0.

    There seems to be a lot of confusion on what karma can do. Can it spoof any network (pasword protected and open networks) or just open networks?

    If karma uses the wlan0 can the wlan0 also be used for the client mode? And the wlan0 to be a wireless AP?

    sstrip is just a piece of software so I don't think it needs a defined wireless adapter.

    The jammer uses Wlan1. Does this means it also jammes the pineapple as AP?

    What I'm trying to set up:

    A MitM attack with sstrip and jammer.

    I thought that that would be easy. Karma and the client mode on wlan0, jammer and AP on the wlan1, sstrip just running.

    Thought would be the word as it doesn't work as I tried.

    Karma kinda works. It sees probe requests but it doesn't connect them. The jammer doesn't seem to work. I see the pineapple AP and when I connect to it karma sees me as connected but can't see any log.

    Can anyone tell me how my settings should be?

    thx

  17. Alright let's start with a few questions:

    1) Did your pineapples SSIS appear on your phone when you scanned for networks?

    > at first it didn't now it does.

    2) Does your phone have any open wireless networks saves in it?

    Yes it has but doesn't karma pretend to be any network?

    3) What phone do you have?

    Samsung galaxy s3

    As far as client mode goes,

    1) When you say settings don't save (wlan0), what exactly do you mean? Wlan0 is the device you connect to and the one karma runs on. Wlan1 is used for client mode, deauth attacks, wps cracking, etc.

    I thought that client mode would remember my home network once I logged in. Every time I disconnect the power of the pineapple it forgets my network login.

    Thx

  18. Hello,

    I got the mark V yesterday. I read a lot about it before I got it.

    I did as asked and let it update. After it was booted I upgraded to 1.2.

    I entered "network" and in client mode I entered my home network so that anyone that would connect would be able to use internet. It could connect. First problem: the settings don't seem to store in the device. So when I disconect it from the power it doesn't remember the network settings. (wlan0) Once it was set up I refreshed the ssid list in the client tab and it says "no networks found".

    I started up karma from the home screen. Both Karma and auto start. I entered karma and I saw just a few probe requests. No connections. On the Karma client pages it says that there are no clients. I removed my home network settings from my phone so that the phone would probe and hopefully connect through the pineapple. It doesn't. I let my phone scan for networks but it doesn't do a thing.

    When I look at the networks that are available I see all the usual networks and I see my home network twice. Once secure once unsecure. I also see a network labled "other network" altough I didn't change the ssid from the pineapple.

    What I was trying to do: Start karma and sstrip. Let my phone probe for known networks and connect trough the pineapple thinking it was a trusted network. Let the pineapple log trafic. Use my home network as internet access.

    Thanks for the help,

    Nabs

×
×
  • Create New...