Jump to content

rcanpolat

Active Members
  • Posts

    11
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by rcanpolat

  1. That worked out quite well. I used Ubuntu for Windows to get a Linux terminal and compiled the code. For reference I've had to edit it slightly as the app im cracking closes after every failed attempt so im running the below snippet instead to loop the reopening of the app after every attempt. I have noticed that background interrupts on Windows cause this to go out of sequence (and my actual Ducky as well) and instead the key strokes start triggering other apps to launch to the point of a system hangs and needs a force shutdown. This happens quite a lot on Windows and i suppose its only noticeable on such a long looping task like this. Given that it needs to be run for such a long period of time im probably going to run it in Windows safe mode without networking to give it the least chance of being interrupted. I've estimated this will crack the code in just over 2.5 days. Thank you to both kdodge & Cribbit👍 for(count = 000000; count < 100000; count++){ memset(launch, 0, sizeof(launch)); sprintf(launch, "%06d", count); Sleep(110); string(launch); Sleep(0); enter(); Sleep(0); enter(); Sleep(0); unsigned char launch[64]; uint32_t count = 0; gui_r(); Sleep(100); string("C:\\a\\s\\a.exe"); enter(); } return 0;
  2. That worked very well for generating the code, although as you said it does take some time to execute and build. Its over 80mb. I've had to throttle the delay at 35, otherwise im getting mistypes waiting for the GUI to catch up. I've also shortened the path to the exe file to trim down the timing. At this rate it will take up to 4 days to crack the code which isn't too bad. I would appreciate advice from anyone regarding speeding up this process. My ducky has never been flashed so i don't know if that changes anything. Its running the original firmware from around 2011 or around that period.
  3. Unfortunately for me i haven't got a clue how to write or compile c. I wouldn't know where to start.
  4. Hey guys and gals. I need to crack a password for a very very old piece of software (its over 20 years old at this stage and the dev is no longer supporting it). Pretty sure it was developed in Windows 98. The software gets activated with a 6 digit number. The apps way around brute force is to shut down the app after every failed attempt. This is the code i need to loop... 1 million times (with the second string increasing by 1 digit every time) 😂. GUI r DELAY 100 STRING C:\app\software\app.exe ENTER DELAY 1000 STRING 000001 ENTER ENTER What's would be the fastest way for me to write in the increasing 6 digit number (6th line of the code) into a script? Currently i have an excel file open with column A populated with increasing numbers (cell A1=000000, A2=000001 etc). I can write the script to copy from the excel list after every attempt but would there be a more efficient way to code the numbers directly into the ducky script to increase the speed of the brute force. Short of that could you advise of some brute force software on windows that can follow the above script's flow since the app shuts down after every failed attempt and needs to be re-launched again.
  5. Look.I get the whole tin foil hat side of things but additionaly I'm putting my own network at risk, someone can swipe my bank details and withdraw my funds or whatever! Lol OK end of topic - its a shit idea - thanks anyway
  6. Well obviously there would be a level of trust with the person. At the first sign of an SSL strip the VPN would be shut down. How much do you trust your VPN provider... Its the same situation. Who is to say someome in GoDaddy isn't sitting there watching the traffic go by? Netflix is available in Ireland however not all content is available and its the same in the US, not all content is available there. Finally my VPN is separated from my LAN. My NAS etc is all secured
  7. im not talking about buying a vpn service. i run my own vpn off my router so this would be a free exchange for the same state side or uk
  8. Anyone interested in exchanging VPN logins? I have a 120 Down / 15 Up Unlimited Fiber connection in Republic of Ireland (in the coming months this is to be upgraded to a 240 Down / 20 Up Connection) Ideally looking for a US and UK VPN around the same connection speed. Reason im asking... Free ones suck! Looking to use it with Netflix US and BBC iPlayer
  9. So im running Kali here on my Thinkpad. Connected to my wireless network, decided to crack out my pineapple. Got it working great for 10 minutes until it decided to lock up and forced me to restart the device. After that im not able to get an internet connection on the pineapple and when connected to pineapple over (eth0) my thinkpad doesn't connect to the Internets. I briefly remember something about connection orders when i used to play around with my pineapple on my mac. Is that whats happening here? See video for example: http://www.youtube.com/watch?v=Dp39zvVYCHs
  10. Any update on a UK distribution system? I'm in Ireland and my mkiv was expensive to ship and tax here when I got it last year. I want a mkv and I'm bring pushed away from purchasing due to heavy tax and shipping fees
  11. Trying to tether my nexus to my mkiv. im outside of 3g/4g coverage where my house is in ireland so thats not an option. my phone is connected to a 100mb fiber connection (over wifi) and im plugged into the pineapple over usb (tethering is turned on) however i cant get an external ip to show up on my mkiv. does tethering only work from 3g/4g data to usb or does it also work from wifi to usb? why can't i connect and get an ip? device is powered at 2amps and usb is powered at 1amp (through the hak5 y cable) Dmsg: [ 0.000000] Linux version 3.3.8 (pineapple@nimbus) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #32 Fri Aug 2 02:20:15 BST 2013 [ 0.000000] MyLoader: sysp=413b442a, boardp=316e84a9, parts=a9002a46 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc) [ 0.000000] SoC: Atheros AR9330 rev 1 [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone PFN ranges: [ 0.000000] Normal 0x00000000 -> 0x00002000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00002000 [ 0.000000] On node 0 totalpages: 8192 [ 0.000000] free_area_init_node: node 0, pgdat 802d2410, node_mem_map 81000000 [ 0.000000] Normal zone: 64 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 8128 pages, LIFO batch:0 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 [ 0.000000] Kernel command line: board=HORNET-UB console=ttyATH0,115200 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware) rootfstype=squashfs,jffs2 noinitrd [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 29132k/32768k available (2102k kernel code, 3636k reserved, 404k data, 208k init, 0k highmem) [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:51 [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) [ 0.080000] pid_max: default: 32768 minimum: 301 [ 0.080000] Mount-cache hash table entries: 512 [ 0.090000] NET: Registered protocol family 16 [ 0.090000] gpiochip_add: registered GPIOs 0 to 29 on device: ath79 [ 0.100000] MIPS: machine is ALFA NETWORKS Hornet-UB [ 0.550000] bio: create slab at 0 [ 0.560000] Switching to clocksource MIPS [ 0.560000] NET: Registered protocol family 2 [ 0.570000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.570000] TCP established hash table entries: 1024 (order: 1, 8192 bytes) [ 0.570000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.580000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.590000] TCP reno registered [ 0.590000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.600000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.600000] NET: Registered protocol family 1 [ 0.610000] PCI: CLS 0 bytes, default 32 [ 0.630000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.630000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.640000] msgmni has been set to 56 [ 0.640000] io scheduler noop registered [ 0.650000] io scheduler deadline registered (default) [ 0.650000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.660000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART [ 0.660000] console [ttyATH0] enabled, bootconsole disabled [ 0.680000] m25p80 spi0.0: found mx25l6405d, expected m25p80 [ 0.680000] m25p80 spi0.0: mx25l6405d (8192 Kbytes) [ 0.690000] 7 cmdlinepart partitions found on MTD device spi0.0 [ 0.690000] Creating 7 MTD partitions on "spi0.0": [ 0.700000] 0x000000000000-0x000000040000 : "u-boot" [ 0.710000] 0x000000040000-0x000000050000 : "u-boot-env" [ 0.710000] 0x000000050000-0x000000650000 : "rootfs" [ 0.720000] mtd: partition "rootfs" set to be root filesystem [ 0.720000] mtd: partition "rootfs_data" created automatically, ofs=590000, len=C0000 [ 0.730000] 0x000000590000-0x000000650000 : "rootfs_data" [ 0.740000] 0x000000650000-0x0000007e0000 : "kernel" [ 0.740000] 0x0000007e0000-0x0000007f0000 : "nvram" [ 0.750000] 0x0000007f0000-0x000000800000 : "art" [ 0.750000] 0x000000050000-0x0000007e0000 : "firmware" [ 0.780000] ag71xx_mdio: probed [ 0.780000] eth0: Atheros AG71xx at 0xba000000, irq 5 [ 1.330000] eth0: Found an AR7240/AR9330 built-in switch [ 2.370000] eth1: Atheros AG71xx at 0xb9000000, irq 4 [ 2.920000] ag71xx ag71xx.0: eth1: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY] [ 2.930000] TCP cubic registered [ 2.930000] NET: Registered protocol family 17 [ 2.940000] Bridge firewalling registered [ 2.940000] 8021q: 802.1Q VLAN Support v1.8 [ 2.950000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. [ 2.960000] Freeing unused kernel memory: 208k freed [ 6.520000] Registered led device: alfa:blue:lan [ 6.520000] Registered led device: alfa:blue:usb [ 6.520000] Registered led device: alfa:blue:wan [ 6.520000] Registered led device: alfa:blue:wlan [ 6.520000] Registered led device: alfa:blue:wps [ 9.820000] JFFS2 notice: (451) jffs2_build_xattr_subsystem: complete building xattr subsystem, 3 of xdatum (0 unchecked, 2 orphan) and 25 of xref (0 dead, 11 orphan) found. [ 10.860000] SCSI subsystem initialized [ 11.170000] usbcore: registered new interface driver usbfs [ 11.170000] usbcore: registered new interface driver hub [ 11.180000] usbcore: registered new device driver usb [ 11.780000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 11.780000] ehci-platform ehci-platform: Generic Platform EHCI Controller [ 11.790000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1 [ 11.830000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000 [ 11.850000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00 [ 11.850000] hub 1-0:1.0: USB hub found [ 11.850000] hub 1-0:1.0: 1 port detected [ 11.980000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 12.100000] uhci_hcd: USB Universal Host Controller Interface driver [ 12.220000] Initializing USB Mass Storage driver... [ 12.220000] usbcore: registered new interface driver usb-storage [ 12.230000] USB Mass Storage support registered. [ 12.330000] usb 1-1: new full-speed USB device number 2 using ehci-platform [ 12.490000] hub 1-1:1.0: USB hub found [ 12.490000] hub 1-1:1.0: 4 ports detected [ 33.240000] usb 1-1: USB disconnect, device number 2 [ 33.660000] Compat-drivers backport release: compat-drivers-2013-01-21-1 [ 33.660000] Backport based on wireless-testing.git master-2013-02-22 [ 33.670000] compat.git: wireless-testing.git [ 33.780000] cfg80211: Calling CRDA to update world regulatory domain [ 33.780000] cfg80211: World regulatory domain updated: [ 33.790000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 33.790000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 33.800000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 33.810000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 33.820000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 33.820000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 35.290000] usbcore: registered new interface driver rt73usb [ 35.430000] usbcore: registered new interface driver rtl8187 [ 35.470000] ath: EEPROM regdomain: 0x833a [ 35.470000] ath: EEPROM indicates we should expect a country code [ 35.470000] ath: doing EEPROM country->regdmn map search [ 35.470000] ath: country maps to regdmn code: 0x37 [ 35.470000] ath: Country alpha2 being used: GB [ 35.470000] ath: Regpair used: 0x37 [ 35.480000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 35.480000] Registered led device: ath9k-phy0 [ 35.490000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2 [ 35.510000] usbcore: registered new interface driver rt2800usb [ 35.590000] cfg80211: Calling CRDA for country: GB [ 35.600000] cfg80211: Regulatory domain changed to country: GB [ 35.600000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 35.610000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 35.620000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 35.620000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 35.630000] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 35.640000] Button Hotplug driver version 0.4.1 [ 35.900000] RPC: Registered named UNIX socket transport module. [ 35.900000] RPC: Registered udp transport module. [ 35.900000] RPC: Registered tcp transport module. [ 35.910000] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 36.270000] PPP generic driver version 2.4.2 [ 36.410000] tun: Universal TUN/TAP device driver, 1.6 [ 36.410000] tun: (C) 1999-2004 Max Krasnyansky [ 36.670000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 36.900000] NET: Registered protocol family 24 [ 37.030000] nf_conntrack version 0.5.0 (458 buckets, 1832 max) [ 37.730000] xt_time: kernel timezone is -0000 [ 38.230000] usbcore: registered new interface driver ath9k_htc [ 38.460000] usbcore: registered new interface driver usbserial [ 38.460000] USB Serial support registered for generic [ 38.470000] usbcore: registered new interface driver usbserial_generic [ 38.470000] usbserial: USB Serial Driver core [ 38.520000] usbcore: registered new interface driver cdc_ether [ 38.630000] Error: Driver 'gpio-keys-polled' is already registered, aborting... [ 38.750000] usbcore: registered new interface driver rndis_host [ 43.210000] usbcore: deregistering interface driver usbserial_generic [ 43.220000] USB Serial deregistering driver generic [ 43.220000] usbcore: deregistering interface driver usbserial [ 43.270000] usbcore: registered new interface driver usbserial [ 43.270000] USB Serial support registered for generic [ 43.280000] usbcore: registered new interface driver usbserial_generic [ 43.280000] usbserial: USB Serial Driver core [ 46.110000] device eth0 entered promiscuous mode [ 52.430000] device wlan0 entered promiscuous mode [ 52.480000] br-lan: port 2(wlan0) entered forwarding state [ 52.490000] br-lan: port 2(wlan0) entered forwarding state [ 54.490000] br-lan: port 2(wlan0) entered forwarding state [ 89.810000] usb 1-1: new full-speed USB device number 3 using ehci-platform [ 89.970000] hub 1-1:1.0: USB hub found [ 89.970000] hub 1-1:1.0: 4 ports detected [ 90.170000] usbcore: deregistering interface driver usbserial_generic [ 90.180000] USB Serial deregistering driver generic [ 90.180000] usbcore: deregistering interface driver usbserial [ 90.210000] usbcore: registered new interface driver usbserial [ 90.220000] USB Serial support registered for generic [ 90.220000] usbcore: registered new interface driver usbserial_generic [ 90.230000] usbserial: USB Serial Driver core [ 109.100000] usb 1-1.3: new full-speed USB device number 4 using ehci-platform [ 109.210000] usb 1-1.3: not running at top speed; connect to a high speed hub [ 109.420000] usbcore: deregistering interface driver usbserial_generic [ 109.430000] USB Serial deregistering driver generic [ 109.430000] usbcore: deregistering interface driver usbserial [ 109.460000] usbcore: registered new interface driver usbserial [ 109.470000] USB Serial support registered for generic [ 109.470000] usbserial_generic 1-1.3:1.0: generic converter detected [ 109.480000] usb 1-1.3: generic converter now attached to ttyUSB0 [ 109.480000] usbcore: registered new interface driver usbserial_generic [ 109.490000] usbserial: USB Serial Driver core [ 127.550000] usb 1-1.3: USB disconnect, device number 4 [ 127.550000] generic ttyUSB0: generic converter now disconnected from ttyUSB0 [ 127.560000] usbserial_generic 1-1.3:1.0: device disconnected [ 127.900000] usb 1-1.3: new full-speed USB device number 5 using ehci-platform [ 128.010000] usb 1-1.3: not running at top speed; connect to a high speed hub [ 128.030000] rndis_host 1-1.3:1.0: usb0: register 'rndis_host' at usb-ehci-platform-1.3, RNDIS device, 4a:df:7f:11:eb:03 [ 128.300000] usbcore: deregistering interface driver usbserial_generic [ 128.310000] USB Serial deregistering driver generic [ 128.310000] usbcore: deregistering interface driver usbserial [ 128.360000] usbcore: registered new interface driver usbserial [ 128.360000] USB Serial support registered for generic [ 128.370000] usbcore: registered new interface driver usbserial_generic [ 128.370000] usbserial: USB Serial Driver core [ 128.740000] usbcore: deregistering interface driver usbserial_generic [ 128.750000] USB Serial deregistering driver generic [ 128.750000] usbcore: deregistering interface driver usbserial [ 128.790000] usbcore: registered new interface driver usbserial [ 128.790000] USB Serial support registered for generic [ 128.800000] usbcore: registered new interface driver usbserial_generic [ 128.800000] usbserial: USB Serial Driver core [ 188.050000] ------------[ cut here ]------------ [ 188.050000] WARNING: at net/sched/sch_generic.c:256 0x801f98e0() [ 188.050000] NETDEV WATCHDOG: usb0 (rndis_host): transmit queue 0 timed out [ 188.060000] Modules linked in: usbserial sg rndis_host cdc_ether usbnet ath9k_htc(O) ath79_wdt ledtrig_usbdev ledtrig_netdev nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp xt_HL xt_hl xt_ecn ipt_ECN xt_CLASSIFY xt_time xt_tcpmss xt_statistic xt_mark xt_length xt_DSCP xt_dscp ipt_REDIRECT ipt_NETMAP ipt_MASQUERADE iptable_nat nf_nat pppoe xt_conntrack xt_CT xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables nfs tun ppp_async ppp_generic slhc lockd sunrpc button_hotplug(O) rt2800usb(O) ath9k(O) rtl8187(O) rtl8180(O) rt73usb(O) rt2800lib(O) ath9k_common(O) ath9k_hw(O) rt2x00usb(O) ath(O) rt2x00lib(O) nls_utf8 mac80211(O) crc_itu_t crc_ccitt input_polldev eeprom_93cx6 cfg80211(O) compat(O) input_core arc4 aes_generic crypto_blkcipher cryptomgr aead usb_storage uhci_hcd ohci_hcd ehci_hcd sd_mod ext4 jbd2 mbcache usbcore usb_common scsi_mod nls_base crc16 crypto_hash crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O) [last unloaded: usbserial] [ 188.160000] Call Trace:[<80268bdc>] 0x80268bdc [ 188.170000] [<80268bdc>] 0x80268bdc [ 188.170000] [<80071a0c>] 0x80071a0c [ 188.170000] [<801f98e0>] 0x801f98e0 [ 188.180000] [<80071ac0>] 0x80071ac0 [ 188.180000] [<80ee05a0>] 0x80ee05a0 [ 188.180000] [<801f98e0>] 0x801f98e0 [ 188.190000] [<801f9770>] 0x801f9770 [ 188.190000] [<8007c50c>] 0x8007c50c [ 188.190000] [<80077014>] 0x80077014 [ 188.200000] [<80077220>] 0x80077220 [ 188.200000] [<800a84c0>] 0x800a84c0 [ 188.200000] [<80077454>] 0x80077454 [ 188.210000] [<800630ec>] 0x800630ec [ 188.210000] [<800632c0>] 0x800632c0 [ 188.210000] [<80095210>] 0x80095210 [ 188.220000] [<80064b28>] 0x80064b28 [ 188.220000] [<800632e0>] 0x800632e0 [ 188.220000] [<802d38b0>] 0x802d38b0 [ 188.230000] [<802f8e08>] 0x802f8e08 [ 188.230000] [<802d30dc>] 0x802d30dc [ 188.240000] [ 188.240000] ---[ end trace a17cd2348ea0b0be ]--- [ 1316.230000] usbcore: deregistering interface driver usbserial_generic [ 1316.230000] USB Serial deregistering driver generic [ 1316.240000] usbcore: deregistering interface driver usbserial [ 1316.270000] usbcore: registered new interface driver usbserial [ 1316.270000] USB Serial support registered for generic [ 1316.280000] usbcore: registered new interface driver usbserial_generic [ 1316.290000] usbserial: USB Serial Driver core
×
×
  • Create New...