Tig3rch3n

Jup works on Galaxy S2 and S4 ... Dongle is a NOXON v2 I can hear the Firefighter and Coastguards :) Cheers man ... didn't know that's possible with a mobile phone

The Juice 1800 got 10.8-12.6V 1800mAh I tried with a EasyAcc 12000 which got 5V 12000mAh The Juice can handle a Alfa extra but the EasyAcc don't, the Pineapple is in a bootloop :( So I guess, if you just using the Pineapple a 5V source is fine, unless it have 2Ah output I've got some Lipo's lying around from my older Helicopter, maybe i make a batpack out of them ;) I'll report when its done

I've got some similar problem (Access denied) but the PW is correct generate a ssh keyfile with PUTTYgen and copy/pass the publickey via webinterface under Autossh authorized keys go to PUTTY on the left side under 'Connection' -> SSH-> Auth last option 'Private key file for auth. Drop in your Private key file and log in via "root@ip"

I' using a Huawei HiLink E303s, but all from the 'HiLink' series will do. They come up as eth1 so you don't need do mess around with the config 1. lookup you ip via ifconfig 2. got to the IP of the gateway 3. get a Router'like webinterface 4. Put in all the config 5... 6. profit

Confirmed, i just tried my 64GB microSD from Sandisk. Thats Pretty nice, since I try around Karma+tcpDump+sslStrip on bootup And I'm not carrying my Notebook around any time. So I just switch off the Mark V swap the SD cards and can read the logs on the run :)

5005 MHz ? Thats new for me I thought 5GHz starts with 5180 MHz What king of AP do you use? Maybe that 'll help to get around your problem :)

Hey Ho, The RTL chipset just support 802.11g/b The Atheros chipset just supports 802.11g/n So nop I think the Pineapple won't work with 5 Gh/z out of the box BUT you could plug a additional USB 802.11a aka 5Ghz Dongle in and got acces to your wifi.

Eyup! But he bought it for his Thinkpad W510 as battery expansion ... and he said it adds about 6 hours of runtime so it should be worth it :) And i don't buy it by myself ...just borrowed it for the testing. The biggest benefit is, i can power the Pineapple and the RasPi both with one Powersource

Hey ho, i got my Pineapple a week ago and messed around for some time :) But i got a bit bored since and want to go deeper, but the pineapple won't let me ssh in to it. I got that problem a while ago with one of my Parents PC's and i fixed it by using a key file. If i put a keyfile via the webinterface it works O_o? But if i try to ssh via password it says access denied :/ I tried since via Windows 7, Kali and Android ... same Problem everywere. Any solutions? PS: FW 1.0.4 And tryed already Factory reset, PW reset an so on

I use the 12.000mAh/4 USB Port version with my SGS4 and i'll get about 4-5 full charges out. But i don't think it'll work with the Pineapple, the manual says 'up to 2A' but if i use wlan1 in client mode while i have injection on wlan0 on it gets in a rebootcycle. I first thought something messed up and pluged in a serial to USB monitor. And i got a nice clean bootup until the radios powerup and reboots... so not anough juice inside :/ I'll stick to the 12V power and use the EasyAcc to powerup my RasPi :) btw... in took about 15 1/2 hours runtime for the RasPi Next i'll try the Gowergorilla from my friendly Campercollegue