t31m0

You tried to reset and reinstall the infusion ????

In my view ... the pineapple gives you what you ask the first of its list of known BSID ... and if successful in the connection to the first (your phone stops sending requests) .... Regards

Exactly

Good for wardriving .... jajjajjaaj Good idea .... NOTE: logically should not be difficult .... .... and then compared or investigate (client and AP ..) connection ..... it can be very interesting ......

But if you have low loss cables usb ... to 10 mt .... for 10 or $ 15 .... for example ---- >

Yes true ... new topic :)

You have formatted the sd card ??? (I tried to clear the SD) How ???? Opinion ... format the sd card in the pc ... makes a swap and ext4 partition .... an retested ...

Correction .... jejejej Exchanges: exchanges@hak5.org Thanks Darren ... NOTE: I do not have as much time to wait for the replacement ...ArdeTroya and me are going to a security conference to present your products :P ... I'm going to buy another .. but I send this pineapple darren for your look and do the tests .... ;)

that would be perfect ....jejejejej

True .... it will be better ...

Yes .. now work ....

I used gparted in linux to create the swap and partition sd card ... and I always work ... but some time´s with pineapple and do it from their (experimental) interface with some sdcards do it from the interface of pineapple ... have errors ..... I recommend doing it in the pc to format the sd ... Greetings

Hello ... more or less the same thing happens to me .... https://forums.hak5.org/index.php?/topic/33360-mk5-does-not-work/

Error Unexpected Error (request_id: 0acf34e1-c0d2-4305-8af1-f43d26355073)

I see it the same way .... jejejejej

I Darren .... Yes.... all those tests I have done .... 1. Have you tried a different Ethernet cable? -------> 4 or 5 times and different cables .... 2. Have you tried a different PC? ----------------------> 4 different pcs and different 5-port rj45 3. Does the Amber LED light when attempting to use Ethernet? -----> No ....Under no circumstances (no light Amber) ... 4. From the Network tile, do you see information regarding eth0? -----> before upgrading ... eth0 information connecting me looked but only by wifi ... did not work even before the eth0 (only sometimes) very well thought out the problem and actualize firmaware ... because cable could not ..and anything now I can not recover because not detected under any concept cord rj45 .... 5. Is there anything in the Logs tile to indicate a faulty Ethernet controller? Repeating messages regarding eth0 going up and down? ..---------> . No ... in the logs did not see anything specific on eth0 ... everything seemed fine .... ARDETROYA state .... to me doing tests .... and I connect via ssh (wifi) ifconfig eth0 down / ifconfig eth0 up ... etc ..... Many tests ... 6. Has a reflash of factory firmware 1.2.0 using the unbricking method resolved the issue? ------ > Sure ... prove all ... and after resetting the rj 45 was still not working ... I went back to install the 2.0.3 version ... but I leave to answer ... and now I have only static red light .... and as before the rj45 not respond ... I can not recover .. NOTE: sorry for my english .... With the web inposible recovery mode (the last button on the pineapple factory loaded image of 1.2) and have to access this 192.168.1.1 and I not have eth0 (rj45) ....Not work .... And the system default reset ... does not work any more ... I tried everything ..

Nothing is connected by usb ... the problem is that it does not detect or connect to rj45 (ech0) no way ... after many many tests .... and if you do not clearly detected and not connected with any connection ... you can not flash or recover.... but since a few days ... I realized ... that the (eth0) was failing .... today to install the latest version 2.0.3 ... I thought that would solve the problem but eventually stopped responding completely.... NOTE: I connect by wifi ... manage the update 2.0.2 to 2.0.3 ... wlan1 making getway ...because cable not working .... the original charger *

Exactly ....

hello ... after successfully perform the update ... and test for a while and everything was perfect....but I do not know why does not work I went back to reboot the rj45 (eth0) above ever happened to me ... but rebooting solved it. .. but I can not do anything now (dead) ... https://forums.hak5.org/index.php?/topic/33360-mk5-does-not-work/ and re-flash bricked stayed

Hello! I´m writting you because my mk5 does not work. It does not work rj45 (eth0). At the begining I could access the pineapple trought the wifi (trying to reflash so see if there is a s oftware issue). Now there is only the red light ... and proven all the steps that this URD has: https://wifipineapple.com/?flashing&version = mk5 but now there is no way to connect to the pineapple, does not connect either cable or wifi and it seems completely dead. The pienapple only has 3 moths. greetings NOTE: It is not the first pineapple I buy, and I have 2 operating mk4 and they work as good as the first day I have checked the forum to answers but anything worked.

Perfect xDDDDD .... I going testing NOW .... hahahahhahaa ... Thanks for god work .... :)