Hits_s

If use avast antivirus, disable the firewall module. Same problem and worked for me

Thanks :) Downloading ... But I'm having problems with the upgrade, can not get it to start again pineapple, I having to load the factory image and try to retrieve it again but when you install the new firmware (1.3.0) does not start the pineapple. Has anyone had similar problems? Keep the work :D

solved connect for WAN port

Hi, I have a little doubt, I present the scenario: I have a router with access to internet with ip 192.168.1.100 connected to this router have a pineapple Mark iv via PoE. Pineapple Connection shares the wireless interface and the name of the wireless network is pineapple_XX. Now the question is how should access the pineapple now? I've tried via ssh (172.16.42.1) and have tried with the ip of my access point (192.168.1.100). I connected to my wireless network and IP pineapple_XX gives me the router's DHCP server (192.168.1.110). I have also used nmap to see the devices connected to the network and is only my PC and the legitimate access point. As I can access the router without disconnecting pineapple? Thanks for the directions.

Running randoroll nothing more and having installed more than half of the infusions without executing them. Usually erased by power-cycling

Same problem here, deletion of infusions, corrupted data logs, etc, etc, etc .... I've solved changing the original SD for another 2 Gb SD Ya I thought it was only

Well my pineapple has not gone well off pulling the cable. I have lost count of the times that have been deleted infusions within the sd card into the "infusions" folder off that way. I try to make a halt every time I turn off the pineapple (even then sometimes I also lost some of them, but only what's inside the folder infusions, the rest remains intact until yesterday, I lost (again) everything, including the average area of the web interface. What I have done is to re-flash the firmware "stager.bin" and the whole process from 0. Now I'm trying yet again .... but in short, you are missing a way to turn off the pineapple "correctly"

I paid 50 euros to Spain for shipping charges and one count of tax and fees 30 euros more than I had to pay the carrier in hand on the door of my house. I ordered the pineapple pack (110 $) and a usb ducky and all went for 180 euros, which is transformed into dollars 243,7 $ . but my pineapple is here :D. arrived two weeks ago

I would be concerned as to dissipate heat pineapple. In close quarters up enough grades... It shows in his pocket, but for the winter is fine :D

gives me a little shame not search the forum this way. Thanks for the help regards

Yes you understand well: D Thanks for answering. Anyway I'm sorry I missed that part in forums that say that you can not make access point, so I conclude that I could perhaps use an external antenna to create another access point. (TP-link or Alfa Network). I do not understand very well because I can not use RTL for a new access point, if I reported some of the forum threads you comment learn to appreciate it. Thank you very much for answering my call for help.

Add image to clarify something else that happens. To see that it can be, I really am out of ideas. thanks

Hello, I wanted to comment a little problem with wlan1 (RTL8187) as much as the active interface change never get another access point. I have found that works because if I look that interface with any access point if you find it, but if in AP mode never shows me the name of the access point as does wlan0 (AR9331). Not to be happening, but the handling is easy and the Wifi-Manager infusion more. Still I edited my /etc/wireless settings and this seems to work only for wlan1 again config wifi-device 'radio0' option type 'mac80211' option channel '11' option hwmode '11ng' option macaddr '00:00:00:00:15:c6' option htmode 'HT20' list ht_capab 'SHORT-GI-20' list ht_capab 'SHORT-GI-40' list ht_capab 'RX-STBC1' list ht_capab 'DSSS_CCK-40' option disabled '0' config wifi-iface option device 'radio0' option network 'lan' option mode 'ap' option ssid 'WIFI_AP1' option hidden '0' option key '41CH3ldfKAS79' option encryption 'mixed-psk+tkip+aes' config wifi-device 'radio1' option type 'mac80211' option channel '11' option hwmode '11g' option macaddr '00:00:00:00:d9:cb' option disabled '0' config wifi-iface option device 'radio1' option network 'lan' option mode 'ap' option ssid 'Pineapple5_D9CB' option hidden '0' option key 'Z0002FCDBFF6D' option encryption 'wep' Even copying of settings radio1 still work. Can you help? Thank you.

hi, you have any swap partition on micro sd included in pineapple Mark V?