Jump to content

mikeyrave

Active Members
  • Posts

    34
  • Joined

  • Last visited

Profile Information

  • Gender
    Not Telling

Recent Profile Visitors

751 profile views

mikeyrave's Achievements

Newbie

Newbie (1/14)

  1. i've had a few issues myself and each one solved; not only in a professional manner but timely.
  2. yeah i kind of figured that after a couple of days of no reply that it was due to CES; hope the team is having a blast. i'm sure everything will work out i can be patient. i still have to wait till the end of February for all the other parts of my project to be available for purchase
  3. That would be pretty sweet if it were true but it also won't give signs of life while using my juice either. i have no other way of powering the device (usb, poe) i only have the wall plug and the juice and i think you fail to realize that i'm not exaggerating when i say "extremely hot" not warm, as in if i had a way of keeping it plugged in i would have used it today for working outside in the 10 degree temperatures as a hand warmer definitely didn't make that mistake like i said i had it for less then 2 hours (straight out of the box) the shop still hasn't responded should i just ship it back for an exchange or wait?
  4. I tried that but still nothing i even left power on to the MKV thinking maybe the led's are out but i get no signal from the wifi or by connecting to it directly to eth.. however my pineapple got extremely hot i have since put it all back in its box and waiting for a reply from the shop because i'm not sure if they will let me do another exchange :( no tester sorry but i'm sure there is something extremely wrong with power getting to the pineapple ^ "..pineapple got extremely hot"
  5. so my first MKV lasted about 5 days (if that) sent that one in for an exchange and received my new one today... It lasted little under two hours After setting it up and making a password i left it running in the corner of my room, while my computer was running reaver to get access to my router for wifi, for updates and installing infusions. after an hour or so i look over and all the lights on the MKV are dead . so i go over and unplug it for a couple of minutes and plug it back in... nothing, completly dead... i've already sent another emial to hak5 but i figured i'd see if anyone has experienced this before or if its just fubar and i have the worst luck at picking pineapples
  6. I'm in the brianstorm/draft stage of a project i'm working on and i'd like to have this include two 12800 pineapple juices (maybe three). for this to have a clean install i'd like to have both the connectors used to connect to the wall charger actually hooked together into an adapter that then can be plugged in to charge both at the same time. This in turn leaves both batteries open to charge/run two separate devices, in my case the MKV and Pi. My main question is "is this possible" secondly any drawbacks such as will this cause the batteries to lose voltage out to the devices due to trying to charge each other at the same time or a significant loss in usable charge because of that, thirdly anything else you'd like to say positive, negative or critically about this before i try and manage it?
  7. well now i'm in a win/lose situation after spending so much money i couldn't just sit here doing nothing... i took the sign that even though i wasn't able to connect to 172.16.42.1:1471 but rather just 172.16.42.1 and also still able to enter the 192.168.1.1 recovery modes as good things i went ahead and spent the past 6 hours trouble shooting and found that i was able to still connect to the MKV through putty which i quickly gave up figuring that since i didn't input a password that i'd have no way of accessing root. Later in the evening i thought i'd give it a shot and i was actually able to gain root by using username: root password: pineapplesareyummy Perfect so i went ahead and downloaded winscp and scp'ed the upgrade.bin file to the /tmp/ folder then ran sysupgrade AND ITS ALIVE but unfortunately its an overly ripe pineapple on the verge of mold its even slower then what it was when i originally started running it. Takes more then 10 minutes just to load all the small tiles if they show up at all, some tiles show no information, and a couple of the tiles will not load the large tiles or take just as long to load their corresponding information. so i guess this is good and bad right now i'm going to try and load the stager and do another recovery hopefully that works out the bugs i'm experiencing *edit* nope just goes back to blinking that amber light forever and its not worth going through the hassle of 'fixing' it the way that i did just so i have a half baked even less functioning device.. guess i'll just wait for a reply from the shop
  8. i sent them a message but didn't included my order number should i wait for a response or send a seconded message
  9. very funny but not my fualt that i got a mkv that hasn't worked even when running with bone stock configuration *edit* anyways going back at it this morning new stager new upgradefiles like usual. 1. 11110 2. format sd card FAT 3. go to 192.168.1.1 flash stager 4. place upgrade.bin/hash to the sd card 5. after complete flash place dips to 11111 6. insert sd card 7. power cycle so you understand the lights it goes in thes order exactly green/dim blue <--same time green stays lit and blue goes bright at the exact time red goes on all in about a second in this order amber comes on blue turns off then amber turns off three seconds after that red goes off and i'm left with a solid green light for about 30 seconds then the amber lights starts to blink and this does not end check my networks i'm able to connect to the ar9331 even though the blue light is not on or comes on when i connnect to it navigate to 172.16.42.1:1471-->nothing navigate to 172.16.42.42:1471-->nothing navigate to 172.16.42.42-->nothing navigate to 172.16.42.1-->get an index of / directory page telling me 0.00 kbytes and a broken /.,. link
  10. yep not working. anyone tell me how i can go about either getting my money back or getting a replacment
  11. well as of now i'm pretty sure my MKV is just a paperweight. after loading a newly downloaded stager and latest upgrade.bin/hash (to a freshly formatted FAT sd card) three times it has just sat there blinking the amber light for well over an hour each time i'm giving it one more go with once again a fresh stager and fresh upgrade files on a formatted card and calling it a night and see how it looks in the morning
  12. that's how the guide says to do and that's how i did but in my attempts to get a configuration to allow the pinapple be my dumb access point i have left it connected to my modem and have successful been able to (after restore) to just connect to it over wifi. i just make sure that before i put in the password to walk over to it and go from 10011 back 11111 for the dip switches. After i accept my password and conditions i merely reconnect to it via wifi again (don't have it setup to auto connect) then go over to 172.16.42.1:1471
  13. are you trying to connect to it via direct ethernet cable or over a wireless connection
  14. well weird finally got it to work as an access point but i had to use completely different settings by setting my ip address to the address my cable modem always gives, setting the gateway to the address of the cable modem, and not sure if it did anythign to help but the dns to 75.75.75.75 that my modem uses... however as i complained about earlier (still haven't found an answer) after i run /etc/init.d/network reload putty freezes up can't access the webui and i have to power cycle after that it worked as a dumb ap but i no longer have access to the webui or putty using any ip *edit* nope it only worked for a short amount of time then i lost connection try and disconnect then reconnect to the pineapple throws an error from windows about not being able to connect... connected my computer directly to the modem like usual to regain internet... did a simply power cycle to the pineapple try and connect to the wifi and once again throws error so stuck doing a factory reset i honestly think i have a lemonapple because i don't see how only configuring the eth0 is supposed to mess anything up from me connecting to the pineapple over the air especially when i do a power cycle disconnected from my modem
×
×
  • Create New...