yabasoya

I already got a Millennium Copyright Act notice from my cable company. Curious about this as well.

I believe that you need to edit large_tile.php as well

You could get around that. Design a circuit board with no radios, just the OS you use. Have 3-4 pcie half mini slots so people could add on as they like. You don't need the FCC to be involved at all. :)

Pineapple MK6 should have 3 radios. For some reason. it always seems like we always need one more radio than we already have.

You could use WinSCP and edit your /etc/config/wireless file. Add the encryption lines. Example: config 'wifi-iface' option 'device' 'wl0' option 'network' 'lan' option 'mode' 'ap' option 'ssid' 'MyWifiAP' option 'encryption' 'psk2' <----add this option 'key' 'secret passphrase' <----add this Good link http://wiki.openwrt.org/doc/uci/wireless Your wlan0 is far weaker than wlan1 and would have a relatively hard time overpowering your 'good twin'. You would have to be in better proximity to your victim client. You would then deauth the 'good twin' using wlan1. You would need to provide internet to your victim through a usb wifi (alfa), Ethernet, or a usb 3g modem. Newer devices have a way of not falling into this trap. I name my wlan0 ssid 'attwifi' and I get a whole lot of connections. I'm not sure if it is with the way karma works but I'll get a connection through my wlan0 ssid 'attwifi' but not the karma version of 'attwifi' a lot of the time. You can probably recreate this by naming a router to attwifi, connect to it so it stores in your device. Shut off the router. Turn on the pineapple with karma. You may not automatically connect to it. Name your wlan0 to attwifi. You will probably autoconnect to that. At least that's my experience. 1st answer

Download WinSCP. Connect to your pineapple. Navigate to the /etc/config/wireless and double click. It will open for you to edit. Mine has a section that looks like this. config wifi-iface option device 'radio0' option network 'lan' option mode 'ap' option ssid 'attwifi' <-----------Change this option hidden '0' This link is handy. http://wiki.openwrt.org/doc/uci/wireless Greetings to you!!

Emailed them on the 22nd, still no reply. I just assumed they were off for the holidays and I was taking it easy on them for not replying. I didn't realize that I needed to check the blog for the customer service hours. My bad.

Youre a busy man.. Thanks~!

My first experiment with those batteries was when I busted open some battery packs and it contained those blue batteries. I soldered them in series and I got 3.5 X 3 = 10.5 (If I remember correctly) Anyways, I thought I could charge it with a 12 volt charger. I was wrong, I killed the batteries. 12 volt chargers charge at 13.5. So if you were thinking on going that route instead of the laptop charger, just be careful.

I think he means installing all of the infusions. The more that I install, the slower the page takes to load. Like 14.4k slow.

A simple autoreply stating that they were not available for 3 weeks would have gone a long way. I'm in the same boat, waiting for a reply.

He meant the firmware version, lol you got me to check for it.

I can't get my wlan0 to put out more than 18db, while I can get wlan1 to put out 30db. I was told this is done for "legal reasons"

I can't wait, it seems that were are getting a lot of good things shortly.

Reaver is good as one of your tools in your bag, not the primary tool you would go to. Certainly not worth $200 in my book. If there were 20 routers nearby, maybe 8 would have wps enabled, and maybe I could crack 2 of those with Reaver without setting off any security. Those 2 would probably be the oldest in the list. I could usually only get 3/10 wps enabled routers anyway.

Maybe wipe the sd card while in flight? :o

I find that my pineapple runs fine at 5v running simple constant tasks. As soon as you connect anything usb, it starts to become flakey at 5v. Maybe because 5v is the minimum power spec and if things kick on requiring extra power (deauthing every 10 seconds or something) you can momentarily dip below 5v. Kind of like when your A/C comes on in the car or your house and you notice the lights dim for a second. To be more precise I found my pineapple locking up or rebooting when the voltage dipped to 4.85v, even just for a moment.

Thanks for the link!

look up Linux command 'screen'

Upgraded to 1.5 tonight, started up Wifi Jammer, connected to my home network, started a ping 8.8.8.8 -t. 10 seconds later started to request time out. A few seconds later I was kicked off. I love it, thanks.

interesting

I want to see this in the Hakshop under "Special Forces" kit. http://www.amazon.com/TR-Solar-Backpack-Charging-20000MAH/dp/B00BW3Z9IM/ref=sr_1_31?ie=UTF8&qid=1388880512&sr=8-31&keywords=20000mah

Batteries: http://batteryuniversity.com/learn/article/discharging_at_high_and_low_temperatures Cold temperature increases the internal resistance and diminishes the capacity. Batteries that would provide 100 percent capacity at 27°C (80°F) will typically deliver only 50 percent at –18°C (0°F). The performance of all battery chemistries drops drastically at low temperatures. At –20°C (–4°F) most nickel-, lead- and lithium-based batteries stop functioning. Although NiCd can go down to –40°C (-40°F). Electronics: Well there is so much info on this but a Linksys router is designed for 32-104° F. On a side note, it hit 5°F the last couple of days and my gps fired right up in my car, although the display was a little slow to refresh. Just keep your radios at 1 watt and it should keep itself warm ;)

Hi!! Depending if the radios are at full power you will get less time. I find, generally, by the second or third full charge the run time increases. Is that on battery power or AC power? Did you download the wireless tool infusion? I forget the name of it and my pineapple is off right now. Do you know how to ssh or scp into the pineapple? You can check the /etc/config/wireless file when it doesn't work. If you post the contents of the file, we may be able to see what went wrong.

:o Oh my!