Jump to content


Active Members
  • Posts

  • Joined

  • Last visited

  • Days Won


Everything posted by yabasoya

  1. Thanks for the heads up.. I'll need to check into this again.
  2. You're not the only one. In fact, I cant find anyone that has gotten this to work. I keep checking back here weekly in hopes that someone made a breakthrough.
  3. I guess that is a no?
  4. I am also curious to know if anyone has gotten this to work fully.
  5. Can someone take a look at these routing tables to see if anything looks funny? 104.XXX.XXX.25 = CloudServer = VPN address of LAN Turtle = VPN address of my laptop = Router that the Lan Turtle is connected to = LAN address of OpenVPN Server CloudServer turtle@Cloud Server:~$ route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 104.XXX.XXX.1 UG 0 0 0 eth0 UG 0 0 0 tun0 * UH 0 0 0 tun0 104.XXX.XXX.0 * U 0 0 0 eth0 * U 0 0 0 as0t0 * U 0 0 0 as0t0 * UH 0 0 0 as0t0 turtle@ClodServer:~$ ping PING ( 56(84) bytes of data. From icmp_seq=1 Destination Port Unreachable From icmp_seq=2 Destination Port Unreachable LAN Turtle root@turtle:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default UG 0 0 0 tun0 default UG 0 0 0 eth1 104.XXX.XXX.25 UGH 0 0 0 eth1 UG 0 0 0 tun0 * U 0 0 0 br-lan * U 0 0 0 eth1 * U 0 0 0 tun0 root@turtle:~# ping PING ( 56 data bytes 64 bytes from seq=0 ttl=64 time=1.562 ms 64 bytes from seq=1 ttl=64 time=0.623 ms My Laptop IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 20 20 On-link 276 On-link 276 On-link 276 104.XXX.XXX.25 20 On-link 306 On-link 306 On-link 306 20 On-link 276 On-link 276 On-link 276 On-link 306 On-link 276 On-link 276 On-link 306 On-link 276 On-link 276 Traceroute from my laptop to turtle LAN Tracing route to over a maximum of 30 hops 1 22 ms * 23 ms 2 43 ms 45 ms 46 ms 3 reports: Destination protocol unreachable. Trace complete.
  6. My cable modem puts out 2 public ip addresses. Basically I have a switch and 2 routers along with a vps.
  7. Still stuck.. I cant get past this. I found a couple of solutions online that say to reconfigure routes. I didn't want to start messing with that because I feel the turtle should phone home after being dropped and give me a vpn connection from whatever subnet it falls on. It must be something silly that I'm missing.
  8. I am stuck exactly in the same spot. I have my lan turtle sitting behind a Linksys router. I am on a 10.x.x.x subnet, Openvpn server is on a 172.27.224.x subnet, and my lan turtle is on a 192.168.1.x subnet. Both my laptop and lan turtle have successful connections to the open vpn server. Tracing route to over a maximum of 30 hops 1 25 ms * 21 ms 2 48 ms 43 ms 43 ms 3 reports: Destination protocol unreachable. Trace complete. is my lan turtle, so it looks as if it knows to go to the lan turtle to find the 192.168.1.x subnet. It just isn't making that last step. If I SSH into the lan turtle, I can ping successfully.
  9. I suspected that is what this is trying to accomplish. Although I've read several times that you cannot SSH into the Ethernet side without reverse SSH first. Can you SSH directly this way? I'm just trying to connect the dots. Thanks.
  10. I figured it out. When I initially setup the user turtle as a vpn clent, I never selected autologin. I then downlowded the ovpn file. Shortly after I checked the autoligin box and didn't realize the format of the ovpn file changed. I downloaded a fresh copy of the ovpn file and uploaded it. All works now. I suppose that the turtle was connecting to a login prompt rather than auto login. It never made the full connection but reported back that it connected. Just thought I'd share so that it may help someone else.
  11. So this is setup as one or the other, not both at the same time? I still need to work on this more but the admin panel shows 0 connections even though the lan turtle seems to connect.
  12. Sorry for being a pain. I can't seem to find the answer. After starting the openvpn module I seem to lose SSH through the VPS to the Lan Turtle. I get the connection refused error. As soon as I turn off open vpn (SSH through USB), I can SSH again through the VPS to the Lan Turtle. I'm trying to get openvpn working correctly and that may be causing my issue since I cant seem to get openvpn right either :( Also, can someone point me to instructions on converting .ovpn to .conf?
  13. I suppose it was me not connecting the dots.. Sorry about that. I would have bet my life that I could SSH over LAN. Thanks for putting up with my ignorance.
  14. I don't know what to say.. I've heard that twice already. I was able to SSH and SCP into my lanturtle. I have the profiles saved in winscp and putty. I have a LAN profile and a USB profile. The lan turtle is plugged into my switch in the basement so I'm not using the USB profile.
  15. Was my response really that confusing? Let me explain.. With the pineapple I am able to factory reset it when I mess things up. Things are back to normal after I do that. I was asking if the factory reset for the lan turtle worked similarly to the pineapple. Darren posted somewhere that you can unscrew it, hold the button, then reflash it. I don't know if that was just for bricked lan turtles. I just assumed that if I flashed the lan turtle with turtle-2-factory.bin, it would reset it to factory, erasing my mistakes. Like reinstalling Windows when someone messes it up. I had SSH access when I first got it. I had SSH access before I flashed it. I flashed it. Now I don't have SSH access. Also, no SSH access from a laptop that never connected to the lan turtle, so there should not be any key mismatch or known hosts issue. I cannot SSH to my lan turtle directly through my LAN anymore. Mentioning my VPS was just an additional troubleshooting step.
  16. Can I just factory reset this like the pineapple? Remove the screws and hold the button?
  17. That was something that I did earlier. I renamed known_hosts to known_hosts_old as well as the keys file in the /home/turtle/.ssh directory. I still cannot connect directly over my LAN
  18. Perhaps the new one shouldn't have any wifi built in at all. Just 2 slots to fit these: It would make it so easy to customise.
  19. I've had a good time playing around with this until today... I've been getting a lot of dialogue all over the screen lately when going in and out of menus. I didn't know if it was because of my playing around in areas that I wasn't familiar with, so I decided to factory restore using turtle-2-factory.bin. I set up the new password through USB. I downloaded all of the modules. I plugged it back on the lan (DHCP address reservation). I try to putty into it and now I get Connection Refused from the Ethernet side. No problem with SSH on the USB side. As a matter of fact, I can SSH to the Ethernet IP Address when connected through USB. Next part of my troubleshooting. I setup autossh to SSH to my VPS. It appears to connect. If I try to SSH to the turtle using ssh root@localhost -p 2222, I get Connection Refused again. This all worked properly until I reflashed. Perhaps I have some residual keys somewhere?
  20. What is the default DHCP lease time of the pineapple? Is it changeable?
  21. Corrected first post. My issue was that I was on an older firmware, I upgraded to 2.4 and all lives happily on the pineapple. Thanks for the etiquette lesson everyone!
  • Create New...