Jump to content

Paranoir

Active Members
 View Profile  See their activity

  • Posts

    7

  • Joined

  • Last visited

 Content Type 

Posts posted by Paranoir

    Travel Kit shipped - UPS no update?

    in WiFi Pineapple Mark V

    Posted

    Hey there,

    I ordered the Travel Kit Upgrade on the day of the Mark V release.

    I saw that the shipping would be delayed, and the package would be sent 10/21.

    So, as announced I received an e-mail the 21st, saying that my order had been shipped: "We wanted to let you know that your order (#xxxxx-x) was shipped via UPS, UPS Ground on 10/21/2013.", and of course the Travel Kit is in the Item list.

    But, still this day today, there is absolutely no tracking updates from UPS. It still just says: "Order Processed: Ready for UPS".

    What does this mean? Is there something wrong with my order? Or is it delayed?

    Thanks!

    Client Mode Connect to WPA2-Personal Access Point Fails

    in WiFi Pineapple Mark V

    Posted

    So I got my MK5 today and had to poke around at this issue... Seb is spot on, of course, in that using the Network tile and Client Mode Tab to try to connect to an access point will in some cases result in the encryption option being set to an invalid configuration. But there is a way to fix it....

    First off I was able to get the MK5 some internet via an AP that worked. You could try direct connect with the eth0 port or try an AP without encryption enabled. Either way you'll want to install Whistle Master's WiFi Manager infusion from the pineapple bar. Once you've done that you'll see a couple of new features that really helped me fix the problem... Check out the new Backup Tab. Create one and view it... Scroll down to the bottom and look what it says for 'option encryption'...

    Below is what the Client Mode tab wrote to the etc/config/wireless file.

    config wifi-device 'radio0'

    option type 'mac80211'

    option channel '11'

    option hwmode '11ng'

    option macaddr '00:13:37:a5:08:db'

    option htmode 'HT20'

    list ht_capab 'SHORT-GI-20'

    list ht_capab 'SHORT-GI-40'

    list ht_capab 'RX-STBC1'

    list ht_capab 'DSSS_CCK-40'

    option disabled '0'

    config wifi-iface

    option device 'radio0'

    option network 'lan'

    option mode 'ap'

    option ssid 'Pineapple5_08DB'

    option hidden '0'

    config wifi-device 'radio1'

    option type 'mac80211'

    option hwmode '11g'

    option macaddr '00:13:37:81:42:cb'

    option disabled '0'

    option channel 'auto'

    config wifi-iface

    option device 'radio1'

    option network 'wan'

    option hidden '0'

    option mode 'sta'

    option ssid 'Allen'\''s Network'

    option key 'MyPassword'

    option encryption 'mixed-psk+ccmp'

    But by using the WiFi Manager infusion and changing the settings via the drop down to WPA2 Personal and TKIP and then saving and committing... I got the following written to the new etc/config/wireless file in the Backup Tab.

    Backup [2013-10-18 07-27-32]

    config wifi-device 'radio0'

    option type 'mac80211'

    option channel '11'

    option hwmode '11ng'

    option macaddr '00:13:37:a5:08:db'

    option htmode 'HT20'

    list ht_capab 'SHORT-GI-20'

    list ht_capab 'SHORT-GI-40'

    list ht_capab 'RX-STBC1'

    list ht_capab 'DSSS_CCK-40'

    option disabled '0'

    config wifi-iface

    option device 'radio0'

    option network 'lan'

    option mode 'ap'

    option ssid 'Pineapple5_08DB'

    option hidden '0'

    config wifi-device 'radio1'

    option type 'mac80211'

    option hwmode '11g'

    option macaddr '00:13:37:81:42:cb'

    option disabled '0'

    option channel 'auto'

    config wifi-iface

    option device 'radio1'

    option network 'wan'

    option hidden '0'

    option mode 'sta'

    option ssid 'Allen'\''s Network'

    option key 'MyPassword'

    option encryption 'psk2+tkip'

    A subtle but important difference in that last line. Once I made the change it works great except that you can't disconnect! The DHCP Release doesn't work because the Network tile Client Mode tab is now in charge. I like the stock Client Mode tab idea but it would sure be nice to be able to disable it...

    So hopefully this will help others get up and running until some fixes are worked.

    And on a separate but related topic... I can't seem to get wlan1 to do anything else but the above. I tried to set it up as another AP instead of a Client but that's not working.

    Woohoo!! You are my hero!! Thanks!

    This works perfectly!

    Hope that there will be an official update soon that will fix this bug for good! ;)

    Can markV connect to internet using wifi hotspots.

    in WiFi Pineapple Mark V

    Posted

    Since the Pineapple has 2 built-in radios, you can place one in managed mode and one in master mode. This allows you to connect your Pineapple to a wireless network and share the internet connection with Pineapple clients. Here's how to do it:

    1. Connect to your Pineapple (via ethernet cable or WiFi)

    2. Open a web browser and log into your Pineapple (http://172.16.42.1:1471)

    3. Select the "Network" tile

    4. Select the "Client Mode" tab

    5. Select the drop-down menu and select the WiFi hotspot that you want to connect to

    6. If the network uses WEP or WPA/WPA2 encryption, enter the key

    7. Click "Connect to this network"

    NOTE: The red LED indicator should light up solid.

    That's it, your Pineapple should now be connected to the wireless network that you chose; and your Pineapple clients should have a working internet connection.

    When I do that, my Pineapple WiFi just disappears. And it is definitely not online - even though it says that a connection is initiated.

    And from the network-box in the web-UI:

    Internet IP: Error Connecting

    But both WLAN's are enabled.

    pineapple.png

    Client Mode Connect to WPA2-Personal Access Point Fails

    in WiFi Pineapple Mark V

    Posted · Edited by Paranoir

    "cat /etc/config/*" before enabling Client Mode:

    config autossh
    option ssh '-i /etc/dropbear/id_rsa -N -T -R 2222:localhost:22 user@host'
    option gatetime '0'
    option monitorport '20000'
    option poll '600'

    config 'dnsmasq'
    option 'domainneeded' '1'
    option 'boguspriv' '1'
    option 'filterwin2k' '0'
    option 'localise_queries' '1'
    option 'rebind_protection' '1'
    option 'rebind_localhost' '1'
    option 'local' '/lan/'
    option 'domain' 'lan'
    option 'expandhosts' '1'
    option 'nonegcache' '0'
    option 'authoritative' '1'
    option 'readethers' '1'
    option 'leasefile' '/tmp/dhcp.leases'
    option 'resolvfile' '/tmp/resolv.conf.auto'

    config 'dhcp' 'lan'
    option 'interface' 'lan'
    option 'start' '100'
    option 'limit' '150'
    option 'leasetime' '12h'
    option 'ignore' '0'
    list 'dhcp_option' '3,172.16.42.42'
    list 'dhcp_option' '3,172.16.42.1'
    list 'dhcp_option' '6,172.16.42.1,8.8.8.8'
    list 'dhcp_option' '6,172.16.42.1,208.67.222.222'
    config dropbear
    option PasswordAuth 'on'
    option RootPasswordAuth 'on'
    option Port '22'
    # option BannerFile '/etc/banner'
    config defaults
    option syn_flood 1
    option input ACCEPT
    option output ACCEPT
    option forward REJECT
    # Uncomment this line to disable ipv6 rules
    # option disable_ipv6 1

    config zone
    option name lan
    option network 'lan'
    option input ACCEPT
    option output ACCEPT
    option forward ACCEPT

    config zone
    option name wan
    option network 'wan'
    option input ACCEPT
    option output ACCEPT
    option forward ACCEPT
    option masq 1
    option mtu_fix 1

    config zone
    option name usb
    option network 'usb'
    option input ACCEPT
    option output ACCEPT
    option forward ACCEPT
    option masq 1
    option mtu_fix 1

    config zone
    option name wan2
    option network 'wan2'
    option input ACCEPT
    option output ACCEPT
    option forward ACCEPT
    option masq 1
    option mtu_fix 1


    config forwarding
    option src lan
    option dest wan

    config forwarding
    option src wan
    option dest lan

    config forwarding
    option src lan
    option dest usb

    config forwarding
    option src usb
    option dest lan

    config forwarding
    option src lan
    option dest wan2

    config forwarding
    option src wan2
    option dest lan

    # We need to accept udp packets on port 68,
    # see https://dev.openwrt.org/ticket/4108
    config rule
    option name Allow-DHCP-Renew
    option src wan
    option proto udp
    option dest_port 68
    option target ACCEPT
    option family ipv4

    # Allow IPv4 ping
    config rule
    option name Allow-Ping
    option src wan
    option proto icmp
    option icmp_type echo-request
    option family ipv4
    option target ACCEPT

    # Allow DHCPv6 replies
    # see https://dev.openwrt.org/ticket/10381
    config rule
    option name Allow-DHCPv6
    option src wan
    option proto udp
    option src_ip fe80::/10
    option src_port 547
    option dest_ip fe80::/10
    option dest_port 546
    option family ipv6
    option target ACCEPT

    # Allow essential incoming IPv6 ICMP traffic
    config rule
    option name Allow-ICMPv6-Input
    option src wan
    option proto icmp
    list icmp_type echo-request
    list icmp_type echo-reply
    list icmp_type destination-unreachable
    list icmp_type packet-too-big
    list icmp_type time-exceeded
    list icmp_type bad-header
    list icmp_type unknown-header-type
    list icmp_type router-solicitation
    list icmp_type neighbour-solicitation
    list icmp_type router-advertisement
    list icmp_type neighbour-advertisement
    option limit 1000/sec
    option family ipv6
    option target ACCEPT

    # Allow essential forwarded IPv6 ICMP traffic
    config rule
    option name Allow-ICMPv6-Forward
    option src wan
    option dest *
    option proto icmp
    list icmp_type echo-request
    list icmp_type echo-reply
    list icmp_type destination-unreachable
    list icmp_type packet-too-big
    list icmp_type time-exceeded
    list icmp_type bad-header
    list icmp_type unknown-header-type
    option limit 1000/sec
    option family ipv6
    option target ACCEPT

    # include a file with users custom iptables rules
    config include
    option path /etc/firewall.user


    ### EXAMPLE CONFIG SECTIONS
    # do not allow a specific ip to access wan
    #config rule
    # option src lan
    # option src_ip 192.168.45.2
    # option dest wan
    # option proto tcp
    # option target REJECT

    # block a specific mac on wan
    #config rule
    # option dest wan
    # option src_mac 00:11:22:33:44:66
    # option target REJECT

    # block incoming ICMP traffic on a zone
    #config rule
    # option src lan
    # option proto ICMP
    # option target DROP

    # port redirect port coming in on wan to lan
    #config redirect
    # option src wan
    # option src_dport 80
    # option dest lan
    # option dest_ip 192.168.16.235
    # option dest_port 80
    # option proto tcp

    # port redirect of remapped ssh port (22001) on wan
    #config redirect
    # option src wan
    # option src_dport 22001
    # option dest lan
    # option dest_port 22
    # option proto tcp

    # allow IPsec/ESP and ISAKMP passthrough
    #config rule
    # option src wan
    # option dest lan
    # option protocol esp
    # option target ACCEPT

    #config rule
    # option src wan
    # option dest lan
    # option src_port 500
    # option dest_port 500
    # option proto udp
    # option target ACCEPT

    ### FULL CONFIG SECTIONS
    #config rule
    # option src lan
    # option src_ip 192.168.45.2
    # option src_mac 00:11:22:33:44:55
    # option src_port 80
    # option dest wan
    # option dest_ip 194.25.2.129
    # option dest_port 120
    # option proto tcp
    # option target REJECT

    #config redirect
    # option src lan
    # option src_ip 192.168.45.2
    # option src_mac 00:11:22:33:44:55
    # option src_port 1024
    # option src_dport 80
    # option dest_ip 194.25.2.129
    # option dest_port 120
    # option proto tcp
    config global automount
    option from_fstab 1
    option anon_mount 1

    config global autoswap
    option from_fstab 1
    option anon_swap 0

    config mount
    option target /sd
    option device /dev/sda1
    option fstype auto
    option options rw,sync
    option enabled 1
    option enabled_fsck 0

    config swap
    option device /dev/sda2
    option enabled 1
    # Copyright © 2006 OpenWrt.org

    config interface loopback
    option ifname lo
    option proto static
    option ipaddr 127.0.0.1
    option netmask 255.0.0.0

    config interface lan
    option ifname eth0
    option type bridge
    option proto static
    option ipaddr 172.16.42.1
    option netmask 255.255.255.0
    option gateway 172.16.42.42
    option dns 8.8.8.8

    config interface wan
    option ifname wlan1
    option proto dhcp

    config interface usb
    option ifname usb0
    option proto dhcp

    config interface wan2
    option ifname ' '
    option proto ' '
    option service ' '
    option device ' '
    option apn ' '
    option username ' '
    option password ' '
    option defaultroute ' '
    option ppp_redial ' '
    option peerdns ' '
    option dns ' '
    option keepalive ' '
    option pppd_options ' '

    config system
    option hostname 'Pineapple'
    option timezone 'UTC'

    config timeserver 'ntp'
    list server '0.openwrt.pool.ntp.org'
    list server '1.openwrt.pool.ntp.org'
    list server '2.openwrt.pool.ntp.org'
    list server '3.openwrt.pool.ntp.org'
    option enable_server '0'

    config led
    option name 'ethernet'
    option sysfs 'mk5:amber:lan'
    option trigger 'netdev'
    option dev 'eth0'
    option mode 'link tx rx'

    config led
    option name 'wlan0'
    option sysfs 'mk5:blue:wlan0'
    option trigger 'netdev'
    option dev 'wlan0'
    option mode 'link tx rx'

    config led
    option name 'wlan1'
    option sysfs 'mk5:red:wlan1'
    option trigger 'netdev'
    option dev 'wlan1'
    option mode 'link tx rx'

    config timeserver
    option hostname ptbtime1.ptb.de

    config timeserver
    option hostname time-a.nist.gov

    config timeserver
    option hostname ntp.xs4all.nl

    config timeserver
    option hostname ptbtime2.ptb.de

    config timeserver
    option hostname time-b.nist.gov
    # Server configuration
    config uhttpd main

    option 'index_page' 'index.php'
    option 'error_page' '/index.php'
    # HTTP listen addresses, multiple allowed
    list listen_http 0.0.0.0:80
    # list listen_http [::]:80

    # HTTPS listen addresses, multiple allowed
    list listen_https 0.0.0.0:443
    # list listen_https [::]:443

    # Server document root
    option home /www

    # Reject requests from RFC1918 IP addresses
    # directed to the servers public IP(s).
    # This is a DNS rebinding countermeasure.
    option rfc1918_filter 1

    # Certificate and private key for HTTPS.
    # If no listen_https addresses are given,
    # the key options are ignored.
    option cert /etc/uhttpd.crt
    option key /etc/uhttpd.key

    # CGI url prefix, will be searched in docroot.
    # Default is /cgi-bin
    option cgi_prefix /cgi-bin

    # List of extension->interpreter mappings.
    # Files with an associated interpreter can
    # be called outside of the CGI prefix and do
    # not need to be executable.
    list interpreter ".php=/usr/bin/php-cgi"
    # list interpreter ".cgi=/usr/bin/perl"


    # Lua url prefix and handler script.
    # Lua support is disabled if no prefix given.
    # option lua_prefix /luci
    # option lua_handler /usr/lib/lua/luci/sgi/uhttpd.lua

    # CGI/Lua timeout, if the called script does not
    # write data within the given amount of seconds,
    # the server will terminate the request with
    # 504 Gateway Timeout response.
    option script_timeout 60

    # Network timeout, if the current connection is
    # blocked for the specified amount of seconds,
    # the server will terminate the associated
    # request process.
    option network_timeout 30

    # TCP Keep-Alive, send periodic keep-alive probes
    # over established connections to detect dead peers.
    # The value is given in seconds to specify the
    # interval between subsequent probes.
    # Setting this to 0 will disable TCP keep-alive.
    option tcp_keepalive 1

    # Basic auth realm, defaults to local hostname
    # option realm OpenWrt



    # Certificate defaults for px5g key generator
    config cert px5g

    # Validity time
    option days 730

    # RSA key size
    option bits 1024

    # Location
    option country DE
    option state Berlin
    option location Berlin

    # Common name
    option commonname OpenWrt

    config uhttpd pineapple
    list listen_http 0.0.0.0:1471
    option home /pineapple
    option index_page index.php
    option 'error_page' '/index.php'

    # Configuration file in busybox httpd format
    option config /etc/config/httpd.conf
    option rfc1918_filter 1

    # Certificate and private key for HTTPS.
    # If no listen_https addresses are given,
    # the key options are ignored.
    option cert /etc/uhttpd.crt
    option key /etc/uhttpd.key

    # CGI url prefix, will be searched in docroot.
    # Default is /cgi-bin
    option cgi_prefix /cgi-bin

    # List of extension->interpreter mappings.
    # Files with an associated interpreter can
    # be called outside of the CGI prefix and do
    # not need to be executable.
    list interpreter ".php=/usr/bin/php-cgi"

    # CGI/Lua timeout, if the called script does not
    # write data within the given amount of seconds,
    # the server will terminate the request with
    # 504 Gateway Timeout response.
    option script_timeout 60

    # Network timeout, if the current connection is
    # blocked for the specified amount of seconds,
    # the server will terminate the associated
    # request process.
    option network_timeout 30

    # TCP Keep-Alive, send periodic keep-alive probes
    # over established connections to detect dead peers.
    # The value is given in seconds to specify the
    # interval between subsequent probes.
    # Setting this to 0 will disable TCP keep-alive.
    option tcp_keepalive 1

    config wifi-device radio0
    option type mac80211
    option channel 11
    option hwmode 11g
    option macaddr 00:13:37:xx:xx:xx

    # REMOVE THIS LINE TO ENABLE WIFI:
    # option disabled 1

    config wifi-iface
    option device radio0
    option network lan
    option mode ap
    option ssid Pineapple5_4237
    option encryption none

    config wifi-device radio1
    option type mac80211
    option channel 11
    option hwmode 11ng
    option macaddr 00:13:37:xx:xx:xx
    option htmode HT20
    list ht_capab SHORT-GI-20
    list ht_capab SHORT-GI-40
    list ht_capab RX-STBC1
    list ht_capab DSSS_CCK-40
    # REMOVE THIS LINE TO ENABLE WIFI:
    # option disabled 1

    config wifi-iface
    option device radio1
    option network lan
    option mode ap
    option ssid Pineapple5_0818
    option encryption none

    "cat /etc/config/*" after trying to enable Client Mode:

    config autossh
    option ssh '-i /etc/dropbear/id_rsa -N -T -R 2222:localhost:22 user@host'
    option gatetime '0'
    option monitorport '20000'
    option poll '600'

    config 'dnsmasq'
    option 'domainneeded' '1'
    option 'boguspriv' '1'
    option 'filterwin2k' '0'
    option 'localise_queries' '1'
    option 'rebind_protection' '1'
    option 'rebind_localhost' '1'
    option 'local' '/lan/'
    option 'domain' 'lan'
    option 'expandhosts' '1'
    option 'nonegcache' '0'
    option 'authoritative' '1'
    option 'readethers' '1'
    option 'leasefile' '/tmp/dhcp.leases'
    option 'resolvfile' '/tmp/resolv.conf.auto'

    config 'dhcp' 'lan'
    option 'interface' 'lan'
    option 'start' '100'
    option 'limit' '150'
    option 'leasetime' '12h'
    option 'ignore' '0'
    list 'dhcp_option' '3,172.16.42.42'
    list 'dhcp_option' '3,172.16.42.1'
    list 'dhcp_option' '6,172.16.42.1,8.8.8.8'
    list 'dhcp_option' '6,172.16.42.1,208.67.222.222'
    config dropbear
    option PasswordAuth 'on'
    option RootPasswordAuth 'on'
    option Port '22'
    # option BannerFile '/etc/banner'
    config defaults
    option syn_flood 1
    option input ACCEPT
    option output ACCEPT
    option forward REJECT
    # Uncomment this line to disable ipv6 rules
    # option disable_ipv6 1

    config zone
    option name lan
    option network 'lan'
    option input ACCEPT
    option output ACCEPT
    option forward ACCEPT

    config zone
    option name wan
    option network 'wan'
    option input ACCEPT
    option output ACCEPT
    option forward ACCEPT
    option masq 1
    option mtu_fix 1

    config zone
    option name usb
    option network 'usb'
    option input ACCEPT
    option output ACCEPT
    option forward ACCEPT
    option masq 1
    option mtu_fix 1

    config zone
    option name wan2
    option network 'wan2'
    option input ACCEPT
    option output ACCEPT
    option forward ACCEPT
    option masq 1
    option mtu_fix 1


    config forwarding
    option src lan
    option dest wan

    config forwarding
    option src wan
    option dest lan

    config forwarding
    option src lan
    option dest usb

    config forwarding
    option src usb
    option dest lan

    config forwarding
    option src lan
    option dest wan2

    config forwarding
    option src wan2
    option dest lan

    # We need to accept udp packets on port 68,
    # see https://dev.openwrt.org/ticket/4108
    config rule
    option name Allow-DHCP-Renew
    option src wan
    option proto udp
    option dest_port 68
    option target ACCEPT
    option family ipv4

    # Allow IPv4 ping
    config rule
    option name Allow-Ping
    option src wan
    option proto icmp
    option icmp_type echo-request
    option family ipv4
    option target ACCEPT

    # Allow DHCPv6 replies
    # see https://dev.openwrt.org/ticket/10381
    config rule
    option name Allow-DHCPv6
    option src wan
    option proto udp
    option src_ip fe80::/10
    option src_port 547
    option dest_ip fe80::/10
    option dest_port 546
    option family ipv6
    option target ACCEPT

    # Allow essential incoming IPv6 ICMP traffic
    config rule
    option name Allow-ICMPv6-Input
    option src wan
    option proto icmp
    list icmp_type echo-request
    list icmp_type echo-reply
    list icmp_type destination-unreachable
    list icmp_type packet-too-big
    list icmp_type time-exceeded
    list icmp_type bad-header
    list icmp_type unknown-header-type
    list icmp_type router-solicitation
    list icmp_type neighbour-solicitation
    list icmp_type router-advertisement
    list icmp_type neighbour-advertisement
    option limit 1000/sec
    option family ipv6
    option target ACCEPT

    # Allow essential forwarded IPv6 ICMP traffic
    config rule
    option name Allow-ICMPv6-Forward
    option src wan
    option dest *
    option proto icmp
    list icmp_type echo-request
    list icmp_type echo-reply
    list icmp_type destination-unreachable
    list icmp_type packet-too-big
    list icmp_type time-exceeded
    list icmp_type bad-header
    list icmp_type unknown-header-type
    option limit 1000/sec
    option family ipv6
    option target ACCEPT

    # include a file with users custom iptables rules
    config include
    option path /etc/firewall.user


    ### EXAMPLE CONFIG SECTIONS
    # do not allow a specific ip to access wan
    #config rule
    # option src lan
    # option src_ip 192.168.45.2
    # option dest wan
    # option proto tcp
    # option target REJECT

    # block a specific mac on wan
    #config rule
    # option dest wan
    # option src_mac 00:11:22:33:44:66
    # option target REJECT

    # block incoming ICMP traffic on a zone
    #config rule
    # option src lan
    # option proto ICMP
    # option target DROP

    # port redirect port coming in on wan to lan
    #config redirect
    # option src wan
    # option src_dport 80
    # option dest lan
    # option dest_ip 192.168.16.235
    # option dest_port 80
    # option proto tcp

    # port redirect of remapped ssh port (22001) on wan
    #config redirect
    # option src wan
    # option src_dport 22001
    # option dest lan
    # option dest_port 22
    # option proto tcp

    # allow IPsec/ESP and ISAKMP passthrough
    #config rule
    # option src wan
    # option dest lan
    # option protocol esp
    # option target ACCEPT

    #config rule
    # option src wan
    # option dest lan
    # option src_port 500
    # option dest_port 500
    # option proto udp
    # option target ACCEPT

    ### FULL CONFIG SECTIONS
    #config rule
    # option src lan
    # option src_ip 192.168.45.2
    # option src_mac 00:11:22:33:44:55
    # option src_port 80
    # option dest wan
    # option dest_ip 194.25.2.129
    # option dest_port 120
    # option proto tcp
    # option target REJECT

    #config redirect
    # option src lan
    # option src_ip 192.168.45.2
    # option src_mac 00:11:22:33:44:55
    # option src_port 1024
    # option src_dport 80
    # option dest_ip 194.25.2.129
    # option dest_port 120
    # option proto tcp
    config global automount
    option from_fstab 1
    option anon_mount 1

    config global autoswap
    option from_fstab 1
    option anon_swap 0

    config mount
    option target /sd
    option device /dev/sda1
    option fstype auto
    option options rw,sync
    option enabled 1
    option enabled_fsck 0

    config swap
    option device /dev/sda2
    option enabled 1
    # Copyright © 2006 OpenWrt.org

    config interface loopback
    option ifname lo
    option proto static
    option ipaddr 127.0.0.1
    option netmask 255.0.0.0

    config interface lan
    option ifname eth0
    option type bridge
    option proto static
    option ipaddr 172.16.42.1
    option netmask 255.255.255.0
    option gateway 172.16.42.42
    option dns 8.8.8.8

    config interface wan
    option ifname wlan1
    option proto dhcp

    config interface usb
    option ifname usb0
    option proto dhcp

    config interface wan2
    option ifname ' '
    option proto ' '
    option service ' '
    option device ' '
    option apn ' '
    option username ' '
    option password ' '
    option defaultroute ' '
    option ppp_redial ' '
    option peerdns ' '
    option dns ' '
    option keepalive ' '
    option pppd_options ' '

    config system
    option hostname 'Pineapple'
    option timezone 'UTC'

    config timeserver 'ntp'
    list server '0.openwrt.pool.ntp.org'
    list server '1.openwrt.pool.ntp.org'
    list server '2.openwrt.pool.ntp.org'
    list server '3.openwrt.pool.ntp.org'
    option enable_server '0'

    config led
    option name 'ethernet'
    option sysfs 'mk5:amber:lan'
    option trigger 'netdev'
    option dev 'eth0'
    option mode 'link tx rx'

    config led
    option name 'wlan0'
    option sysfs 'mk5:blue:wlan0'
    option trigger 'netdev'
    option dev 'wlan0'
    option mode 'link tx rx'

    config led
    option name 'wlan1'
    option sysfs 'mk5:red:wlan1'
    option trigger 'netdev'
    option dev 'wlan1'
    option mode 'link tx rx'

    config timeserver
    option hostname ptbtime1.ptb.de

    config timeserver
    option hostname time-a.nist.gov

    config timeserver
    option hostname ntp.xs4all.nl

    config timeserver
    option hostname ptbtime2.ptb.de

    config timeserver
    option hostname time-b.nist.gov
    # Server configuration
    config uhttpd main

    option 'index_page' 'index.php'
    option 'error_page' '/index.php'
    # HTTP listen addresses, multiple allowed
    list listen_http 0.0.0.0:80
    # list listen_http [::]:80

    # HTTPS listen addresses, multiple allowed
    list listen_https 0.0.0.0:443
    # list listen_https [::]:443

    # Server document root
    option home /www

    # Reject requests from RFC1918 IP addresses
    # directed to the servers public IP(s).
    # This is a DNS rebinding countermeasure.
    option rfc1918_filter 1

    # Certificate and private key for HTTPS.
    # If no listen_https addresses are given,
    # the key options are ignored.
    option cert /etc/uhttpd.crt
    option key /etc/uhttpd.key

    # CGI url prefix, will be searched in docroot.
    # Default is /cgi-bin
    option cgi_prefix /cgi-bin

    # List of extension->interpreter mappings.
    # Files with an associated interpreter can
    # be called outside of the CGI prefix and do
    # not need to be executable.
    list interpreter ".php=/usr/bin/php-cgi"
    # list interpreter ".cgi=/usr/bin/perl"


    # Lua url prefix and handler script.
    # Lua support is disabled if no prefix given.
    # option lua_prefix /luci
    # option lua_handler /usr/lib/lua/luci/sgi/uhttpd.lua

    # CGI/Lua timeout, if the called script does not
    # write data within the given amount of seconds,
    # the server will terminate the request with
    # 504 Gateway Timeout response.
    option script_timeout 60

    # Network timeout, if the current connection is
    # blocked for the specified amount of seconds,
    # the server will terminate the associated
    # request process.
    option network_timeout 30

    # TCP Keep-Alive, send periodic keep-alive probes
    # over established connections to detect dead peers.
    # The value is given in seconds to specify the
    # interval between subsequent probes.
    # Setting this to 0 will disable TCP keep-alive.
    option tcp_keepalive 1

    # Basic auth realm, defaults to local hostname
    # option realm OpenWrt



    # Certificate defaults for px5g key generator
    config cert px5g

    # Validity time
    option days 730

    # RSA key size
    option bits 1024

    # Location
    option country DE
    option state Berlin
    option location Berlin

    # Common name
    option commonname OpenWrt

    config uhttpd pineapple
    list listen_http 0.0.0.0:1471
    option home /pineapple
    option index_page index.php
    option 'error_page' '/index.php'

    # Configuration file in busybox httpd format
    option config /etc/config/httpd.conf
    option rfc1918_filter 1

    # Certificate and private key for HTTPS.
    # If no listen_https addresses are given,
    # the key options are ignored.
    option cert /etc/uhttpd.crt
    option key /etc/uhttpd.key

    # CGI url prefix, will be searched in docroot.
    # Default is /cgi-bin
    option cgi_prefix /cgi-bin

    # List of extension->interpreter mappings.
    # Files with an associated interpreter can
    # be called outside of the CGI prefix and do
    # not need to be executable.
    list interpreter ".php=/usr/bin/php-cgi"

    # CGI/Lua timeout, if the called script does not
    # write data within the given amount of seconds,
    # the server will terminate the request with
    # 504 Gateway Timeout response.
    option script_timeout 60

    # Network timeout, if the current connection is
    # blocked for the specified amount of seconds,
    # the server will terminate the associated
    # request process.
    option network_timeout 30

    # TCP Keep-Alive, send periodic keep-alive probes
    # over established connections to detect dead peers.
    # The value is given in seconds to specify the
    # interval between subsequent probes.
    # Setting this to 0 will disable TCP keep-alive.
    option tcp_keepalive 1


    config wifi-device 'radio0'
    option type 'mac80211'
    option channel '11'
    option hwmode '11g'
    option macaddr '00:13:37:xx:xx:xx'

    config wifi-iface
    option device 'radio0'
    option network 'lan'
    option mode 'ap'
    option ssid 'Pineapple5_4237'
    option encryption 'none'

    config wifi-device 'radio1'
    option type 'mac80211'
    option channel '11'
    option hwmode '11ng'
    option macaddr '00:13:37:xx:xx:xx'
    option htmode 'HT20'
    list ht_capab 'SHORT-GI-20'
    list ht_capab 'SHORT-GI-40'
    list ht_capab 'RX-STBC1'
    list ht_capab 'DSSS_CCK-40'

    config wifi-iface
    option device 'radio1'
    option mode 'sta'
    option network 'wan'
    option ssid 'The Fucking NSA'
    option key 'password'
    option encryption 'mixed-psk+ccmp'

    dmesg Output:

    [ 0.000000] Linux version 3.3.8 (sebkinne@buildtop) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #16 Fri Oct 11 21:42:39 PDT 2013
    [ 0.000000] MyLoader: sysp=xxxxxxx, boardp=xxxxxxxx, parts=xxxxxxxx
    [ 0.000000] bootconsole [early0] enabled
    [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
    [ 0.000000] SoC: Atheros AR9330 rev 1
    [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
    [ 0.000000] Determined physical RAM map:
    [ 0.000000] memory: 04000000 @ 00000000 (usable)
    [ 0.000000] Initrd not found or empty - disabling initrd
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] Normal 0x00000000 -> 0x00004000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000000 -> 0x00004000
    [ 0.000000] On node 0 totalpages: 16384
    [ 0.000000] free_area_init_node: node 0, pgdat 802d8470, node_mem_map 81000000
    [ 0.000000] Normal zone: 128 pages used for memmap
    [ 0.000000] Normal zone: 0 pages reserved
    [ 0.000000] Normal zone: 16256 pages, LIFO batch:3
    [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
    [ 0.000000] pcpu-alloc: [0] 0
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
    [ 0.000000] Kernel command line: board=MK5 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
    [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
    [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
    [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
    [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
    [ 0.000000] Writing ErrCtl register=00000000
    [ 0.000000] Readback ErrCtl register=00000000
    [ 0.000000] Memory: 61596k/65536k available (2124k kernel code, 3940k reserved, 405k data, 208k init, 0k highmem)
    [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    [ 0.000000] NR_IRQS:51
    [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
    [ 0.080000] pid_max: default: 32768 minimum: 301
    [ 0.080000] Mount-cache hash table entries: 512
    [ 0.090000] NET: Registered protocol family 16
    [ 0.090000] gpiochip_add: registered GPIOs 0 to 29 on device: ath79
    [ 0.100000] MIPS: machine is MK5 V1.0
    [ 0.350000] bio: create slab at 0
    [ 0.360000] Switching to clocksource MIPS
    [ 0.360000] NET: Registered protocol family 2
    [ 0.370000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
    [ 0.370000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
    [ 0.380000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
    [ 0.380000] TCP: Hash tables configured (established 2048 bind 2048)
    [ 0.390000] TCP reno registered
    [ 0.390000] UDP hash table entries: 256 (order: 0, 4096 bytes)
    [ 0.400000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
    [ 0.400000] NET: Registered protocol family 1
    [ 0.410000] PCI: CLS 0 bytes, default 32
    [ 0.430000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [ 0.430000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc.
    [ 0.440000] msgmni has been set to 120
    [ 0.440000] io scheduler noop registered
    [ 0.450000] io scheduler deadline registered (default)
    [ 0.450000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
    [ 0.460000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
    [ 0.460000] console [ttyATH0] enabled, bootconsole disabled
    [ 0.480000] m25p80 spi0.0: found w25q128, expected m25p80
    [ 0.480000] m25p80 spi0.0: w25q128 (16384 Kbytes)
    [ 0.490000] 5 tp-link partitions found on MTD device spi0.0
    [ 0.490000] Creating 5 MTD partitions on "spi0.0":
    [ 0.500000] 0x000000000000-0x000000020000 : "u-boot"
    [ 0.510000] 0x000000020000-0x000000102744 : "kernel"
    [ 0.510000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
    [ 0.520000] 0x000000102744-0x000000ff0000 : "rootfs"
    [ 0.530000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
    [ 0.540000] mtd: partition "rootfs" set to be root filesystem
    [ 0.550000] mtd: partition "rootfs_data" created automatically, ofs=BB0000, len=440000
    [ 0.550000] 0x000000bb0000-0x000000ff0000 : "rootfs_data"
    [ 0.560000] 0x000000ff0000-0x000001000000 : "art"
    [ 0.570000] 0x000000020000-0x000000ff0000 : "firmware"
    [ 0.590000] ag71xx_mdio: probed
    [ 0.590000] eth0: Atheros AG71xx at 0xb9000000, irq 4
    [ 1.150000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:04 [uid=xxxxxxxx, driver=Generic PHY]
    [ 1.160000] TCP cubic registered
    [ 1.160000] NET: Registered protocol family 17
    [ 1.160000] Bridge firewalling registered
    [ 1.170000] 8021q: 802.1Q VLAN Support v1.8
    [ 1.180000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
    [ 1.180000] Freeing unused kernel memory: 208k freed
    [ 3.630000] Registered led device: mk5:red:wlan1
    [ 3.630000] Registered led device: mk5:blue:wlan0
    [ 3.630000] Registered led device: mk5:amber:lan
    [ 6.150000] eth0: link up (100Mbps/Full duplex)
    [ 6.940000] JFFS2 notice: (419) jffs2_build_xattr_subsystem: complete building xattr subsystem, 3 of xdatum (0 unchecked, 2 orphan) and 26 of xref (0 dead, 9 orphan) found.
    [ 7.950000] SCSI subsystem initialized
    [ 8.240000] usbcore: registered new interface driver usbfs
    [ 8.250000] usbcore: registered new interface driver hub
    [ 8.250000] usbcore: registered new device driver usb
    [ 8.810000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 8.820000] ehci-platform ehci-platform: Generic Platform EHCI Controller
    [ 8.820000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
    [ 8.860000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
    [ 8.880000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
    [ 8.880000] hub 1-0:1.0: USB hub found
    [ 8.880000] hub 1-0:1.0: 1 port detected
    [ 9.010000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 9.140000] uhci_hcd: USB Universal Host Controller Interface driver
    [ 9.260000] Initializing USB Mass Storage driver...
    [ 9.270000] usbcore: registered new interface driver usb-storage
    [ 9.270000] USB Mass Storage support registered.
    [ 9.380000] usb 1-1: new high-speed USB device number 2 using ehci-platform
    [ 9.530000] hub 1-1:1.0: USB hub found
    [ 9.530000] hub 1-1:1.0: 4 ports detected
    [ 9.810000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
    [ 10.030000] usb 1-1.4: new high-speed USB device number 4 using ehci-platform
    [ 10.160000] scsi0 : usb-storage 1-1.4:1.0
    [ 11.160000] scsi 0:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
    [ 11.170000] sd 0:0:0:0: [sda] Attached SCSI removable disk
    [ 29.750000] eth0: link down
    [ 30.760000] Loading modules backported from Linux version master-2013-06-27-0-gdcfa6d5
    [ 30.770000] Backport generated by backports.git backports-20130617-4-ge3220f5
    [ 30.880000] cfg80211: Calling CRDA to update world regulatory domain
    [ 30.880000] cfg80211: World regulatory domain updated:
    [ 30.890000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [ 30.900000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 30.910000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [ 30.910000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [ 30.920000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 30.930000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 32.500000] usbcore: registered new interface driver rt73usb
    [ 32.550000] ath: EEPROM regdomain: 0x0
    [ 32.550000] ath: EEPROM indicates default country code should be used
    [ 32.550000] ath: doing EEPROM country->regdmn map search
    [ 32.550000] ath: country maps to regdmn code: 0x3a
    [ 32.550000] ath: Country alpha2 being used: US
    [ 32.550000] ath: Regpair used: 0x3a
    [ 32.560000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 32.560000] Registered led device: ath9k-phy0
    [ 32.560000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
    [ 32.570000] cfg80211: Calling CRDA for country: US
    [ 32.570000] cfg80211: Regulatory domain changed to country: US
    [ 32.580000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [ 32.580000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
    [ 32.590000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
    [ 32.600000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 32.610000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 32.610000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 32.620000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
    [ 32.650000] usbcore: registered new interface driver rt2800usb
    [ 33.060000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
    [ 33.060000] ieee80211 phy1: hwaddr 00:13:37:xx:xx:xx, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
    [ 33.090000] rtl8187: Customer ID is 0x46
    [ 33.090000] Registered led device: rtl8187-phy1::radio
    [ 33.090000] Registered led device: rtl8187-phy1::tx
    [ 33.090000] Registered led device: rtl8187-phy1::rx
    [ 33.090000] rtl8187: wireless switch is on
    [ 33.090000] usbcore: registered new interface driver rtl8187
    [ 33.110000] Button Hotplug driver version 0.4.1
    [ 33.330000] RPC: Registered named UNIX socket transport module.
    [ 33.330000] RPC: Registered udp transport module.
    [ 33.340000] RPC: Registered tcp transport module.
    [ 33.340000] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 33.600000] PPP generic driver version 2.4.2
    [ 33.630000] tun: Universal TUN/TAP device driver, 1.6
    [ 33.640000] tun: © 1999-2004 Max Krasnyansky
    [ 33.900000] ip_tables: © 2000-2006 Netfilter Core Team
    [ 34.140000] NET: Registered protocol family 24
    [ 34.280000] nf_conntrack version 0.5.0 (965 buckets, 3860 max)
    [ 35.000000] xt_time: kernel timezone is -0000
    [ 35.470000] usbcore: registered new interface driver ath9k_htc
    [ 35.710000] usbcore: registered new interface driver usbserial
    [ 35.710000] USB Serial support registered for generic
    [ 35.720000] usbcore: registered new interface driver usbserial_generic
    [ 35.720000] usbserial: USB Serial Driver core
    [ 35.870000] usbcore: registered new interface driver asix
    [ 35.990000] usbcore: registered new interface driver cdc_ether
    [ 36.110000] Error: Driver 'gpio-keys-polled' is already registered, aborting...
    [ 36.220000] usbcore: registered new interface driver rndis_host
    [ 36.350000] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 41.050000] usbcore: deregistering interface driver usbserial_generic
    [ 41.060000] USB Serial deregistering driver generic
    [ 41.060000] usbcore: deregistering interface driver usbserial
    [ 41.110000] usbcore: registered new interface driver usbserial
    [ 41.110000] USB Serial support registered for generic
    [ 41.120000] usbcore: registered new interface driver usbserial_generic
    [ 41.120000] usbserial: USB Serial Driver core
    [ 42.050000] usbcore: deregistering interface driver usbserial_generic
    [ 42.060000] USB Serial deregistering driver generic
    [ 42.060000] usbcore: deregistering interface driver usbserial
    [ 42.320000] usbcore: registered new interface driver usbserial
    [ 42.330000] USB Serial support registered for generic
    [ 42.330000] usbcore: registered new interface driver usbserial_generic
    [ 42.340000] usbserial: USB Serial Driver core
    [ 42.810000] usbcore: deregistering interface driver usbserial_generic
    [ 42.810000] USB Serial deregistering driver generic
    [ 42.820000] usbcore: deregistering interface driver usbserial
    [ 42.870000] usbcore: registered new interface driver usbserial
    [ 42.870000] USB Serial support registered for generic
    [ 42.880000] usbcore: registered new interface driver usbserial_generic
    [ 42.880000] usbserial: USB Serial Driver core
    [ 43.230000] usbcore: deregistering interface driver usbserial_generic
    [ 43.230000] USB Serial deregistering driver generic
    [ 43.240000] usbcore: deregistering interface driver usbserial
    [ 43.280000] usbcore: registered new interface driver usbserial
    [ 43.280000] USB Serial support registered for generic
    [ 43.290000] usbcore: registered new interface driver usbserial_generic
    [ 43.290000] usbserial: USB Serial Driver core
    [ 43.710000] device eth0 entered promiscuous mode
    [ 44.640000] eth0: link up (100Mbps/Full duplex)
    [ 44.640000] br-lan: port 1(eth0) entered forwarding state
    [ 44.650000] br-lan: port 1(eth0) entered forwarding state
    [ 46.650000] br-lan: port 1(eth0) entered forwarding state
    [ 52.240000] device wlan0 entered promiscuous mode
    [ 52.280000] br-lan: port 2(wlan0) entered forwarding state
    [ 52.290000] br-lan: port 2(wlan0) entered forwarding state
    [ 54.290000] br-lan: port 2(wlan0) entered forwarding state
    [ 176.890000] device wlan0 left promiscuous mode
    [ 176.890000] br-lan: port 2(wlan0) entered disabled state
    [ 181.950000] device wlan0 entered promiscuous mode
    [ 182.090000] br-lan: port 2(wlan0) entered forwarding state
    [ 182.090000] br-lan: port 2(wlan0) entered forwarding state
    [ 184.090000] br-lan: port 2(wlan0) entered forwarding state
    [ 425.750000] device wlan0 left promiscuous mode
    [ 425.750000] br-lan: port 2(wlan0) entered disabled state

    Command "wifi" via SSH output:

    Failed to start hostapd for phy1
command failed: Device or resource busy (-16)
Successfully initialized wpa_supplicant

    I did all this after a factory reset.

    I also tried booting it up afterwards without the MicroSD card inserted.

    Nothing seems to work.

    This is a 2.4GHz WiFi - CISCO Router.

×
×
  • Create New...