iknox
-
Posts
15 -
Joined
-
Last visited
Posts posted by iknox
-
-
My ssl strip wont install and I have tried to redownload i shows up with 0kb and no gui. I was able to get it to download to the internal memory but when i try to install it to usb or internal it just says loading then stops and nothing even after a refresh.
-
Just a question. I recently bought my Mark IV then a Mark V I am not looking for a trade in or a return I just want to know if the Mark IV is dead to the Hak5 Crew?
-
+1@darren
could you see doing some tutorials on metasploit with the mk5 in the future or is that past the scope or depth of the show for the audience? I'm pretty good with metasploit but its so indepth/complex/big there is something always new to learn and seeing how mk5 and metasploit can play together would be nice.
-
Murphy's 3rd law: "Make something idiot-proof, and they will build a better idiot" ;-)
Are you going to be able to keep up with the orders? I ordered mine last-night too.
-
I do not understand. Why would I need a standalone reaver box? All it does is brute force WPS?
-
Hi,
I mistakenly bought the Anker 3E which has 2 x 5v outputs and i've been reading here that this is wrong for the pineapple. The thing is it works!
Are there any dangers running it on 5v? Would it damage the pineapple at all?
is it running and reading the usb?
-
I'm just wondering if anyone else has had the same experience as me.
Reset 3.0.0, setup usb for 1.5gb swap 6gb storage, install new pineapple bar, install WM's 1.1 sslstrip and urlsnarf to usb, install wifi manager to internal. run sslstrip and urlsnarf. pineapple slows to a crawl, freezes up, and crashes.
//edit: similarly, running karma and sslstrip at the same time will cause the same effect. this effect also seems to be triggered by opening any tile while the infusions are running (but it could be a coincidence as my testing isn't perfectly scientific)
//edit: if you would like me to help test things I would be more than willing to, as of right now it seems like 3.0.0 is more or less not usable
//edit: another test: with urlsnarf, karma, and wifi manager being the only installed injections it appeared I was able to start and run them without errors. Then after installing and running sslstrip in addition to urlsnarf and karma it appeared to work but I was unable to pull up webpages on my "victim". I then attempted to open the urlsnarf tile and the pineapple crashed.
All my testing has been using wall power for both the pineapple and the hub, every test has been on a clean reset of 3.0.0 and the usb has been wiped between each test as well.
//more testing: It appears the problem is within sslstrip, simply running sslstrip by itself and navigating to a website on my "victim" will kill the pineapple, the injection does appear to function -before it kills the pineapple- as the page began to load regular http. I am going to do another test to confirm this.
//a bunch more testing: it appears that either there is something wrong with my pineapple or 3.0.0 I have been able to get it to work by installing no more than 3 infusions (with ~450 internal space remaining). it seems like the pineapple is just overloaded by simple tasks. ssl strip while using jammer on a different interface, thats a crash. sslstrip while running karma, thats potentially a crash.. Assuming that my pineapple is in fact okay I believe that 3.0.0 is just completely not ready for actual use. I could definitely be doing something wrong but hopefully my testing and this thread can help someone who knows more than me.
I am having the same trouble were you able to find a fix?
-
i do think the new web interface is 172.16.41.1:1471
-
your lenmar will not power pineapple propertly. get additional 9v/12v power source.
You are very right I just found that out the hard way. No worries I just ordered the Anker Astro Pro 14400mAh. I will be returning the lenmar.
-
So seeing that hak5 is sold out of the elite package. I decided to put together my own. Thank to the hak5 team for sending my pineapple fast. I would have made my own pineapple but the router is hard to find. I order a yagi ant. and a 2 watt amp both being shipped from china so they are not in the pic. Here are the specs.
1x wifi pineapple
1x Alfa 036H (The best card)
1x Alfa 036NHA
1x Alfa 051NH (2nd best)
1x Alfa 7dBi directional ant
1x 25dBi yagi ant
1x 2000mw wifi amplifier
2x sma extensions
1x 4-port usb hub w/ external power option
1x usb to barrel 1mm for usb hub
1x usb to barrel for pineapple
1x lenmar undead power 11000mAh 1/2.4A max 2/1A max 3/1A max
1x SanDisk 4GB Cruzer Fit
1x cat5 patch cable
1x Pelican 1050 Case
I hope this all comes together nicely. I will post stats when I am done installing everything in the box. -
Yes, it could... Try to SSH into your pineapple after you have done the WP4.sh script, then execute
ping -c 3 google.com
If you get replys, your online :)Nope not getting replays I even tried hooking it to my router into the wan still no luck
-
Seems like a stupid question, but are you sure 192.168.1.1 is actually the router? and not 2.x?
well seeing as that is my gateway and that those numbers worked before just fine..... Can this have something to do with the wifipineapple.com site down?
-
This is from the laptop
ifconfig
eth0 Link encap:Ethernet HWaddr
inet addr:172.16.42.249 Bcast:172.16.42.255 Mask:255.255.255.0
inet6 addr: fe80::223:8bff:fe58:fd41/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:10805 errors:0 dropped:0 overruns:0 frame:0
TX packets:11226 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1086426 (1.0 MiB) TX bytes:1388354 (1.3 MiB)
Interrupt:17
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:98 errors:0 dropped:0 overruns:0 frame:0
TX packets:98 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:7026 (6.8 KiB) TX bytes:7026 (6.8 KiB)
wlan0 Link encap:Ethernet HWaddr
inet addr:192.168.1.14 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: 2002:468c:b287:e472:222:faff:fe14:f5d4/64 Scope:Global
inet6 addr: 2002:468c:b287:e472:3ccc:b647:972c:8119/64 Scope:Global
inet6 addr: fe80::222:faff:fe14:f5d4/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:17675 errors:0 dropped:0 overruns:0 frame:0
TX packets:10791 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:9902975 (9.4 MiB) TX bytes:1623556 (1.5 MiB) -
I am working on Kali and i just got my pineapple yesterday. I was able to first use wp4 to share the laptop wifi connect and I would access the Web Gui to the pineapple. I am no longer able to see the "show ip" under network it just now just says loadings no errors just continues to say loading. It will not load the pineapple bar and I do not understand what is wrong. I reset the pineapple still the same problem wp4 is not sharing the connection anymore.
I am connected from the laptop to the POE/Lan port.
| | / (_) ____(_) / __ \(_)___ ___ ____ _____ ____ / /__
| | /| / / / /_ / / / /_/ / / __ \/ _ \/ __ '/ __ \/ __ \/ / _ \
| |/ |/ / / __/ / / / ____/ / / / / __/ /_/ / /_/ / /_/ / / __/
|__/|__/_/_/ /_/ /_/ /_/_/ /_/\___/\__,_/ .___/ .___/_/\___/
OWN the Network v.2.1Pineapple Netmask [255.255.255.0]:
Pineapple Network [172.16.42.0/24]:
Interface between PC and Pineapple [eth0]:
Interface between PC and Internet [wlan0]:
Internet Gateway [172.16.42.1]: 192.168.1.1
IP Address of Host PC [172.16.42.42]:
IP Address of Pineapple [172.16.42.1]:
_ . ___ \||/ Internet: 192.168.1.1 - wlan0
( _ )_ <--> [___] <--> ,<><>, Computer: 172.16.42.42
(_ _(_ ,) \___\ '<><>' Pineapple: 172.16.42.0/24 - eth0
SIOCDELRT: No such process
Browse toRoute
Kernel IP routing tableDestination Gateway Genmask Flags Metric Ref Use Ifacedefault 172.16.42.42 0.0.0.0 UG 0 0 0 br-lan172.16.42.0 * 255.255.255.0 U 0 0 0 br-lan
Ifconfig
Kernel IP routing tableDestination Gateway Genmask Flags Metric Ref Use Ifacedefault 172.16.42.42 0.0.0.0 UG 0 0 0 br-lan172.16.42.0 * 255.255.255.0 U 0 0 0 br-lanbr-lan Link encap:Ethernet HWaddr inet addr:172.16.42.1 Bcast:172.16.42.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:819 errors:0 dropped:12 overruns:0 frame:0 TX packets:788 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:59770 (58.3 KiB) TX bytes:64527 (63.0 KiB)eth0 Link encap:Ethernet HWaddr UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:829 errors:0 dropped:6 overruns:0 frame:0 TX packets:788 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:73072 (71.3 KiB) TX bytes:64527 (63.0 KiB) Interrupt:5eth1 Link encap:Ethernet HWaddr UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:4lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:156 errors:0 dropped:0 overruns:0 frame:0 TX packets:156 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:12814 (12.5 KiB) TX bytes:12814 (12.5 KiB)wlan0 Link encap:Ethernet HWaddr UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:83 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:6564 (6.4 KiB)
Darrens early acting career.
in Everything Else
Posted · Edited by iknox
Tremors 2 Darren apparently got his start. LOL
I see they resemble each other very well.
What do you guys think?
BTW thank you Darren for my Mark V :)