sudoman

I have finally managed to connect to an AP on wlan1 and share internet to wlan0. Is it possible to be able to access the UI (172.16.42.1:1471) from the wlan1 connection? If I connect directly to the pineapple AP or connect an ethernet cable to it accessing the UI is no problem, but probing the IP of wlan1 on the standard port returns nothing, which seems weird to me since I can access it from the ethernet's IP, both of which are assigned with DHCP. Thanks in advance.

WM, Thanks, re-flashing seems to have done the trick. However, it still shows up as being in monitor mode, not allowing me to make a DHCP request. If I click on Stop Monitor, the interface gets disabled. Upon re-enabling it, it is back on monitor mode. However, if I disable the interface and the re-enable it, I can do a DHCP request successfully -- but it show up as being in monitor mode. Just a quirk but it might bug future new users. Thanks again for the continuing support.

root@Pineapple:~# cat /etc/config/wireless config wifi-device 'radio0' option type 'mac80211' option channel '11' option hwmode '11ng' option macaddr 'XX:XX:XX:XX:XX:XX' option htmode 'HT20' list ht_capab 'SHORT-GI-20' list ht_capab 'SHORT-GI-40' list ht_capab 'RX-STBC1' list ht_capab 'DSSS_CCK-40' option disabled '0' config wifi-iface option device 'radio0' option network 'lan' option mode 'ap' option ssid 'pineapple XX:XX' option hidden '0' config wifi-device 'radio1' option type 'mac80211' option hwmode '11ng' option macaddr 'XX:XX:XX:XX:XX:XX' option htmode 'HT20' list ht_capab 'SHORT-GI-20' list ht_capab 'SHORT-GI-40' list ht_capab 'RX-STBC1' list ht_capab 'DSSS_CCK-40' option disabled '0' option channel 'auto' config wifi-iface option device 'radio1' option hidden '0' option ssid 'xxxxxxxxx' option mode 'sta' option network 'wan' option key 'xxxxxxxxx' option encryption 'psk2+tkip+aes' config wifi-device 'radio2' option type 'mac80211' option hwmode '11g' option macaddr ''XX:XX:XX:XX:XX:XX'' option disabled '0' option channel 'auto' config wifi-iface option device 'radio2' option mode 'sta' option ssid 'xxxxxxxxx' option network 'wan' option hidden '0' option key 'xxxxxxxxxxxxxxx' option encryption 'psk2+tkip+aes'

WM, First off, thank you for your most recent update fixing your modules. Was able to get them installed fine on my Mark IV on 3.0.0. However, still having some problems with Wifi Manager. I'm trying to use my second interface to connect to an AP in order to set up ICS that way. A couple of issues I'm having: 1. After saving and committing changes, the interface seems to connect to the AP, but upon closing and opening Wifi Manager, it shows that the interface is in monitor mode. If I stop monitor mode, the interface gets disabled, and when re-enabled I go back to where I started. 2. For a brief moment, in between re-enabling and before closing Wifi Manager, the interface does not show up as being in monitor mode, but it does not give me the option to make DHCP request under Interfaces IP. 3. Additionally, Physical Interfaces shows up as having 3 radios, as opposed to two from before the updates. Not sure which one is right but I'm pretty sure it was correct before: Physical Interfaces radio0 wlan1 enabled [xx:xx:xx:xx:xx:xx] [Random Mac] radio1 - enabled radio2 wlan0 enabled [xx:xx:xx:xx:xx:xx] [Random Mac] 4. The reason why I think that it does manage to connect to the AP, even though it does show up as in Monitor Mode under WIfi Manager and Site Survey is the following iwconfig output from ssh: root@Pineapple:~# iwconfig lo no wireless extensions. wlan1 IEEE 802.11bg ESSID:"xxx" Mode:Managed Frequency:2.432 GHz Access Point: xx:xx:xx:xx:xx:xx Bit Rate=1 Mb/s Tx-Power=20 dBm RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=70/70 Signal level=-5 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:1 Missed beacon:0 eth1 no wireless extensions. wlan0 IEEE 802.11bgn Mode:Master Tx-Power=18 dBm RTS thr:off Fragment thr:off Power Management:on eth0 no wireless extensions. br-lan no wireless extensions. And finally, one last question: to get ICS working properly, do I share wlan1 to wlan0 or wlan1 to br-lan (assuming I eventually manage to get a working connection on wlan1)?

I downgraded to 2.8.1 after having trouble with the Wifi-Manager, and after still not being able to get USB wifi internet on that version I went back to 3.0.0 to try my luck again. Now the Pineapple Bar does not work with most infusions I've tried. When doing the pineapple bar update, it seems to download the infusion (though possibly it is going too fast and not retrieving it at all), then go to the md5 page, and finally redirects me back to the home page, without installing anything. Same thing with wifi-manager, sslstrip, status. For some reason networktools does seem to install successfully. Thanks in advance

Is this normal behavior? 00:13:19 Pineapple user.notice root: Mobile.Keepalive: Still Redialing... 00:13:19 Pineapple user.notice root: Mobile.Keepalive: Still Redialing... 00:13:09 Pineapple user.notice root: Mobile.Keepalive: Still Redialing... 00:13:09 Pineapple user.notice root: Mobile.Keepalive: Still Redialing... 00:13:07 Pineapple user.notice usb-modeswitch: 1-1:1.0: Manufacturer=ATHEROS Product=UB91C Serial=12345 00:13:07 Pineapple user.notice root: Mobile.Keepalive: Preventing Duplicate Self. 00:13:07 Pineapple kern.info kernel: [ 787.850000] ieee80211 phy39: Atheros AR9271 Rev:1 00:13:07 Pineapple kern.info kernel: [ 787.820000] ath9k_htc 1-1:1.0: ath9k_htc: FW Version: 1.3 00:13:07 Pineapple kern.info kernel: [ 787.590000] ath9k_htc 1-1:1.0: ath9k_htc: HTC initialized with 33 credits 00:13:07 Pineapple kern.info kernel: [ 787.360000] usb 1-1: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272 00:13:07 Pineapple kern.info kernel: [ 787.280000] usbserial: USB Serial Driver core 00:13:07 Pineapple kern.info kernel: [ 787.270000] usbcore: registered new interface driver usbserial_generic 00:13:07 Pineapple kern.info kernel: [ 787.260000] usbcore: registered new interface driver usbserial 00:13:07 Pineapple kern.info kernel: [ 787.260000] USB Serial support registered for generic 00:13:07 Pineapple kern.info kernel: [ 787.230000] usbcore: deregistering interface driver usbserial 00:13:07 Pineapple kern.info kernel: [ 787.220000] usbcore: deregistering interface driver usbserial_generic 00:13:07 Pineapple kern.info kernel: [ 787.220000] USB Serial deregistering driver generic 00:13:07 Pineapple kern.debug kernel: [ 787.850000] Registered led device: ath9k_htc-phy39 00:13:07 Pineapple kern.debug kernel: [ 787.820000] ath: doing EEPROM country->regdmn map search 00:13:07 Pineapple kern.debug kernel: [ 787.820000] ath: country maps to regdmn code: 0x37 00:13:07 Pineapple kern.debug kernel: [ 787.820000] ath: Regpair used: 0x37 00:13:07 Pineapple kern.debug kernel: [ 787.820000] ath: EEPROM regdomain: 0x833a 00:13:07 Pineapple kern.debug kernel: [ 787.820000] ath: EEPROM indicates we should expect a country code 00:13:07 Pineapple kern.debug kernel: [ 787.820000] ath: Country alpha2 being used: GB 00:13:06 Pineapple kern.info kernel: [ 786.930000] usb 1-1: ath9k_htc: Firmware htc_9271.fw requested 00:13:01 Pineapple kern.info kernel: [ 781.750000] usb 1-1: new high-speed USB device number 40 using ehci-platform 00:13:01 Pineapple kern.info kernel: [ 781.470000] usb 1-1: ath9k_htc: USB layer deinitialized 00:13:01 Pineapple kern.info kernel: [ 781.130000] usb 1-1: USB disconnect, device number 39 00:13:01 Pineapple kern.err kernel: [ 781.450000] ath: phy38: RX failed to go idle in 10 ms RXSM=0x1 00:13:01 Pineapple kern.err kernel: [ 781.350000] ath: phy38: RX failed to go idle in 10 ms RXSM=0x1 00:13:01 Pineapple kern.err kernel: [ 781.230000] ath: phy38: RX failed to go idle in 10 ms RXSM=0x81892aa0 00:12:59 Pineapple user.notice root: Mobile.Keepalive: Still Redialing... 00:12:59 Pineapple user.notice root: Mobile.Keepalive: Still Redialing... 00:12:49 Pineapple user.notice root: Mobile.Keepalive: Still Redialing... 00:12:49 Pineapple user.notice root: Mobile.Keepalive: Still Redialing... 00:12:39 Pineapple user.notice root: Mobile.Keepalive: Still Redialing... 00:12:39 Pineapple user.notice root: Mobile.Keepalive: Still Redialing...

I cannot manage to get the pineapple to have internet through the second wifi, wlan1. After clicking commit on wifi-manager, wlan1 disables and when I re-enable it there is still no internet. It works fine with ethernet though. My wifi-manager radio1 settings (Mark IV using 3.0.0): Network - LAN (also tried WAN) Mode - Client Channel - Auto Broadcast - Disable (also tried Enable) My wifi adapter is the AWUS036NHA. Also I was wondering if it is possible to enable HTTPS on the web interface.