Davepheadrus

Hi All, A while ago I got stuck trying to share the wifi with the pineapple and I found a script to help set it up, now I have that sorted but when I turn the pineapple off it looses the setting or something and I have to run the script in putty everytime which is time consuming and inconvienient, is there anyway to make it boot up and share a wifi (wpa encrypted) by default? also if anyone knows roughly how much it will cost to run it most of the time it would be good to know.. Thanks in advance for any help! Dave

Having issues getting SSL strip to work with facebook, I've tried testing with win7 chrome and ipad Safari and dont seem to get consistent results. Will occasionally strip the SSL but 9/10 times it doesn't do anything. Works pretty well on gmail though maybe 9/10 goes. Anyone found a way to improve the effectiveness? Do they use a different port to put secure traffic down or something? Cheers, Dave

Hi guys, Im certain there must be a way to autostart karma on boot of the pineapple but i spent a couple hours trying to find it with no luck, so if someone could just point (the most likely obvious) way to do this ill be greatful. Otherwise I can ssh into it from andriod but whats the command in ssh to start karma? Or if someone has managed to get onto the gui from android then details on that would sort my issue out too! Thanks and sorry if this has been asked but I really cant find it! Dave

Hmm ive made a DIY 8 AA battery pack, reckon I would be pushing the power limitations with that? I've got 8 x 3800 mAh 1.2v battery's if that's any help And yeh that's what I meant, I thought sslstrip would run without USB, silly me, can dns spoofing to a HTML file stored on the internal be done?

Got it working now after last nights help in the other topic. It was the wire and I need to plug in after boot, I'm using the connection to host a seperate AP. The wifi card comes up as wlan0 if it's plugged in on boot, I also have to manually enable it with the up command every time.. It's fine though just happy it's working now, although massive limitations without the use of the USB port, how can I sniff/ssl strip without laptop present? Dave

Ps I tested on an iPad & win7 with chrome (more extensively on iPad)

I can confirm it works 100% with gmail, hotmail and m.facebook.com and not only of first time browsing to a site. But for the life of me I can't get it to work with Facebook.com even though it has once or twice worked at complete random. Is there a way to run SSLstrip without a USB in the pineapple?

Can confirm its all sorted and running! Now to try and overcome the next issue!! :) Learning more than one thing every day though

okay thanks, need to recharge up and try again! but the iwconfig shows up as wlan31? wtf? but yeah ill sort that in a few mins as im sharing the foreign power adapter between my test victim & pineapple.. Cheers for the help man seems an awesome little script!

Wow. It was the wire! Mad that, had some crazy gold plated good quality one from my astro a40's lying around and using that has got it working (to some extent) now I have another error LOL root@Pineapple:~# Connecting to TALKTALK-52F438 on channel 11 signal quality 100 % -ash: Connecting: not found root@Pineapple:~# Requesting IP Address -ash: Requesting: not found root@Pineapple:~# udhcpc: SIOCGIFINDEX: No such device -ash: udhcpc:: not found root@Pineapple:~# Done. Im guessing this has failed? given the no device/not found things? do i need to install something to use udhcpc? One step forward atleast! :)

root@Pineapple:~# ifconfig wlan1 down root@Pineapple:~# ifconfig wlan1 up root@Pineapple:~# iwlist wlan1 scan wlan1 Failed to read scan data : No such device root@Pineapple:~# dmesg | grep -i wlan1 Will look for another cable but dont think I have one tbh It works fine in reaver from laptop.. Also I googled about the country thing and changed the region to GB and the tx power is at 20 now, made no diff with the results though.

wlan1 Failed to read scan data : No such device thats what i get for "wlist wlan1 scan" if i do ifconfig wlan1 up before it. if i do it without ifconfig wlan1 up then it says: wlan1 Interface doesn't support scanning : Network is down @thesugarat Im running the newest (2.8.1? idk) but I flashed only a few days ago onto whatever was the newest.. & it is the alfa, I only get 27 dBm when i plug the alfa in after reboot and then do 'ifconfig wlan1 up' otherwise it just says 0. and after any task at all it goes back to 0. what do you mean about other country's? I live in the UK if that has anything to do with anything.. Cheers, Dave

Hmmm I did mess with that file a while ago trying to get this set up but Ive ran a factory reset since, also when i look the alterations i made are gone. What else could I try or would I need to re-flash?

Nope wont work in there either, I've realized its something to do with my alfa card. basically when i wlan1 up the card comes on iwconfig shows a dbi reading.. but as soon as I do ANYTHING with the card it says device is unavailible. after trying something i run iwconfig again and it says 0dbi ?? Im using the awus036h, read somewhere you have the same card? any ideas?

Thanks got it to a further point now but still getting errors in the script, Ran iwconfig and it says the wifi is up then I run the script and it says the wifi is unavailable? Then if i run iwconfig again after running the script it says the wifi is now down :s any ideas? here is the output: root@Pineapple:/pineapple/scripts/wificonnect# iwconfig lo no wireless extensions. wlan1 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=27 dBm RTS thr:off Fragment thr:off Encryption key:off Power Management:off eth1 no wireless extensions. wlan0 IEEE 802.11bgn Mode:Master Tx-Power=18 dBm RTS thr:off Fragment thr:off Power Management:on eth0 no wireless extensions. br-lan no wireless extensions. root@Pineapple:/pineapple/scripts/wificonnect# ./connect.sh -i wlan1 Stopping karma Starting on wlan1 Scanning for wifi Scan not completed. Retrying. 1 of 3 Scan not completed. Retrying. 2 of 3 Scan not completed. Retrying. 3 of 3 Cannot scan for wifi. Interface down or unavailable. Done. Edit: Same error when I remembered to specify the -s and -p functions