Jump to content

Semtx

Active Members
  • Posts

    11
  • Joined

  • Last visited

Recent Profile Visitors

589 profile views

Semtx's Achievements

Newbie

Newbie (1/14)

  1. The Awus036H already works on 2.8.0, its the NHA (and others?) that s problematic.
  2. Thanks, i've found several tutorial about wep and wpa, but not the simple task of just getting everything on an open network. I didnt know you could lock down the channel already at the airmon command, i did it with the --channel parameter for airodump. Regarding wep and wpa, im pretty sure you can decrypt both using wireshark: http://wiki.wireshark.org/HowToDecrypt802.11 Its interesting with N i didnt know it used other frequencies. Btw is the Pinapple internal chipset N by spec? You would think that the NHA which is spec'ed N in theory should be able to capture N data.
  3. Im interested in this too, i cant seem to find any place on the internet with a proper description on how to do it. As i see it there are two ways of doing it. The first one is just to use airodump to dump packages or the specified channel and/or bssid. I've used this and it works okay. I think i miss alot of packages this way, but i also get some usefull output. The other method is assosiating the wlan first as you do it. Maybe with some other commands, but I haven't even tied that direction yet. Does anyone know what the best and most robust way of doing it?
  4. Looking foward to it. Is there any bug database where i can submit and track bugs? I had a lot of cool ideas with the Pineapple, but there is so many often small bugs that get in the way of getting something run fully. Now im just waiting for the firmware update and crossing finger that some of the bugs stopping me are gone.
  5. What adapter did you use? I had problems using the hak shop adapter, and my H adapter worked. I skipped the manager infusion as i couldn't get that working and I did it manually. (I think the interface o the manager is a bit unintuitive.) You can try that too and use wpa_supplicant with the -dd (and no -B) option, to debug the connection. Have you put your AP info in wpa_supplicant.conf?
  6. Thanks for the tip. Though reboots also occurs with this hardware attached and used: AWUS036NHA, AWUS036H, Android phone in tethering, USB 3G Dongle (not fully working yet, as stated in other tread) I'm pretty sure it's load related somehow and could be a combination with the power usage. Am i one of the few, do i have a faulty device?
  7. I'm pretty sure there is still another issue here. My cables are new with no visible flaws, and it reboots constantly, when i do something else than just booting it up. I haven't tried all possible configurations with different services, usb unplugged/plugged with various devices and power options (but many), and something is either bugged or exhausted (or both) within half an hour. It's there any way to debug across boots, so you can get the logfile date before the device was reset? Is there a way to debug power consumption of the device?
  8. Does anyone know if a way to debug/listen in on what AT commands the dongle sends when I'm using it from my Mac/Win machine? Emulating this might help. Also is there any USB device viewer/command-line tool i can use to find out what USB device to use, preferably on the device. Thanks.
  9. I did it all as instructed but no luck for but my internal and the NHA. I got the internal wlan boosted from 18dBm to 20dBm which is great, but i had expected more. The AWUS036NHA which i bought through the HakShop didn't change from 20dBm. (It worked for my old trusty AWUS036H) The AWUS036NHA is advertised as a 28dBm device. Edit: I think my main challenge is that regulatory domain is set to GB where i do not even live. Jan 1 00:00:40 Pineapple kern.debug kernel: [ 35.480000] ath: EEPROM regdomain: 0x833a Jan 1 00:00:40 Pineapple kern.debug kernel: [ 35.480000] ath: EEPROM indicates we should expect a country code Jan 1 00:00:40 Pineapple kern.debug kernel: [ 35.480000] ath: doing EEPROM country->regdmn map search Jan 1 00:00:40 Pineapple kern.debug kernel: [ 35.480000] ath: country maps to regdmn code: 0x37 Jan 1 00:00:40 Pineapple kern.debug kernel: [ 35.480000] ath: Country alpha2 being used: GB Jan 1 00:00:40 Pineapple kern.debug kernel: [ 35.480000] ath: Regpair used: 0x37 Is there a way to change this bootup default value?
  10. Thanks for looking at this. I've tried both with a 5V/2A and the 12V/0.5A which comes with the device. (When I've gotten this up and running, I hope to run it via the Pineapple Juice battery)
  11. Hi All, I've worked a lot on this, and have come so far that that the dongle connects. But it only lasts briefly, because it disconnects just after connect. I've tried everything, and I hope someone here can verify my configuration. This is the interesting part of /pineapple/3g/3g.sh: *19d2:0167*|*19d2:0167*) echo "ZTE MF820D (Telia) detected. Attempting mode switch" uci delete network.wan2 uci set network.wan2=interface uci set network.wan2.ifname=ppp0 uci set network.wan2.proto=3g uci set network.wan2.service=umts uci set network.wan2.device=/dev/ttyUSB2 uci set network.wan2.apn=www.internet.mtelia.dk uci set network.wan2.username= uci set network.wan2.password= uci set network.wan2.defaultroute=1 uci commit network echo "Usb modeswitch" usb_modeswitch -v 19d2 -p 0166 -V 19d2 -P 0167 -M 55534243123456782400000080000685000000240000000000000000000000 -m 0x01 -n 0 -s 20 echo "Removing usbserial mod" sleep 10; rmmod usbserial echo "Inseting usbserial mod" sleep 3; insmod usbserial vendor=0x19d2 product=0x0167 # sleep 5; /etc/init.d/firewall disable; /etc/init.d/firewall stop # logger "3G: firewall stopped" echo "Setting up iptables" iptables -t nat -A POSTROUTING -s 172.16.42.0/24 -o 3g-wan2 -j MASQUERADE iptables -A FORWARD -s 172.16.42.0/24 -o 3g-wan2 -j ACCEPT iptables -A FORWARD -d 172.16.42.0/24 -m state --state ESTABLISHED,RELATED -i 3g-wan2 -j ACCEPT ;; I've removed the firewall part as it fails anyways. This is /etc/chatscripts/3g.chat: ABORT BUSY ABORT 'NO CARRIER' ABORT ERROR REPORT CONNECT TIMEOUT 10 "" "AT&F" OK "ATE1" OK 'AT+CGDCONT=1,"IP","$USE_APN"' ABORT 'NO CARRIER' OK "AT+ZSNT=0,0,0" SAY "Calling UMTS/GPRS" TIMEOUT 20 OK "ATD*99#" CONNECT ' ' And lastly here is the interesting part of /etc/config/network: config interface 'wan2' option ifname 'ppp0' option proto '3g' option service 'umts' option device '/dev/ttyUSB2' option apn 'www.internet.mtelia.dk' option defaultroute '1' Probably as part of the new pineapple firmware, the dongle does a modechange, which took me a while to see. So this happens automaticly at bootup: Jan 1 00:00:41 Pineapple user.notice usb-modeswitch: 1-0:1.0: Manufacturer=Linux_3.7.9_ehci_hcd Product=Generic_Platform_EHCI_Controller Serial=ehci-platform Jan 1 00:00:41 Pineapple user.notice usb-modeswitch: 1-1:1.0: Manufacturer=ZTE,Incorporated Product=ZTE_LTE_Technologies_MSM Serial=? Jan 1 00:00:42 Pineapple user.notice usb-modeswitch: 1-1:1.1: Manufacturer=ZTE,Incorporated Product=ZTE_LTE_Technologies_MSM Serial=? Jan 1 00:00:42 Pineapple user.notice usb-modeswitch: 1-1:1.2: Manufacturer=ZTE,Incorporated Product=ZTE_LTE_Technologies_MSM Serial=? Jan 1 00:00:42 Pineapple user.notice usb-modeswitch: 1-1:1.3: Manufacturer=ZTE,Incorporated Product=ZTE_LTE_Technologies_MSM Serial=? Jan 1 00:00:42 Pineapple user.notice usb-modeswitch: 1-1:1.4: Manufacturer=ZTE,Incorporated Product=ZTE_LTE_Technologies_MSM Serial=? And the lsusb -v looks like this: Bus 001 Device 003: ID 19d2:0167 ZTE WCDMA Technologies MSM Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x19d2 ZTE WCDMA Technologies MSM idProduct 0x0167 bcdDevice 0.00 iManufacturer 3 ZTE,Incorporated iProduct 2 ZTE LTE Technologies MSM iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 138 bNumInterfaces 5 bConfigurationValue 1 iConfiguration 1 ZTE Configuration bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Here is how the log looks just after i run my 3g.sh script: Jan 1 00:06:01 Pineapple user.notice root: 3G: Connection Script here, searching for modems Jan 1 00:06:13 Pineapple kern.info kernel: [ 373.150000] usbserial: USB Serial deregistering driver generic Jan 1 00:06:13 Pineapple kern.info kernel: [ 373.160000] usbcore: deregistering interface driver usbserial_generic Jan 1 00:06:13 Pineapple kern.info kernel: [ 373.160000] usbcore: deregistering interface driver usbserial Jan 1 00:06:16 Pineapple kern.info kernel: [ 376.210000] usbcore: registered new interface driver usbserial Jan 1 00:06:16 Pineapple kern.info kernel: [ 376.210000] usbcore: registered new interface driver usbserial_generic Jan 1 00:06:16 Pineapple kern.info kernel: [ 376.220000] usbserial: USB Serial support registered for generic Jan 1 00:06:16 Pineapple kern.info kernel: [ 376.220000] usbserial_generic 1-1:1.0: The "generic" usb-serial driver is only for testing and one-off prototypes. Jan 1 00:06:16 Pineapple kern.info kernel: [ 376.230000] usbserial_generic 1-1:1.0: Tell linux-usb@vger.kernel.org to add your device to a proper driver. Jan 1 00:06:16 Pineapple kern.info kernel: [ 376.240000] usbserial_generic 1-1:1.0: generic converter detected Jan 1 00:06:16 Pineapple kern.info kernel: [ 376.250000] usb 1-1: generic converter now attached to ttyUSB0 Jan 1 00:06:16 Pineapple kern.info kernel: [ 376.260000] usbserial_generic 1-1:1.1: The "generic" usb-serial driver is only for testing and one-off prototypes. Jan 1 00:06:16 Pineapple kern.info kernel: [ 376.270000] usbserial_generic 1-1:1.1: Tell linux-usb@vger.kernel.org to add your device to a proper driver. Jan 1 00:06:16 Pineapple kern.info kernel: [ 376.280000] usbserial_generic 1-1:1.1: generic converter detected Jan 1 00:06:16 Pineapple kern.info kernel: [ 376.280000] usb 1-1: generic converter now attached to ttyUSB1 Jan 1 00:06:19 Pineapple daemon.notice pppd[1855]: pppd 2.4.5 started by root, uid 0 Jan 1 00:06:20 Pineapple local2.info chat[1859]: abort on (BUSY) Jan 1 00:06:20 Pineapple local2.info chat[1859]: abort on (NO CARRIER) Jan 1 00:06:20 Pineapple local2.info chat[1859]: abort on (ERROR) Jan 1 00:06:20 Pineapple local2.info chat[1859]: report (CONNECT) Jan 1 00:06:20 Pineapple local2.info chat[1859]: timeout set to 10 seconds Jan 1 00:06:20 Pineapple local2.info chat[1859]: send (AT&F^M) Jan 1 00:06:20 Pineapple local2.info chat[1859]: expect (OK) Jan 1 00:06:20 Pineapple local2.info chat[1859]: AT&F^M^M Jan 1 00:06:20 Pineapple local2.info chat[1859]: OK Jan 1 00:06:20 Pineapple local2.info chat[1859]: -- got it Jan 1 00:06:20 Pineapple local2.info chat[1859]: send (ATE1^M) Jan 1 00:06:20 Pineapple local2.info chat[1859]: expect (OK) Jan 1 00:06:20 Pineapple local2.info chat[1859]: ^M Jan 1 00:06:20 Pineapple local2.info chat[1859]: ATE1^M^M Jan 1 00:06:20 Pineapple local2.info chat[1859]: OK Jan 1 00:06:20 Pineapple local2.info chat[1859]: -- got it Jan 1 00:06:20 Pineapple local2.info chat[1859]: send (AT+CGDCONT=1,"IP","www.internet.mtelia.dk"^M) Jan 1 00:06:21 Pineapple local2.info chat[1859]: abort on (NO CARRIER) Jan 1 00:06:21 Pineapple local2.info chat[1859]: expect (OK) Jan 1 00:06:21 Pineapple local2.info chat[1859]: ^M Jan 1 00:06:21 Pineapple local2.info chat[1859]: AT+CGDCONT=1,"IP","www.internet.mtelia.dk"^M^M Jan 1 00:06:21 Pineapple local2.info chat[1859]: OK Jan 1 00:06:21 Pineapple local2.info chat[1859]: -- got it Jan 1 00:06:21 Pineapple local2.info chat[1859]: send (AT+ZSNT=0,0,0^M) Jan 1 00:06:21 Pineapple local2.info chat[1859]: timeout set to 20 seconds Jan 1 00:06:21 Pineapple local2.info chat[1859]: expect (OK) Jan 1 00:06:21 Pineapple local2.info chat[1859]: ^M Jan 1 00:06:21 Pineapple local2.info chat[1859]: AT+ZSNT=0,0,0^M^M Jan 1 00:06:21 Pineapple local2.info chat[1859]: OK Jan 1 00:06:21 Pineapple local2.info chat[1859]: -- got it Jan 1 00:06:21 Pineapple local2.info chat[1859]: send (ATD*99#^M) Jan 1 00:06:21 Pineapple local2.info chat[1859]: expect (CONNECT) Jan 1 00:06:21 Pineapple local2.info chat[1859]: ^M Jan 1 00:06:21 Pineapple local2.info chat[1859]: ATD*99#^M^M Jan 1 00:06:21 Pineapple local2.info chat[1859]: CONNECT Jan 1 00:06:21 Pineapple local2.info chat[1859]: -- got it Jan 1 00:06:21 Pineapple local2.info chat[1859]: send ( ^M) Jan 1 00:06:21 Pineapple daemon.info pppd[1855]: Serial connection established. Jan 1 00:06:21 Pineapple daemon.info pppd[1855]: Using interface 3g-wan2 Jan 1 00:06:21 Pineapple daemon.notice pppd[1855]: Connect: 3g-wan2 <--> /dev/ttyUSB2 Jan 1 00:06:22 Pineapple daemon.warn pppd[1855]: Could not determine remote IP address: defaulting to 10.64.64.64 Jan 1 00:06:22 Pineapple daemon.notice pppd[1855]: local IP address 10.234.118.8 Jan 1 00:06:22 Pineapple daemon.notice pppd[1855]: remote IP address 10.64.64.64 Jan 1 00:06:22 Pineapple daemon.notice pppd[1855]: primary DNS address 62.44.166.197 Jan 1 00:06:22 Pineapple daemon.notice pppd[1855]: secondary DNS address 62.44.166.69 Jan 1 00:06:22 Pineapple daemon.notice netifd: Interface 'wan2' is now up Jan 1 00:06:24 Pineapple daemon.info dnsmasq[1534]: reading /tmp/resolv.conf.auto Jan 1 00:06:24 Pineapple daemon.info dnsmasq[1534]: using nameserver 62.44.166.197#53 Jan 1 00:06:24 Pineapple daemon.info dnsmasq[1534]: using nameserver 62.44.166.69#53 Jan 1 00:06:24 Pineapple daemon.info dnsmasq[1534]: using nameserver 8.8.8.8#53 Jan 1 00:06:24 Pineapple daemon.info dnsmasq[1534]: using local addresses only for domain lan Jan 1 00:06:25 Pineapple kern.info kernel: [ 384.950000] usb 1-1: USB disconnect, device number 3 Jan 1 00:06:25 Pineapple daemon.notice pppd[1855]: Modem hangup Jan 1 00:06:25 Pineapple daemon.info pppd[1855]: Connect time 0.1 minutes. Jan 1 00:06:25 Pineapple daemon.info pppd[1855]: Sent 204 bytes, received 0 bytes. Jan 1 00:06:25 Pineapple daemon.notice pppd[1855]: Connection terminated. Jan 1 00:06:25 Pineapple daemon.notice netifd: Interface 'wan2' has lost the connection Jan 1 00:06:25 Pineapple kern.info kernel: [ 384.960000] generic ttyUSB0: generic converter now disconnected from ttyUSB0 Jan 1 00:06:25 Pineapple kern.info kernel: [ 384.960000] usbserial_generic 1-1:1.0: device disconnected Jan 1 00:06:25 Pineapple kern.info kernel: [ 384.970000] generic ttyUSB1: generic converter now disconnected from ttyUSB1 Jan 1 00:06:25 Pineapple kern.info kernel: [ 384.980000] usbserial_generic 1-1:1.1: device disconnected Jan 1 00:06:25 Pineapple kern.info kernel: [ 384.980000] generic ttyUSB2: generic converter now disconnected from ttyUSB2 Jan 1 00:06:25 Pineapple kern.info kernel: [ 384.990000] usbserial_generic 1-1:1.2: device disconnected Jan 1 00:06:25 Pineapple kern.info kernel: [ 384.990000] generic ttyUSB3: generic converter now disconnected from ttyUSB3 Jan 1 00:06:25 Pineapple kern.info kernel: [ 385.000000] usbserial_generic 1-1:1.3: device disconnected Jan 1 00:06:25 Pineapple kern.info kernel: [ 385.010000] generic ttyUSB4: generic converter now disconnected from ttyUSB4 Jan 1 00:06:25 Pineapple kern.info kernel: [ 385.010000] usbserial_generic 1-1:1.4: device disconnected Jan 1 00:06:25 Pineapple kern.info kernel: [ 385.300000] usb 1-1: new high-speed USB device number 4 using ehci-platform Jan 1 00:06:25 Pineapple kern.info kernel: [ 385.450000] usbserial_generic 1-1:1.0: The "generic" usb-serial driver is only for testing and one-off prototypes. Jan 1 00:06:25 Pineapple kern.info kernel: [ 385.460000] usbserial_generic 1-1:1.0: Tell linux-usb@vger.kernel.org to add your device to a proper driver. Jan 1 00:06:25 Pineapple kern.info kernel: [ 385.470000] usbserial_generic 1-1:1.0: generic converter detected Jan 1 00:06:25 Pineapple kern.info kernel: [ 385.480000] usb 1-1: generic converter now attached to ttyUSB0 Jan 1 00:06:25 Pineapple kern.info kernel: [ 385.480000] usbserial_generic 1-1:1.1: The "generic" usb-serial driver is only for testing and one-off prototypes. Jan 1 00:06:25 Pineapple kern.info kernel: [ 385.490000] usbserial_generic 1-1:1.1: Tell linux-usb@vger.kernel.org to add your device to a proper driver. Jan 1 00:06:25 Pineapple kern.info kernel: [ 385.500000] usbserial_generic 1-1:1.1: generic converter detected Jan 1 00:06:25 Pineapple kern.info kernel: [ 385.510000] usb 1-1: generic converter now attached to ttyUSB1 Jan 1 00:06:25 Pineapple kern.info kernel: [ 385.510000] usbserial_generic 1-1:1.2: The "generic" usb-serial driver is only for testing and one-off prototypes. Jan 1 00:06:25 Pineapple kern.info kernel: [ 385.520000] usbserial_generic 1-1:1.2: Tell linux-usb@vger.kernel.org to add your device to a proper driver. Jan 1 00:06:25 Pineapple kern.info kernel: [ 385.530000] usbserial_generic 1-1:1.2: generic converter detected Jan 1 00:06:25 Pineapple kern.info kernel: [ 385.540000] usb 1-1: generic converter now attached to ttyUSB2 Jan 1 00:06:25 Pineapple kern.info kernel: [ 385.550000] usbserial_generic 1-1:1.3: The "generic" usb-serial driver is only for testing and one-off prototypes. Jan 1 00:06:25 Pineapple kern.info kernel: [ 385.560000] usbserial_generic 1-1:1.3: Tell linux-usb@vger.kernel.org to add your device to a proper driver. Jan 1 00:06:25 Pineapple kern.info kernel: [ 385.570000] usbserial_generic 1-1:1.3: generic converter detected Jan 1 00:06:25 Pineapple kern.info kernel: [ 385.570000] usb 1-1: generic converter now attached to ttyUSB3 Jan 1 00:06:25 Pineapple kern.info kernel: [ 385.580000] usbserial_generic 1-1:1.4: The "generic" usb-serial driver is only for testing and one-off prototypes. Jan 1 00:06:25 Pineapple kern.info kernel: [ 385.590000] usbserial_generic 1-1:1.4: Tell linux-usb@vger.kernel.org to add your device to a proper driver. Jan 1 00:06:25 Pineapple kern.info kernel: [ 385.600000] usbserial_generic 1-1:1.4: generic converter detected Jan 1 00:06:25 Pineapple kern.info kernel: [ 385.600000] usb 1-1: generic converter now attached to ttyUSB4 Jan 1 00:06:26 Pineapple daemon.info pppd[1855]: Terminating on signal 15 Jan 1 00:06:26 Pineapple daemon.info pppd[1855]: Exit. Jan 1 00:06:26 Pineapple daemon.notice netifd: Interface 'wan2' is now down Jan 1 00:06:27 Pineapple user.notice usb-modeswitch: 1-1:1.0: Manufacturer=ZTE,Incorporated Product=ZTE_LTE_Technologies_MSM Serial=? Jan 1 00:06:27 Pineapple user.notice usb-modeswitch: 1-1:1.1: Manufacturer=ZTE,Incorporated Product=ZTE_LTE_Technologies_MSM Serial=? Jan 1 00:06:27 Pineapple user.notice usb-modeswitch: 1-1:1.2: Manufacturer=ZTE,Incorporated Product=ZTE_LTE_Technologies_MSM Serial=? Jan 1 00:06:28 Pineapple user.notice usb-modeswitch: 1-1:1.3: Manufacturer=ZTE,Incorporated Product=ZTE_LTE_Technologies_MSM Serial=? Jan 1 00:06:28 Pineapple user.notice usb-modeswitch: 1-1:1.4: Manufacturer=ZTE,Incorporated Product=ZTE_LTE_Technologies_MSM Serial=? So for me it looks like the modem resets after disconnect (and then gets switched back again). But i have no idea what actually happened. I've tested the modem on a Mac and PC and i works fine. I'm not hundred percent sure that its /dev/ttyUSB2 I'm supposed to use, but i've tried the other ones and ttyUSB2 seems to give the least critical errors. Is there anything i've overlooked? Thanks a bunch.
×
×
  • Create New...