KingHackR

I hack for freedom for everyone, I have a code of ethics that I never steal and I respect peoples privacy. But if you are evil and want to do destruction look out. I do not care which side you say you are on. I work hard to make sure the truth comes out. Even if I have to sit in a man-hole and tap in to reveal it. Our freedom is sacred a lot of people died to give it to us and too many are willing to give it away, and too many are willing to take it away.

I agree, that is why I said to keep it positive from now on. But I will never leave a negative unanswered.

You and your buddy Mr. Protocol were useless. Your partner Mr. Protocol was even too scared to let me speak freely, so he shut down and locked me out of adding to the other forum topic to hide the truth about Hak5 and its lack of response, and I am a Dick? Enough Negative! now lets look to the positive from here on.

Yes with a lot of effort, I was able finally to contact people who care. Sara and Shannon. I give them 10 stars ********** and five smiles :-) :-) :-) :-) :-).

See how a few minutes with some one who cares solves problems.

Dear Shannon, Yes! I checked all areas and both E-mails both Earthlink and Hotmail that I used to send out. I thought that my first Emails from Earthlink might have been blocked by the system it happened to me once before someone blocked all Earthlink emails so mine had not gotten through. So I checked everything and I could not find any emails that came to me from Sara or Hak5. Thank you so much for helping me with this situation. I do not trust UPS and I will tell you why. My son bought a Large screen TV and UPS said it was delivered but it was not, then after they started checking the driver had told then that he had left it with the people across the street and would retrieve it and get it to me. I caught the UPS truck coming down the street and stopping in front of the peoples house across the street so I ran right up to the truck and found out it was not with my neighbor across the street it had never left his truck. He went in back of his truck and got it for me. If I had not been fast in going after the missing TV, he I am sure was going to keep it for himself. Your emails seem to be reaching me fine. Yes I did just receive an email with a new tracking number that just came in around the time yours did. I hope this one makes it all the way to me my fingers are crossed J May God be with you and thank you, thank you for all your help. I could not have done it without your help. John AT&T Electronic Eng. From: Sara - I have your order on the way to you, The HakShop Team: Run by the Hak5 team, HakShop is dedicated to serving the Information Security community. Hi John, I think I figured out the issue. Please see the below text from Sara. Thanks! On Sep 19, 2016 11:03 AM, "Shannon Morse" wrote: Hi John, I read your forum post. Are you sure you didn't receive an email two days ago? Because I see that it is dated September 17. See the attached screenshot. Whatever the case, the shop is aware of your problem and you've been contacted (maybe it ended up in spam?). If you did indeed find a personal home phone number on the internet, please note that we take our personal privacy seriously. A call to one of our personal numbers will result in lots of time and money spent researching this issue. I've had a stalker in the past who started calling me and showing up. On Sep 19, 2016 9:05 AM, Sara ******It looks like this email to John was only sent to me and cc Sara Remmy. Did you send it to John too or just us?****** Date: Sep 17, 2016 11:27 AM Hi John, I apologize, I was unable to sit and answer emails yesterday due to the ongoing training event at the Hak5 Warehouse. I understand that your package has been marked as delivered, but was sent to the wrong address. After speaking with UPS, I have been instructed to send you a replacement package. I will send tracking to you on Monday. Let me know if you would like the package shipped to an alternate address. Please do not take my delay in response personally, I am trying my best to help all our customers in a timely manner. We do not offer phone support, due to overwhelming, long, difficult calls. Other than help with packing packages, I run the shop myself. Email is most of the time to the point and brief - much more time effective for large volumes of requests. I can understand the frustration of not receiving your package, I am here to help, and we do care greatly about our customers and the community. Timing is often difficult, and I apologize.

I fixed my issues, I found out that it was running out of space in root when I ssh'ed over to it I just moved all the real files from /usr/bin to /sd/usr/bin and made pointer files for each one I moved and put them in the original files place in /usr/bin. this saved me a lot of room so I could now run more programs and not have to worry as much. I will move the /usr/sbin files over too. its a lot of work that would not have to be done if they just gave more room to begin with. only needed to use only two commands cp -a and ln -s. everything is working great now. :-), I now can put the two pineapples to work. (I know why they called them pineapples now Ha Ha and a lot of Lulz)

PortaI Auth is installed it and it works fine. I do not think it is any one infusion I just think the pineapple just can't handle the load even when you have loaded everything to the SD. It may be a memory problem or just a slow processor.

I think it is just that the pineapple can not handle the load it just slows down after to many infusions even if I am not using them. I just received a new pineapple and it does the same thing. do you know anyone who got all the infusions installed and is not having the same trouble? Do they not know that this is happening? Also on a side note the new pineapple they sent me did not work when booted it came up and had me set my password and then it came to the start page and all I had was blank squares. I could not click on anything execpt the logoff gui. I had to reinstall the operating system myself to get it to work so I would be able to bring it up to the latest version.

I powered it by both the power supply and usb to power input. It does not do it now, because I have not put all the software back on it I am just not sure which infusion was doing it or if it was that it can not handle having all the infusions installed. I am just putting the ones I need on for now and just adding as I need.

I have tried to install all the infusions and every time I do I end up with a constant reboot problem with the mark V. I do not know if it is the Mark V that can not handle having all the infusions loaded or if it is one of the infusions causing the problem. The first time this happened I ended up bricking the unit. I unbricked it and reloaded all the software infusions and the same problem happened. I have been loading all the infusions on a 8GB SD chip. now I have reloaded the software a third time but have not loaded every infusions only the ones I needed and it seems to be stable for now but what is going on is anyone having this trouble. Another problem is the Strip-N-Inject seems not to load correctly and after I have installed the infusion it still says to install in the infusion box. so I hit the install to sd and it insalls but when I close the window the box still says not installed, so I enter the box(window) again and the infusion seems installed but the lower window is too high and covers some of the upper window where the commands are. I close the infusion window again and it still says that the infusion is not installed in the little infusion starting window. I removed it for now but does anyone know anything about these two issues? Thanks KingHackR

Thanks For the Reply :-) Just let me know when! :-)

In other words I still get a 404 page., I tried from three different computers and three different operating systems.Win7 winxp Linux

No I did nothing wrong but I found out what the problem was the minitool partition wizard makes the second partition into some strange two part partition all inside itself I suggest that everyone use the Linux (Ubuntu GUI disk partition) tool like what is in your catalog because I was able to see what the disk wizard and how it screwed up the second partition. All is working correctly now. Thanks for trying to help I knew if I hit my head against this enough I would figure it out like a hack. Hee Hee :-)

I have been on this for 6 hours now and getting tired will get back to it in a while. I am like a dog with a bone and will not let this go till I figure it out. This is like hacking it keeps me going in circles.

I am SSH'ed in right now if you want me to try something?

I have put 4 different drives in there and all are doing the same thing but they look good in backtrack 5? And yes I have reformatted each drive at least 3 times each but I have been using the default cluster size could that be it? Who knows

I only have two partitions but pineapple is creating a /dev/sda5 out of the /dev/sda2 and putting a <sda5> around it there are no /dev/sda3 or /dev/sda4 listed like this : [ 15.690000] sda: sda1 sda2 < sda5 > :

The system is seeing my /dev/sda2 as having 0kb so it will not make the swap file there? should I use /dev/sda5 because pineapple says it has 4.6gb? this is not making sense, I do not know why it is not seeing /dev/sda2 as having the 4.6gb, it keeps putting it in /dev/sda5? I ssh over to pinapple and tried everything I could think of, I have to be missing something. Just lost on this one. :-( could it be the format I am using when I use mkswap who knows If I could get an exact example of what I should input it might be helpful but I don't think its that.

From the "ls -al" command I get: : brw-r--r-- 1 root root 8, 0 Jan 1 1970 /dev/sda : : brw-r--r-- 1 root root 8, 1 Jan 1 1970 /dev/sda1 : : brw-r--r-- 1 root root 8, 2 Jan 1 1970 /dev/sda2 : : brw-r--r-- 1 root root 8, 5 Jan 1 1970 /dev/sda5 : Under disk usage I get this: (no mention of /dev/sda2)? : Filesystem Size Used Available Use% Mounted on : : rootfs 960.0K 752.0K 208.0K 78% / : : /dev/root 5.3M 5.3M 0 100% /rom : : tmpfs 14.4M 92.0K 14.3M 1% /tmp : : tmpfs 512.0K 0 512.0K 0% /dev : : /dev/mtdblock3 960.0K 752.0K 208.0K 78% /overlay : : overlayfs:/overlay 960.0K 752.0K 208.0K 78% / : : /dev/sda1 9.4G 14.2M 8.8G 0% /usb : : /dev/sda5 4.6G 11.0M 4.4G 0% /mnt/sda5 :

I am getting this with the "free" command: : total used free shared buffers : : Mem: 29480 26856 2624 0 3952 : ; -/+ buffers: 22904 6576 : : Swap: 0 0 0 :

Will try more later and get back to you A.S.A.P.

I am getting a better response from my PNY Drive: hub 1-0:1.0: 1 port detected [ 11.410000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 11.530000] uhci_hcd: USB Universal Host Controller Interface driver [ 11.650000] Initializing USB Mass Storage driver... [ 11.650000] usbcore: registered new interface driver usb-storage [ 11.660000] USB Mass Storage support registered. [ 11.700000] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 12.280000] scsi0 : usb-storage 1-1:1.0 [ 14.060000] scsi 0:0:0:0: Direct-Access PNY USB 2.0 FD 8192 PQ: 0 ANSI: 0 CCS [ 15.480000] sd 0:0:0:0: [sda] 31326208 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 15.490000] sd 0:0:0:0: [sda] Write Protect is off [ 15.490000] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 15.490000] sd 0:0:0:0: [sda] No Caching mode page present [ 15.500000] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 15.510000] sd 0:0:0:0: [sda] No Caching mode page present [ 15.510000] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 15.520000] sda: sda1 sda2 < sda5 > [ 15.530000] sd 0:0:0:0: [sda] No Caching mode page present [ 15.530000] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 15.540000] sd 0:0:0:0: [sda] Attached SCSI removable disk My USB file looks like this: config global automount option from_fstab 1 option anon_mount 1 config global autoswap option from_fstab 1 option anon_swap 1 config mount option target /usb option device /dev/sda1 option fstype ext4 option options rw,sync option enabled 1 option enabled_fsck 0 config swap option device /dev/sda2 option enabled 1 I am a little lost on this, at this point just can not activate the swap

I did ls /dev/ad* and I got : " /dev/ada " " /dev/sda1 " " /dev/sda2 " " /dev/sda5 "