Subspace3

Fixed it, my bad. Problem was staring me in the face, unable to enumerate USB device on port 3! Dongle was connected to powered usb hub via extension lead. Removed lead, directly connected, sorted. I've never had a USB extension lead that actually worked, they are next to useless.

Awesome, thanks Sebkinne.

Hi all, Yes I know I'm lame, its been such a long time since I've done any kind of scripting, I'm a cisco kid now. Wondering if any one can help me. echo -n Enter BSSID: read name echo $name >> /tmp/blacklist.txt Basically wanting that to run multiple times and then move on when the user is finished entering. I know I could just send the values as arguments when running the script (script.sh arg1 arg2 ect( but this way is much nicer. I'm thinking something like a while loop reading $name and if say "exit" comes up breaking the loop, but not sure on the syntax or if this is the best way as 'exit' would appear in the file also. thanks for any help

Hmmmm, what's wrong with blocking them or how about the radical idea of ignoring them or deleting facebook all together! Seems this is just a story to get help with gaining access into some ones account :-/

Hi all, Wondering if anyone can help, bit of a noob with this. Had a pineapple quite a while and had no problems so far, all working well. Decided to try and get 3g working so bought a mf637 T-mobile branded dongle unlocked. Using a script found on the forums I'm getting no joy at all and have no clue where to start. Lsusb output doesn't show the dongle at all : ------------------------------------------------------------------------------------------------------------------ Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB Bus 001 Device 003: ID 0781:5571 SanDisk Corp. Cruzer Fit ------------------------------------------------------------------------------------------------------------------------- When I unplug and put the dongle back in I see this in the logs: ------------------------------------------------------------------------------------------------------------------------------------- 00:02:52 Pineapple kern.info kernel: [ 172.570000] usb 1-1.3: new high-speed USB device number 4 using ehci-platform 00:02:52 Pineapple kern.err kernel: [ 172.620000] hub 1-1:1.0: unable to enumerate USB device on port 3 -------------------------------------------------------------------------------------------------------------------- Did ls /dev/tty* to see if anything matches as defined in the script (/dev/ttyUSB0) but nothing along those lines is shown. I tested my three 321 uk sim in the dongle on my laptop after filling in the apn and dial number settings and it connected ok, however not allowing me to browse (they new it was in a dongle and therefore not allowed!) guess Ill have to change sim. I'm guessing this wouldn't have anything to do with my problems would it. Thanks for any info (script below) ------------------------------------------------------------------------------------------------------- *19d2:0031*) echo "ZTE MF637 (3UK) detected. Attempting mode switch" uci delete network.wan2 uci set network.wan2=interface uci set network.wan2.ifname=ppp0 uci set network.wan2.proto=3g uci set network.wan2.service=umts uci set network.wan2.device=/dev/ttyUSB0 uci set network.wan2.apn=three.co.uk uci set network.wan2.defaultroute=1 uci commit network sleep 10; rmmod usbserial sleep 5; insmod usbserial vendor=0x19d2 product=0x0031 sleep 5; /etc/init.d/firewall disable; /etc/init.d/firewall stop logger "3G: firewall stopped" iptables -t nat -A POSTROUTING -s 172.16.42.0/24 -o 3g-wan2 -j MASQUERADE iptables -A FORWARD -s 172.16.42.0/24 -o 3g-wan2 -j ACCEPT iptables -A FORWARD -d 172.16.42.0/24 -m state --state ESTABLISHED,RELATED -i 3g-wan2 -j ACCEPT ----------------------------------------------------------------------------------

Ill have a mess around with the delays and let you know how I get on. Ahhh I didn't know that about 2.6, thanks for the info :-)

Hi all, New user to the duck wondering if any of you guys can help me. I've updated the firmware to twin duck to eventually use mimikatz and procdump on my system. 1st of all I tested with my default inject.bin which was a lock screen message found on github. Didn't work when plugging in as before upgrade, but changed the 1st delay to 1000 now it runs fine when plugging in. Testing another script (below), for some reason it just stops when the screen resolution dialog pops up. Nothing else. Just stops dead. Any ideas? Probably something simple, just want to make sure I'm doing everything right. DELAY 1000 CONTROL ESCAPE DELAY 50 STRING Screen Resolution DELAY 50 ENTER DELAY 100 TAB TAB TAB DOWN DOWN TAB TAB TAB TAB TAB TAB ENTER TAB ENTER Currently encoding using duckencoder 2.62 with java -jar encoder.jar -l resources\uk.properties -i rotatescreen.txt -o inject.bin and all comes up ok. Thanks for any help ps not sure if it affects it, I changed the vid pid placing vidpid.bin on the root of the sd.

I'd use a script with mdk3 for that. Add the macs you want to whitelist in the script. Search the forums, I think someone put up an example script which you could modify. If you think you'll have poblem, yes use the alfa in the kali vm and just have the pineapple with karma running.

If its just accessesing the web gui, as above. If its setting up ICS, sharing the internet on your computer via an ethernet cable connected to the pineapple, then make sure you have windows firewall on, wont work if its turned off. On the lan for the pineapple, make sure 255.255.255.0 subnet mask and 8.8.8.8 set for primary dns. Also just after you enable sharing for the pineapple lan adapter on your internet facing adapter on your computer, go back and make sure 172.16.42.42, 255.255.255.0 subnet mask and 8.8.8.8 dns are still set as windows 7 will try to change these to 192.168.137.1 something if i remember correctly.

If you have an iphone or android device yourself, and connected to the same network just get a network scanner app, simple. Will show host names, MAC addresses and any open ports. Ah mis read your post, I'm guessing you want this info while the iphone is just sending out probes?

Im looking for the same thing, and although im not scared of doing any modding, since i dont have a usb hub already id rather not do any cutting if i have to. What do you think of this: https://www.modmypi.com/New-Link-4-Port-USB-Hub-%28USB-2.0-with-Mains-Adaptor%29

Hi All, First time user here and before I ask my question I'd just like to say a big thankyou to all the people who have worked on the MKIV and the people who contribute to the forums and wikis. I bought myself an ap121u and flashed it in no time at all with little prior experience, couldnt have been easier. I've used a script provided by lsc on these forums to get my internet tethering via wifi and an alfa dongle working great, apart from one thing. Doesnt seem to change the mac address of the above mentioned dongle. Ive tried doing it manually and also setting a mac as per below. Ifconfig wlan1 down macchanger -m 00:11:22:33:44:55 wlan1 ifconfig wlan1 up Comes up with the error ERROR: Can't change MAC: interface up or not permission: Invalid argument after trying to change. Any ideas? Im probably overlooking something simple. I havent tried changing wlan0 yet but i guess that will be fine, is it because im not using the supported dongle? Driver issue? A point in the right direction or any help would be great. Thanks again Tom.