mrgray

Could it be a short in the motherboard? Like i can still flash over serial. And also there was no way it could short i had it in its case with a 12v 1amp netgear plug

I've tried everything, reflashing from 2.8.1 to 3.0.0 over serial, i've searched everywhere for a answer and i couldn't find one It was working on 3.0.0 but then it just went to the bootloop the next day.. Heres the log where it loops at like a reboot -------------------------------------------------------------------------- bytes [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 29132k/32768k available (2102k kernel code, 3636k reserved, 404k data, 208k init, 0k highmem) [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:51 [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) [ 0.080000] pid_max: default: 32768 minimum: 301 [ 0.080000] Mount-cache hash table entries: 512 [ 0.090000] NET: Registered protocol family 16 [ 0.090000] gpiochip_add: registered GPIOs 0 to 29 on device: ath79 [ 0.100000] MIPS: machine is ALFA NETWORKS Hornet-UB U-Boot 1.1.4-g971cc15e-dirty (Sep 7 2011 - 11:44:55) -------------------------------------------------------------------------- Thanks if the problem is resolved and sorry for asking so many questions.

Resolved for me, What was happening there was a miss type in the Fstab Configuration: Boot it without the flash drive then do this, my config if you want to just copy and past it in the Fstab Configuration, config global automount option from_fstab 1 option anon_mount 1 config global autoswap option from_fstab 1 option anon_swap 1 config mount option target /usb option device /dev/sda1 option fstype ext4 option options rw,sync option enabled 1 option enabled_fsck 0 config swap option device /dev/sda2 option enabled 1 ------------------------------- Save it then plug your usb in wait 5 mins then reboot it with the usb in.

I'm wondering how do you flashing the Mark IV with Arduino UNO? I don't have time to wait for my Serial TTL Cable come in, plus it would be awesome to do it with the Arduino. :) Thanks in advance and if it gets solved it should also have a tutorial pinned or in the wiki (+1 like) for each person who helps, thanks!

Thanks for mentioning that and i have stuff underneath it but i have done that before and i wanted to hit myself for being so stupid. -_- Anyways thanks so much for helping me out guys hope to have it fixed soon!

Yay could you show me the tutorial? Hope this works thanks a ton:) I couldn't seem to be able to find it..

I do have a Arduino Uno and i've seen people using it as a UART adapter Do you think this will work? Also a raspberry pi This sucks thank you for your fast help though

Thank you for your reply but i do not have a UART adapter sadly... Heres what it looks like http://postimg.org/image/tz0rqzvk3/

So i was messing around with my pineapple and the power went off, when i booted again it only shows the power light and nothing else like when booting the lights look all the same but then it just gets stuck i guess on the power light only if that makes any since i can't go into anything. I'm super worried my little baby got bricked please help, hopefully its just me being a noob.. Thanks in advance and i'll try and like your posts for +1 rep

Security, ports, VPN access and so on Plus i'm wanting to run it on the pineapple so that i don't need to bring my laptop for my setup, i travel a lot. No illegal purposes intended :)

Yay your amazing thanks 100x hope you can do it:)

I can't find it anywhere and if there is anything that will work for it could you please provide how to install it, thank you Or make a module for it with a auto start and etc, people would LOVE you for it:)

I havent been on here for a while and i was just wondering if the awus036nhr is compatible with the Pineapple And how do you set it up where your putting the tampered internet threw the ALFA from the pineapple?

How would i do so doing this setup and would this work? I'm wanting to use all my infusions and everything but i'm wanting it on a router that people are already connected to theoretically speaking It would go like this, Modem, the Ethernet cable from the modem to the pineapple poe port, than from the pineapple wan/lan port connected to the router that everyone is on. I'm wanting to do like a mitm attack and sslstrip stuff like that but without having to setup a bunch of stuff so i would just put it in the middle of the connection. I don't know if this will work or not i figured to ask to see if any of y'all have tested it. Sorry i haven't been on lately i've been super busy!

Main post Updated! Many thanks to overwraith! Credit goes to him and people who helped! If you have your own version of the codding please post it, i will not take credit from your own work. I'm looking at doing more coding and hard mods soon. Just been super busy!

Thanks guys! Hope this works! 1+ likes Sorry i'm the noob who always run into stupid errors -_-

Thanks for your reply I'm trying to spoof my awus036nha's mac for a network, I'm trying to connect to Wifi's but it won't show anything after i run those commands No networks at all

After i run ifconfig wlan0 down then ifconfig wlan0 up the awus036nha it wont scan in BT5 r3 What am i doing wrong?

I don't know its annoying i've looked threw all my configs, defaults and everything and nothing that i saw was the problem in the config files...

Didn't really have time to find the correct spot i'm at work. sorry

Thanks for all y'alls reply's! Great work! :)

First sorry if i put this in the wrong section Its for my pineapple advance case but this doesn't have to do with the pineapple necessarily. I'm running it on a netbook BT5 r3 I got the awus036nha running finally, i had to connect the awus036nha after BT booted and it would scan for hosts and everything. But after i run any of these types of commands it gets messed up, ifconfig wlan1 down macchanger --mac 00:22:44:66:88:00 wlan1 ifconfig wlan1 up Than would scan on wicd and it says, No wireless networks found. I don't get why it would stop? But if i reconnect the awus036nha it will work fine but i won't have my spoofed mac... Thanks in advance! Hope the problem gets resolved its driving me insane.

Mr-Protocol Why you gotta be so harsh Sorry

Thanks for your replies and i didn't mean to i was going to put something else so i deleted it but than realized it was stupid so i re typed the first reply again. I didn't even know it did that i thought it would be the same as "Editing" Can't you turn the Bump from deletion than re posting off?

What is the command to install on ssh? I'm having troubles, plus i'm on drugs.. Migraine prescription it makes you stupid -_-