Jump to content


Active Members
  • Posts

  • Joined

  • Last visited

Everything posted by d1000

  1. Well, it was the 1 in the fstab missing. Now swap works! Thanks people. Will dive now for sslstrip. Finallyyyyy! :)
  2. I understand now, I tought that could be the section cable to impose. Thanks! Today is a soldering day! :)
  3. Thanks that will do it. I believe the normal USB cable, only allow 500 mA normally. In my case, the Anker 3 10000mha output 2A and I should juice the hub with 2A to ensure there is no underpowered issues. Does anyone knows if this could limit the juice to 500mA?
  4. Lol ok IT WAS A USER ISSUE. (in my case, like almost every time!) In option anon_swap it is still set to 0, will try change to 1 when arrive home and let you guys know. Many thanks D1000
  5. Already did it, and the partition for swap does not appear like, so it look ok. Will try to follow this vídeo from one of our members just to my sure this is not a USER issue :p
  6. HI, I'm also trying to do a USB to DC but for my hub usb. I'm using a 3mm jack power and need to connect to a USB type A. The jack is + in center but I don't know how to map to USB internal conectores. Anyone has the diagram to this cable? Also, it needs to hold 2A. Thanks!
  7. Many thanks to both. Seb, It was actually really the sda/sdb setting. Foxtrot, I was following that article, but at the moment it doesn't appear as available in swap line. What information can help troubleshooting this issue? D1000
  8. Hi folks, A few weeks after, my new usb hub finally arrived! Using 2.7.7. in MKIV and at the moment here is the status: 3G pen - OK USB hub - I believe ok (still in brick power just in case) SanDisk 4GB - Half OK - Appear in resources, but no option to install infusions in USB storage. In none of the several infusions. Does anyone knows what can it be? Here it goes my logs and setup pic. Many thanks! P.S- Baby steps, almost there! :P lsusb Output Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 005: ID 12d1:1001 Huawei Technologies Co., Ltd. E169/E620/E800 HSDPA Modem Bus 001 Device 004: ID 0781:5571 SanDisk Corp. fstab Configuration Execute: ls /dev/* Execute: dmesg Disk Usage System Log (refresh)
  9. Hi webdirector, Will post my fstab no prob asap. But in my case, I could mount one of the two partitions and when try to use disappeared again. Still waiting for a working usb hub to identify if was a power issue like most of this problem. Will post it today or tomorrow, sorry for the delay. Cheers, D1000
  10. Hi guys, As promissed just to let you guys now that 2.7.7 fixed my 3G problem. Many thanks to Sebkinne for his work and interest in user satisfation. Next steps for me, waiting for a new usb powered hub to try the setup of MIV+4GBpen+3G+Alfa. Cheers. D1000
  11. Thanks Haroo, will need to buy a new powered usb hub but its not a easy task for this specific goal. FW 2.7.7, will test as soon as I arrive home. D1000
  12. Hi Haroo, thanks for your input. Regarding the powered hub, I didn't check the polarity :( will buy a new one and check that. Can you point me to your especific model and let me know if you needed to invert yours? Do you juice it at 9 or 12v? Absolutly agree about the curving learn, still learning to deal with power and usb issues in pineapple. Thanks!
  13. Hi Scout, No news about this issues? I believe your post describes 100% my experience with MKIV. Thanks, D1000
  14. Hi guys, Like I said before, one of the diferences between the modem behavior in 2.7.5. and 2.7.0 is the model. in 2.7.5. USB Connections Bus 001 Device 002: ID 12d1:1446 Huawei Technologies Co., Ltd. E1552/E1800/E173 (HSPA modem) Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub In 2.7.0. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 12d1:1001 Huawei Technologies Co., Ltd. E169/E620/E800 HSDPA Modem The other is "ls /dev/tty*" In 2.7.5. Execute: ls /dev/tty* /dev/tty /dev/ttyATH0 /dev/ttyS0 In 2.7.0. Execute: ls /dev/tty* /dev/tty /dev/ttyATH0 /dev/ttyS0 /dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2 Because I needed to work with 3G pen, I downgrade to 2.7.0. and everything is working with 3g pen connectivity. Hope it helps debbugging 2.7.5. Cheers, D1000
  15. Glad it's not a iPhone too! Hate Apple lol In my case, just loosing most of the battles with my Pineapple from day 1, but hey still fighting with it! The end of war is still far! Hoping for a stable 2.8.0 that could fixe some of my issues with USB. :)
  16. In version 2.7.0 and 2.7.4 I also did for the 3G and microsd for a day lol, then dissapear with no reason at all. In 2.7.5 the pen model is detected now with diferent model and the ajustment in 3g script does not work. Always returning "usb-modeswitch: switching seemingly failed". Where can I reach the 2.7.0 without OTA? Would like to flash because without that I'm stuck in 2.7.5. Thxs
  17. Thanks for your opinion. 1) far from comparing with a product like iphone, but for me this is a overpriced product when does not deliver what is suppost to. 2) I did not pay for HW alone, read the Hak5 site and you will find that you are buying a product with a hak framework in it. Thats the all purpose of the product. If not BT5 would do the work for me. 3) Agree with you, but this is my opinion regarding the stable of the product and not the good will of the comunity. 4) The purpose of a forum is to let other folks now what they can expect if they buy the product. This is not beeing bully or "smartass", thats my 5cents like you give yours. I remember that I'm trying to solved this for weeks, and with more than 200 dolars spend with no return at all. Over and out. Cheers. D1000
  18. Sebkinne, I don't put in question your great effort in try to help me and other folks. But, first, I post, my 3G script, the system logs, the errors and also what changed. What logs do your talk about I didn't show? Since I bought pineapple, I've tried 3 battery packs, no usb working until now. 4 diferente types of storage, 3x 3G pens ... Sorry but If we look for the principal threads that exist in the fórum, a HUGE number of them are regarding, POWER, USB and 3G. Sorry mate, but until now, the product doesn't worth the Money! Just my opinion... Thanks for your help and effort ;)
  19. I've changed like I put in spoiler, just changed the model from 1001 to 1446. Still doesn't work. Sorry man, this product is to raw yet :(
  20. Well, what doesn't work in regards to 3g? Is it all configured properly? D1000: Well, after 2.7.5 the huawei is detected as a diffent model. USB Connections Bus 001 Device 002: ID 12d1:1446 Huawei Technologies Co., Ltd. E1552/E1800/E173 (HSPA modem) Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 3G: System Log (refresh) Previous versions detected like this: USB Connections Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 12d1:1001 Huawei Technologies Co., Ltd. E169/E620/E800 HSDPA Modem
  21. Thanks for you interest in my worries. Well now I was trying to put 3G to work and guess what? Not working! After that, unpluged the anker, bricked to Wall the pineapple, put the scandisk 4G and worked! Execute: ls /dev/sd* /dev/sda /dev/sda1 /dev/sda2 Both sda1 and 2 appear in resources. Now its the 3G that don't work. I honestly don't understand the unstability,...
  22. My new powered usb was powered using anker 10k output barrel directly to usb hub. The light appears up and down in intensity, then smell burn and that's all. No more NEW hub. 200 € after, still no USB drive in pineapple, or hub usb working. Almost two months after bought, the only think that works fine is 3g pen without microsd in it. So sad about this produt :(
  • Create New...