Jump to content

Scanner Martel

Active Members
 View Profile  See their activity

  • Posts

    45

  • Joined

  • Last visited

 Content Type 

Everything posted by Scanner Martel

  1. Scanner Martel
    I just bricked the POS sandisk drive from the hakshop. I want to get something with more storage space but that wont suck up a lot of pineapple juice. any suggestions?
  2. Scanner Martel
    do this in ubuntu or sshing into pineapple?
  3. Scanner Martel
    same dilemma. No Love.
  4. Scanner Martel
    i tried reformatting and it failed and sayed it was read only. Its the hakshop san disk. you think i should get ahold of them instead of sandisk?
  5. Scanner Martel
    After a long battle trying to get the USB set up for the pineapple i had a breakthrough but am not out of the woods yet. The device appears in the USB tab of the web GUI (image 1) and im no longer having to reset the pineapple when i plug the USB in, but when i SSH in through putty and issue the "mkswap /dev/sda2" command i get a message that says that its a read only file system (image 3). My instinct is telling me that i should just change this to read-write, so if anyone knows how to do this, or if this isnt what i should be doing. PLEASE PLEASE PLEASE let me know. also i tried issuing the "df -h" command and dont see the drive (image 2) Much appreciated, -SM (image 1) (image 2) (image 3)
  6. Scanner Martel
    @ jcc10. You got anything in your log that says whats going on. I wana see if theres some overlap My log 00:00:39 Pineapple kern.info kernel: [ 11.690000] USB Mass Storage support registered. 00:00:39 Pineapple kern.info kernel: [ 11.680000] usbcore: registered new interface driver usb-storage 00:00:39 Pineapple kern.info kernel: [ 11.680000] Initializing USB Mass Storage driver... 00:00:39 Pineapple kern.info kernel: [ 11.560000] uhci_hcd: USB Universal Host Controller Interface driver 00:00:39 Pineapple kern.info kernel: [ 11.440000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 00:00:39 Pineapple kern.info kernel: [ 11.310000] hub 1-0:1.0: USB hub found 00:00:39 Pineapple kern.info kernel: [ 11.310000] hub 1-0:1.0: 1 port detected 00:00:39 Pineapple kern.info kernel: [ 11.310000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00 00:00:39 Pineapple kern.info kernel: [ 11.290000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000 00:00:39 Pineapple kern.info kernel: [ 11.250000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1 00:00:39 Pineapple kern.info kernel: [ 11.250000] ehci-platform ehci-platform: Generic Platform EHCI Controller 00:00:39 Pineapple kern.err kernel: [ 37.450000] Error: Driver 'gpio-keys-polled' is already registered, aborting... 00:00:39 Pineapple kern.debug kernel: [ 34.700000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' 00:00:39 Pineapple kern.debug kernel: [ 34.700000] Registered led device: ath9k-phy0 00:00:39 Pineapple kern.debug kernel: [ 34.690000] ath: doing EEPROM country->regdmn map search 00:00:39 Pineapple kern.debug kernel: [ 34.690000] ath: country maps to regdmn code: 0x37 00:00:39 Pineapple kern.debug kernel: [ 34.690000] ath: Regpair used: 0x37 00:00:39 Pineapple kern.debug kernel: [ 34.690000] ath: EEPROM regdomain: 0x833a 00:00:39 Pineapple kern.debug kernel: [ 34.690000] ath: EEPROM indicates we should expect a country code 00:00:39 Pineapple kern.debug kernel: [ 34.690000] ath: Country alpha2 being used: GB
  7. Scanner Martel
    I was also using mini tool partition and tried it on an ubuntu 11.10 VM. Didnt work. Partitioning went well. But now plugging in the USB brings me right back to a dropped connection and the flashing WPS light. This should not be this flipping tedious/ impossible!
  8. Scanner Martel
    let me know
  9. Scanner Martel
    I did and I will. Thank ya kindly
  10. Scanner Martel
    Ive got the Mark IV running 2.7 on windows 8. I have my pineapple tethered via Ethernet and sharing enabled.The problem im having is that when a device connects to an open network automatically, the pineapple receives the request and successfully associated according to the log page. with DNS spoof enabled it all looks good until the client tries to navigate the web. Two things have been happening. First is whenever the client tries to go to any site the load bar goes to about a third of the way and the page never loads regardless of whether it is a spoofed HTML site from the www folder or its just supposed to forward to the real site. Nothing works. Its like Karma is supposed to be a tool to disable internet access. But when the clients connect to the SSID broadcasted by the pineapple intentionally, ie selecting the network, everything works swimmingly as long as karma is disabled. clients have internet access and are either forwarded to their destination or the HTML page from the pineapple. The second thing thats happening is that occasionally when karma is enabled and a device connects to an open network from memory it will occasionally just switch over to the pineapple SSID. This may have something to do with the fact that the first network isnt providing internet access due to the fore mentioned problem. Let me know if you have any ideas. Thanks all.
  11. Scanner Martel
    You may have meant this all as given but im just gona give Occam's razor the credit its due. Have formatted to Ext4? What OS are you using, and how are you formatting? last simple solution i could think of is have you changed the config swap to 1? (don't need USB to be plugged in to do this). if it aint these then we ser are in the same boat. I fixed the reboot problem by going over these features and now it reads the USB ( the light goes on, and it shows the device in the USB section of the web GUI) but its not expanding the disk space in the resources section. And its Mr. Scanner.
  12. Scanner Martel
    have you issued the "mkswap /dev/sda2" cmd in the advanced tab?
  13. Scanner Martel
    That great, thanks for the help Coop.
  14. Scanner Martel
    No i havent gone anywhere from the pineapple yet so im not to worried about a security breach. I guess i was just wondering if the files should be there even if they were blank. Also, for secure ssh connection between my laptop and the pineapple would i just do it like i was trying to connect to any VPS? i mean could i use the putty keygen to create a key pair, and put the public key on the pineapple, etc? cuz it seams like the pineapple is set up to do the opposite as it has its own key generator to hand out its own public keys. thanks for the feedback. I'm still very new to a lot of this stuff so sorry if these questions are a bit on the elementary side.
  15. Scanner Martel
    right on. hopefully we'll get some answers. I NEED MORE SPACE!
  16. Scanner Martel
    Hey all, as the topic pretty much lays out, my question is whether the /root/.ssh of the pineapple mark IV supposed to be empty? theres no known_host, or anything else. i just re-flashed and still nothing. Im also having some problems with karma and the USB so im trying to figure out if theres like some files missing, or more likely my noobness is preventing me from getting all setup. Anyone whose willing to talk me through some of this stuff will receive no money, but when you die, on your deathbed you will receive total consciousness..... which would be nice. So ya, if you know about the host thing or you wana help a brother out leave a post. Thanks. -Scanner Martel
  17. Scanner Martel
    Im having the same problem with the 4 gig san disk from the hack shop.
  18. Scanner Martel
    Hello all, 2 part question. First, cant seem to get my little 4gig san disk working on the pineapple mk4. I've got it formated to Ext4 and partitioned to an 80-20 split. When i plug it in. the USB light comes on and the disk is listed in the lsusb Output tab as "Bus 001 Device 003: ID 0781:5530 SanDisk Corp. Cruzer". I did the whole "mkswap /dev/sda2" command in advanced. The problem is that when i check the resources tab the disk space hasnt done up. The one thing i havent done that the pineapple booklet says is that because im formating and partitioning with windows minipartition tool instead of linux the process was a little different. I didnt see an option uncheck the take ownership box because there didnt seem to bee one. Is this a major problem, and is this normally enabled by default? Second question is if im not concerned about battery life can i just use a toshiba external HDD thats got two Ext4 partitions to store data. I have the drive partitioned into about 4 parts. 2 of which are the 80-20 split and ext4 format. It has the same problem as the little san disk. i.e shows up in the lsusb output but doesnt acctually increase disk space. Let me know what u think the deal is. Thanks
  19. Scanner Martel
    Indeed it did. Thank ya kindly stranger.
  20. Scanner Martel
    I just got the Mark IV pineapple and Im ready to get the road on the show. I followed the instructions in the booklet for "Connecting for the first time" with windows Ethernet testing- I'm running windows 8- but after configuring my home WiFi (internet facing adapter) and the LAN connection (Pineapple Facing Adapter) as illustrated in the booklet I still cant connect to 172.16.42.1/pineapple in my web browser.Whenever i try i just get a php.redirect and whatever page im on just reloads. my WiFi IPv4 and DNS is set to automatically obtain (Image 1) and pineapple settings are in Image 2. What do I need to do to get into the pineapple GUI!? any help would be greatly appreciated. Any additional info you may need just let me know. Image 1 Image 2
×
×
  • Create New...