LinuxDad

I had many similar issues attempting to keep everything in the native WindBlows (sorry, freudian slip) environment. I finally restored to using vmware (in this case vmplayer-free) and a copy of Backtrack to implement the configuration using the wp4.sh script. I was immediately able to connect (I think that there are some additional server/service issues in WindBlows that you do not get in Windows 7 without get the server edition), and have complete control of the networking information needed to use the Pineapple. An added plus is the ability to use Backtrack along with the Pineapple. That's a Win-Win.

Sure, awaiting the new version.

I am also receiving the SSH Connection status, just after restarting the Pineapple. It appears that autossh is starting or attempting to start the connection: 00:01:00 Pineapple kern.info kernel: [ 60.790000] br-lan: port 1(eth0) entered forwarding state 00:00:59 Pineapple user.info autossh[2008]: starting ssh (count 5) 00:00:59 Pineapple user.info autossh[2008]: starting ssh (count 4) 00:00:59 Pineapple user.info autossh[2008]: starting ssh (count 3) 00:00:59 Pineapple user.info autossh[2008]: starting ssh (count 2) 00:00:59 Pineapple user.info autossh[2008]: starting ssh (count 1) 00:00:59 Pineapple user.info autossh[2008]: ssh exited with error status 1; restarting ssh 00:00:59 Pineapple user.info autossh[2008]: ssh exited with error status 1; restarting ssh 00:00:59 Pineapple user.info autossh[2008]: ssh exited with error status 1; restarting ssh 00:00:59 Pineapple user.info autossh[2008]: ssh exited with error status 1; restarting ssh 00:00:59 Pineapple user.info autossh[2008]: ssh exited with error status 1; restarting ssh 00:00:59 Pineapple user.info autossh[2008]: ssh child pid is 2020 00:00:59 Pineapple user.info autossh[2008]: ssh child pid is 2019 00:00:59 Pineapple user.info autossh[2008]: ssh child pid is 2012 00:00:59 Pineapple user.info autossh[2008]: ssh child pid is 2011 00:00:59 Pineapple user.info autossh[2008]: ssh child pid is 2010 00:00:59 Pineapple daemon.notice netifd: wan (2004): udhcpc (v1.19.4) st Then I see it doing the following: 00:01:10 Pineapple authpriv.warn dropbear[2336]: Failed listening on '22': Error listening: Address already in use 00:01:10 Pineapple authpriv.info dropbear[2336]: Premature exit: No listening ports available. 00:01:09 Pineapple user.info autossh[2008]: starting ssh (count 7) 00:01:09 Pineapple user.info autossh[2008]: ssh exited with error status 1; restarting ssh 00:01:09 Pineapple user.info autossh[2008]: ssh child pid is 2253 And lastly, these seemed relevent as well: 15:37:10 Pineapple user.info autossh[2008]: starting ssh (count 8) 15:37:10 Pineapple user.info autossh[2008]: ssh exited with error status 1; restarting ssh 15:37:10 Pineapple user.info autossh[2008]: ssh child pid is 2432 00:01:13 Pineapple user.info sysinit: sh: write error: Invalid argument 00:01:13 Pineapple user.info sysinit: sh: write error: Invalid argument Hope that helps.

Nice, this is a great test for WIPS devices in the secure network boundaries. Thank you for posting this.

Nice packaging. Security through obscurity? I love the Camera bag idea, but why broadcast the antenna outside of the bag? does the fabric attenuate the signal that much?

OK, I found the RandomRoll module in the Pineapple Bar. I think that what I really want is the Man in the Middle module.

I can Beta Test for you.

I am not able to download the files from: http://www.mediafire.com/file/ccyejfyph17993t/web.zip are they still available?

I will now!

I resolved this problem by using a Linux Based VM to route the Wireless traffic through the PC. The Pineapple worked well when connected directly to a netowkr, but attempting to permit the pineapple to connect to the internet via the Laptop (running Windows 7), simpley does not work. The reason for this is that Microsoft has removed the routing capabilities on the Windows 7 personal platforms, requiring a license to a server based version in order to perform the same functionality that was possible on Windows XP. The short answer is to install the VMWare player, and run either backtrack, or your favorite version of Linux to configure the interfaces, and then use the wp4.sh script. Hope that helps future Pineapple users.

Is there a guide for the opkg command, the resources that are available, and the ability to install updates to the USB device? I think that we can put something together for the Wiki if we can get the information together.

The Link on the top of the Jasager Forum indicated that the Wiki is on: http://forums.hak5.org/index.php?/forum-49/announcement-7-wifi-pineapple-wiki-page/ however the page indicates that this has moved to: http://cloud.wifipineapple.com/wiki/doku.php Thank you.

Thanks, I would like to see this as well.

Hey Whistlemaster, where do I find these modules or scripts?

I have the 2.7.0 version of the Pineapple firmware. I have installed sitesurvey, opkgmanager, sslstrip, status and Network manager. My goal was to test the sslstrip module. So I fired up the Pineapple, and connected to the SSID, but I got nowhere. My Pineapple is directly connected to the network via a switch to port eth1. Two questions here: 1. Normally if I'm in the field, the pineapple will route through my laptop, correct? (I'm guessing via eth0). 2. Do I need to enamle ICS via the Network Monitor in order to connect to the Internet via the Pineapple's SSID? I enabled the ICS from wlan0 to eth1, and confirmed the following iptables rules: root@Pineapple:~# iptables -nL Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- 172.16.42.0 0.0.0.0/0 state NEW ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED Chain OUTPUT (policy ACCEPT) target prot opt source destination The routing table also supports the use of the Default Gateway. root@Pineapple:~# netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth1 172.16.42.0 0.0.0.0 255.255.255.0 U 0 0 0 br-lan 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 Unfortunately, my SSH Connection from my Laptop hangs up, as well as the web connections to websites are not working. What am I missing?