Jump to content

securitycrush

Members
  • Posts

    2
  • Joined

  • Last visited

Everything posted by securitycrush

  1. Thanks barry - I will try to figure out why its not setting properly, even when I go into my Network settings and set it the right way. For some reason it's not changing the config.
  2. So we've recently acquired a handful of the MKIV's for work and I'm trying to get it to work on my Air. Trying to set it up to my Air, I've set the following: In Service Order: Wi-Fi: Configure IPv4: Using DHCP IPv4 Address: 192.168.1.10 Subnet Mask: 255.255.255.0 Router: 192.168.1.1 DNS: 8.8.8.8 Thunderbolt Ethernet Configure IPv4: Manually IP Address: 172.16.42.42 Subnet Mask: 255.255.255.0 DNS: 8.8.8.8 Internet Sharing: On (Thunderbolt Ethernet) I tried running the wp4.sh through terminal and it hangs after entering the last prompt, I have to CTRL+C to get out of it. I've also tried setting it up within Ubuntu 12.04 using the wp4.sh script within a VM with 2 bridged adapters setup for wireless and ethernet, however, only one will connect and the other constantly flashes in the status bar saying not connect (ethernet). Pinging 172.16.42.1 does not work. I can use my wireless no problem, however, for some reason ethernet is not working - even with wireless off just to see if that matters. I've attached my network settings for my Air below. I've tried both in the WAN and PoE/LAN ports. MacBook-Air:jasegar SECAir$ ifconfig lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 stf0: flags=0<> mtu 1280 en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether b8:8d:12:0e:2a:c8 inet6 fe80::ba8d:12ff:fe0e:2ac8%en0 prefixlen 64 scopeid 0x4 inet 192.168.1.10 netmask 0xffffff00 broadcast 192.168.1.255 media: autoselect status: active[/font][/color] [color=#282828][font=helvetica, arial, sans-serif]p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304 ether 0a:8d:12:0e:2a:c8 media: autoselect status: inactive[/font][/color] [color=#282828][font=helvetica, arial, sans-serif]en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 options=b<RXCSUM,TXCSUM,VLAN_HWTAGGING> ether 40:6c:8f:37:8c:0e inet6 fe80::426c:8fff:fe37:8c0e%en2 prefixlen 64 scopeid 0x6 media: autoselect (100baseTX <full-duplex,flow-control>) status: active[/font][/color] [color=#282828][font=helvetica, arial, sans-serif]bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether ac:de:48:29:88:19 inet 192.168.2.1 netmask 0xffffff00 broadcast 192.168.2.255 Configuration: priority 0 hellotime 0 fwddelay 0 maxage 0 ipfilter disabled flags 0x2 member: en2 flags=3<LEARNING,DISCOVER> port 6 priority 0 path cost 0 [/CODE][/font][/color]
×
×
  • Create New...